diff options
Diffstat (limited to 'include/linux/usb')
| -rw-r--r-- | include/linux/usb/chipidea.h | 1 | ||||
| -rw-r--r-- | include/linux/usb/gadget.h | 3 | ||||
| -rw-r--r-- | include/linux/usb/hcd.h | 6 | ||||
| -rw-r--r-- | include/linux/usb/renesas_usbhs.h | 39 | ||||
| -rw-r--r-- | include/linux/usb/typec_mux.h | 62 |
5 files changed, 42 insertions, 69 deletions
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 911e05af671e..edd89b7c8f18 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -61,6 +61,7 @@ struct ci_hdrc_platform_data { #define CI_HDRC_OVERRIDE_PHY_CONTROL BIT(12) /* Glue layer manages phy */ #define CI_HDRC_REQUIRES_ALIGNED_DMA BIT(13) #define CI_HDRC_IMX_IS_HSIC BIT(14) +#define CI_HDRC_PMQOS BIT(15) enum usb_dr_mode dr_mode; #define CI_HDRC_CONTROLLER_RESET_EVENT 0 #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 7595056b96c1..fb19141151d8 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -310,7 +310,8 @@ struct usb_gadget_ops { int (*pullup) (struct usb_gadget *, int is_on); int (*ioctl)(struct usb_gadget *, unsigned code, unsigned long param); - void (*get_config_params)(struct usb_dcd_config_params *); + void (*get_config_params)(struct usb_gadget *, + struct usb_dcd_config_params *); int (*udc_start)(struct usb_gadget *, struct usb_gadget_driver *); int (*udc_stop)(struct usb_gadget *); diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index bb57b5af4700..bab27ccc8ff5 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -216,6 +216,9 @@ struct usb_hcd { #define HC_IS_RUNNING(state) ((state) & __ACTIVE) #define HC_IS_SUSPENDED(state) ((state) & __SUSPEND) + /* memory pool for HCs having local memory, or %NULL */ + struct gen_pool *localmem_pool; + /* more shared queuing code would be good; it should support * smarter scheduling, handle transaction translators, etc; * input size of periodic table to an interrupt scheduler. @@ -253,7 +256,6 @@ struct hc_driver { int flags; #define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */ -#define HCD_LOCAL_MEM 0x0002 /* HC needs local memory */ #define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */ #define HCD_USB11 0x0010 /* USB 1.1 */ #define HCD_USB2 0x0020 /* USB 2.0 */ @@ -461,6 +463,8 @@ extern int usb_add_hcd(struct usb_hcd *hcd, unsigned int irqnum, unsigned long irqflags); extern void usb_remove_hcd(struct usb_hcd *hcd); extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1); +int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr, + dma_addr_t dma, size_t size); struct platform_device; extern void usb_hcd_platform_shutdown(struct platform_device *dev); diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index 53924f8e840c..6914475bbc86 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -3,6 +3,7 @@ * Renesas USB * * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> * * This program is distributed in the hope that it will be useful, @@ -33,17 +34,6 @@ enum { }; /* - * callback functions table for driver - * - * These functions are called from platform for driver. - * Callback function's pointer will be set before - * renesas_usbhs_platform_callback :: hardware_init was called - */ -struct renesas_usbhs_driver_callback { - int (*notify_hotplug)(struct platform_device *pdev); -}; - -/* * callback functions for platform * * These functions are called from driver for platform @@ -180,23 +170,20 @@ struct renesas_usbhs_driver_param { */ int pio_dma_border; /* default is 64byte */ - uintptr_t type; u32 enable_gpio; /* * option: */ - u32 has_otg:1; /* for controlling PWEN/EXTLP */ - u32 has_sudmac:1; /* for SUDMAC */ u32 has_usb_dmac:1; /* for USB-DMAC */ + u32 runtime_pwctrl:1; + u32 has_cnen:1; + u32 cfifo_byte_addr:1; /* CFIFO is byte addressable */ #define USBHS_USB_DMAC_XFER_SIZE 32 /* hardcode the xfer size */ + u32 multi_clks:1; + u32 has_new_pipe_configs:1; }; -#define USBHS_TYPE_RCAR_GEN2 1 -#define USBHS_TYPE_RCAR_GEN3 2 -#define USBHS_TYPE_RCAR_GEN3_WITH_PLL 3 -#define USBHS_TYPE_RZA1 4 - /* * option: * @@ -212,12 +199,6 @@ struct renesas_usbhs_platform_info { struct renesas_usbhs_platform_callback platform_callback; /* - * driver set these callback functions pointer. - * platform can use it on callback functions - */ - struct renesas_usbhs_driver_callback driver_callback; - - /* * option: * * driver use these param for some register @@ -230,12 +211,4 @@ struct renesas_usbhs_platform_info { */ #define renesas_usbhs_get_info(pdev)\ ((struct renesas_usbhs_platform_info *)(pdev)->dev.platform_data) - -#define renesas_usbhs_call_notify_hotplug(pdev) \ - ({ \ - struct renesas_usbhs_driver_callback *dc; \ - dc = &(renesas_usbhs_get_info(pdev)->driver_callback); \ - if (dc && dc->notify_hotplug) \ - dc->notify_hotplug(pdev); \ - }) #endif /* RENESAS_USB_H */ diff --git a/include/linux/usb/typec_mux.h b/include/linux/usb/typec_mux.h index 43f40685e53c..873ace5b0cf8 100644 --- a/include/linux/usb/typec_mux.h +++ b/include/linux/usb/typec_mux.h @@ -3,54 +3,48 @@ #ifndef __USB_TYPEC_MUX #define __USB_TYPEC_MUX -#include <linux/list.h> #include <linux/usb/typec.h> struct device; +struct typec_mux; +struct typec_switch; +struct fwnode_handle; -/** - * struct typec_switch - USB Type-C cable orientation switch - * @dev: Switch device - * @entry: List entry - * @set: Callback to the driver for setting the orientation - * - * USB Type-C pin flipper switch routing the correct data pairs from the - * connector to the USB controller depending on the orientation of the cable - * plug. - */ -struct typec_switch { - struct device *dev; - struct list_head entry; - - int (*set)(struct typec_switch *sw, enum typec_orientation orientation); -}; +typedef int (*typec_switch_set_fn_t)(struct typec_switch *sw, + enum typec_orientation orientation); -/** - * struct typec_switch - USB Type-C connector pin mux - * @dev: Mux device - * @entry: List entry - * @set: Callback to the driver for setting the state of the mux - * - * Pin Multiplexer/DeMultiplexer switch routing the USB Type-C connector pins to - * different components depending on the requested mode of operation. Used with - * Accessory/Alternate modes. - */ -struct typec_mux { - struct device *dev; - struct list_head entry; - - int (*set)(struct typec_mux *mux, int state); +struct typec_switch_desc { + struct fwnode_handle *fwnode; + typec_switch_set_fn_t set; + void *drvdata; }; struct typec_switch *typec_switch_get(struct device *dev); void typec_switch_put(struct typec_switch *sw); -int typec_switch_register(struct typec_switch *sw); +struct typec_switch * +typec_switch_register(struct device *parent, + const struct typec_switch_desc *desc); void typec_switch_unregister(struct typec_switch *sw); +void typec_switch_set_drvdata(struct typec_switch *sw, void *data); +void *typec_switch_get_drvdata(struct typec_switch *sw); + +typedef int (*typec_mux_set_fn_t)(struct typec_mux *mux, int state); + +struct typec_mux_desc { + struct fwnode_handle *fwnode; + typec_mux_set_fn_t set; + void *drvdata; +}; + struct typec_mux * typec_mux_get(struct device *dev, const struct typec_altmode_desc *desc); void typec_mux_put(struct typec_mux *mux); -int typec_mux_register(struct typec_mux *mux); +struct typec_mux * +typec_mux_register(struct device *parent, const struct typec_mux_desc *desc); void typec_mux_unregister(struct typec_mux *mux); +void typec_mux_set_drvdata(struct typec_mux *mux, void *data); +void *typec_mux_get_drvdata(struct typec_mux *mux); + #endif /* __USB_TYPEC_MUX */ |