diff options
Diffstat (limited to 'include/linux/usb')
| -rw-r--r-- | include/linux/usb/chipidea.h | 1 | ||||
| -rw-r--r-- | include/linux/usb/composite.h | 8 | ||||
| -rw-r--r-- | include/linux/usb/gadget.h | 9 | ||||
| -rw-r--r-- | include/linux/usb/hcd.h | 17 | ||||
| -rw-r--r-- | include/linux/usb/ljca.h | 145 | ||||
| -rw-r--r-- | include/linux/usb/pd.h | 1 | ||||
| -rw-r--r-- | include/linux/usb/pd_vdo.h | 1 | ||||
| -rw-r--r-- | include/linux/usb/renesas_usbhs.h | 10 | ||||
| -rw-r--r-- | include/linux/usb/typec.h | 37 | ||||
| -rw-r--r-- | include/linux/usb/typec_dp.h | 28 | ||||
| -rw-r--r-- | include/linux/usb/typec_tbt.h | 1 |
11 files changed, 244 insertions, 14 deletions
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 0b4f2d5faa08..5a7f96684ea2 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -64,6 +64,7 @@ struct ci_hdrc_platform_data { #define CI_HDRC_PMQOS BIT(15) #define CI_HDRC_PHY_VBUS_CONTROL BIT(16) #define CI_HDRC_HAS_PORTSC_PEC_MISSED BIT(17) +#define CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS BIT(18) enum usb_dr_mode dr_mode; #define CI_HDRC_CONTROLLER_RESET_EVENT 0 #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 6014340ba980..af3cd2aae4bc 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -35,6 +35,14 @@ * are ready. The control transfer will then be kept from completing till * all the function drivers that requested for USB_GADGET_DELAYED_STAUS * invoke usb_composite_setup_continue(). + * + * NOTE: USB_GADGET_DELAYED_STATUS must not be used in UDC drivers: they + * must delay completing the status stage for 0-length control transfers + * regardless of the whether USB_GADGET_DELAYED_STATUS is returned from + * the gadget driver's setup() callback. + * Currently, a number of UDC drivers rely on USB_GADGET_DELAYED_STATUS, + * which is a bug. These drivers must be fixed and USB_GADGET_DELAYED_STATUS + * must be contained within the composite framework. */ #define USB_GADGET_DELAYED_STATUS 0x7fff /* Impossibly large value */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 75bda0783395..6532beb587b1 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -711,6 +711,15 @@ static inline int usb_gadget_check_config(struct usb_gadget *gadget) * get_interface. Setting a configuration (or interface) is where * endpoints should be activated or (config 0) shut down. * + * The gadget driver's setup() callback does not have to queue a response to + * ep0 within the setup() call, the driver can do it after setup() returns. + * The UDC driver must wait until such a response is queued before proceeding + * with the data/status stages of the control transfer. + * + * NOTE: Currently, a number of UDC drivers rely on USB_GADGET_DELAYED_STATUS + * being returned from the setup() callback, which is a bug. See the comment + * next to USB_GADGET_DELAYED_STATUS for details. + * * (Note that only the default control endpoint is supported. Neither * hosts nor devices generally support control traffic except to ep0.) * diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 61d4f0b793dc..00724b4f6e12 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -484,8 +484,25 @@ extern int usb_hcd_pci_probe(struct pci_dev *dev, extern void usb_hcd_pci_remove(struct pci_dev *dev); extern void usb_hcd_pci_shutdown(struct pci_dev *dev); +#ifdef CONFIG_USB_PCI_AMD extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev); +static inline bool usb_hcd_amd_resume_bug(struct pci_dev *dev, + const struct hc_driver *driver) +{ + if (!usb_hcd_amd_remote_wakeup_quirk(dev)) + return false; + if (driver->flags & (HCD_USB11 | HCD_USB3)) + return true; + return false; +} +#else /* CONFIG_USB_PCI_AMD */ +static inline bool usb_hcd_amd_resume_bug(struct pci_dev *dev, + const struct hc_driver *driver) +{ + return false; +} +#endif extern const struct dev_pm_ops usb_hcd_pci_pm_ops; #endif /* CONFIG_USB_PCI */ diff --git a/include/linux/usb/ljca.h b/include/linux/usb/ljca.h new file mode 100644 index 000000000000..47661feda96c --- /dev/null +++ b/include/linux/usb/ljca.h @@ -0,0 +1,145 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2023, Intel Corporation. All rights reserved. + */ +#ifndef _LINUX_USB_LJCA_H_ +#define _LINUX_USB_LJCA_H_ + +#include <linux/auxiliary_bus.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +#define LJCA_MAX_GPIO_NUM 64 + +#define auxiliary_dev_to_ljca_client(auxiliary_dev) \ + container_of(auxiliary_dev, struct ljca_client, auxdev) + +struct ljca_adapter; + +/** + * typedef ljca_event_cb_t - event callback function signature + * + * @context: the execution context of who registered this callback + * @cmd: the command from device for this event + * @evt_data: the event data payload + * @len: the event data payload length + * + * The callback function is called in interrupt context and the data payload is + * only valid during the call. If the user needs later access of the data, it + * must copy it. + */ +typedef void (*ljca_event_cb_t)(void *context, u8 cmd, const void *evt_data, int len); + +/** + * struct ljca_client - represent a ljca client device + * + * @type: ljca client type + * @id: ljca client id within same client type + * @link: ljca client on the same ljca adapter + * @auxdev: auxiliary device object + * @adapter: ljca adapter the ljca client sit on + * @context: the execution context of the event callback + * @event_cb: ljca client driver register this callback to get + * firmware asynchronous rx buffer pending notifications + * @event_cb_lock: spinlock to protect event callback + */ +struct ljca_client { + u8 type; + u8 id; + struct list_head link; + struct auxiliary_device auxdev; + struct ljca_adapter *adapter; + + void *context; + ljca_event_cb_t event_cb; + /* lock to protect event_cb */ + spinlock_t event_cb_lock; +}; + +/** + * struct ljca_gpio_info - ljca gpio client device info + * + * @num: ljca gpio client device pin number + * @valid_pin_map: ljca gpio client device valid pin mapping + */ +struct ljca_gpio_info { + unsigned int num; + DECLARE_BITMAP(valid_pin_map, LJCA_MAX_GPIO_NUM); +}; + +/** + * struct ljca_i2c_info - ljca i2c client device info + * + * @id: ljca i2c client device identification number + * @capacity: ljca i2c client device capacity + * @intr_pin: ljca i2c client device interrupt pin number if exists + */ +struct ljca_i2c_info { + u8 id; + u8 capacity; + u8 intr_pin; +}; + +/** + * struct ljca_spi_info - ljca spi client device info + * + * @id: ljca spi client device identification number + * @capacity: ljca spi client device capacity + */ +struct ljca_spi_info { + u8 id; + u8 capacity; +}; + +/** + * ljca_register_event_cb - register a callback function to receive events + * + * @client: ljca client device + * @event_cb: callback function + * @context: execution context of event callback + * + * Return: 0 in case of success, negative value in case of error + */ +int ljca_register_event_cb(struct ljca_client *client, ljca_event_cb_t event_cb, void *context); + +/** + * ljca_unregister_event_cb - unregister the callback function for an event + * + * @client: ljca client device + */ +void ljca_unregister_event_cb(struct ljca_client *client); + +/** + * ljca_transfer - issue a LJCA command and wait for a response + * + * @client: ljca client device + * @cmd: the command to be sent to the device + * @obuf: the buffer to be sent to the device; it can be NULL if the user + * doesn't need to transmit data with this command + * @obuf_len: the size of the buffer to be sent to the device; it should + * be 0 when obuf is NULL + * @ibuf: any data associated with the response will be copied here; it can be + * NULL if the user doesn't need the response data + * @ibuf_len: must be initialized to the input buffer size + * + * Return: the actual length of response data for success, negative value for errors + */ +int ljca_transfer(struct ljca_client *client, u8 cmd, const u8 *obuf, + u8 obuf_len, u8 *ibuf, u8 ibuf_len); + +/** + * ljca_transfer_noack - issue a LJCA command without a response + * + * @client: ljca client device + * @cmd: the command to be sent to the device + * @obuf: the buffer to be sent to the device; it can be NULL if the user + * doesn't need to transmit data with this command + * @obuf_len: the size of the buffer to be sent to the device + * + * Return: 0 for success, negative value for errors + */ +int ljca_transfer_noack(struct ljca_client *client, u8 cmd, const u8 *obuf, + u8 obuf_len); + +#endif diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h index c59fb79a42e8..eb626af0e4e7 100644 --- a/include/linux/usb/pd.h +++ b/include/linux/usb/pd.h @@ -228,6 +228,7 @@ enum pd_pdo_type { #define PDO_FIXED_UNCHUNK_EXT BIT(24) /* Unchunked Extended Message supported (Source) */ #define PDO_FIXED_FRS_CURR_MASK (BIT(24) | BIT(23)) /* FR_Swap Current (Sink) */ #define PDO_FIXED_FRS_CURR_SHIFT 23 +#define PDO_FIXED_PEAK_CURR_SHIFT 20 #define PDO_FIXED_VOLT_SHIFT 10 /* 50mV units */ #define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */ diff --git a/include/linux/usb/pd_vdo.h b/include/linux/usb/pd_vdo.h index b057250704e8..3a747938cdab 100644 --- a/include/linux/usb/pd_vdo.h +++ b/include/linux/usb/pd_vdo.h @@ -376,6 +376,7 @@ | ((vbm) & 0x3) << 9 | (sbu) << 8 | (sbut) << 7 | ((cur) & 0x3) << 5 \ | (vbt) << 4 | (sopp) << 3 | ((spd) & 0x7)) +#define VDO_TYPEC_CABLE_SPEED(vdo) ((vdo) & 0x7) #define VDO_TYPEC_CABLE_TYPE(vdo) (((vdo) >> 18) & 0x3) /* diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index d418c55523a7..372898d9eeb0 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -5,16 +5,6 @@ * Copyright (C) 2011 Renesas Solutions Corp. * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #ifndef RENESAS_USB_H #define RENESAS_USB_H diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h index 8fa781207970..a05d6f6f2536 100644 --- a/include/linux/usb/typec.h +++ b/include/linux/usb/typec.h @@ -202,6 +202,8 @@ struct typec_cable_desc { * @accessory: Audio, Debug or none. * @identity: Discover Identity command data * @pd_revision: USB Power Delivery Specification Revision if supported + * @attach: Notification about attached USB device + * @deattach: Notification about removed USB device * * Details about a partner that is attached to USB Type-C port. If @identity * member exists when partner is registered, a directory named "identity" is @@ -217,6 +219,9 @@ struct typec_partner_desc { enum typec_accessory accessory; struct usb_pd_identity *identity; u16 pd_revision; /* 0300H = "3.0" */ + + void (*attach)(struct typec_partner *partner, struct device *dev); + void (*deattach)(struct typec_partner *partner, struct device *dev); }; /** @@ -335,4 +340,36 @@ int typec_port_set_usb_power_delivery(struct typec_port *port, struct usb_power_ int typec_partner_set_usb_power_delivery(struct typec_partner *partner, struct usb_power_delivery *pd); +/** + * struct typec_connector - Representation of Type-C port for external drivers + * @attach: notification about device removal + * @deattach: notification about device removal + * + * Drivers that control the USB and other ports (DisplayPorts, etc.), that are + * connected to the Type-C connectors, can use these callbacks to inform the + * Type-C connector class about connections and disconnections. That information + * can then be used by the typec-port drivers to power on or off parts that are + * needed or not needed - as an example, in USB mode if USB2 device is + * enumerated, USB3 components (retimers, phys, and what have you) do not need + * to be powered on. + * + * The attached (enumerated) devices will be liked with the typec-partner device. + */ +struct typec_connector { + void (*attach)(struct typec_connector *con, struct device *dev); + void (*deattach)(struct typec_connector *con, struct device *dev); +}; + +static inline void typec_attach(struct typec_connector *con, struct device *dev) +{ + if (con && con->attach) + con->attach(con, dev); +} + +static inline void typec_deattach(struct typec_connector *con, struct device *dev) +{ + if (con && con->deattach) + con->deattach(con, dev); +} + #endif /* __LINUX_USB_TYPEC_H */ diff --git a/include/linux/usb/typec_dp.h b/include/linux/usb/typec_dp.h index 8d09c2f0a9b8..1f358098522d 100644 --- a/include/linux/usb/typec_dp.h +++ b/include/linux/usb/typec_dp.h @@ -67,8 +67,10 @@ enum { #define DP_CAP_UFP_D 1 #define DP_CAP_DFP_D 2 #define DP_CAP_DFP_D_AND_UFP_D 3 -#define DP_CAP_DP_SIGNALING BIT(2) /* Always set */ -#define DP_CAP_GEN2 BIT(3) /* Reserved after v1.0b */ +#define DP_CAP_DP_SIGNALLING(_cap_) (((_cap_) & GENMASK(5, 2)) >> 2) +#define DP_CAP_SIGNALLING_HBR3 1 +#define DP_CAP_SIGNALLING_UHBR10 2 +#define DP_CAP_SIGNALLING_UHBR20 3 #define DP_CAP_RECEPTACLE BIT(6) #define DP_CAP_USB BIT(7) #define DP_CAP_DFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(15, 8)) >> 8) @@ -78,6 +80,13 @@ enum { DP_CAP_UFP_D_PIN_ASSIGN(_cap_) : DP_CAP_DFP_D_PIN_ASSIGN(_cap_)) #define DP_CAP_PIN_ASSIGN_DFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \ DP_CAP_DFP_D_PIN_ASSIGN(_cap_) : DP_CAP_UFP_D_PIN_ASSIGN(_cap_)) +#define DP_CAP_UHBR_13_5_SUPPORT BIT(26) +#define DP_CAP_CABLE_TYPE(_cap_) (((_cap_) & GENMASK(29, 28)) >> 28) +#define DP_CAP_CABLE_TYPE_PASSIVE 0 +#define DP_CAP_CABLE_TYPE_RE_TIMER 1 +#define DP_CAP_CABLE_TYPE_RE_DRIVER 2 +#define DP_CAP_CABLE_TYPE_OPTICAL 3 +#define DP_CAP_DPAM_VERSION BIT(30) /* DisplayPort Status Update VDO bits */ #define DP_STATUS_CONNECTION(_status_) ((_status_) & 3) @@ -97,13 +106,24 @@ enum { #define DP_CONF_CURRENTLY(_conf_) ((_conf_) & 3) #define DP_CONF_UFP_U_AS_DFP_D BIT(0) #define DP_CONF_UFP_U_AS_UFP_D BIT(1) -#define DP_CONF_SIGNALING_DP BIT(2) -#define DP_CONF_SIGNALING_GEN_2 BIT(3) /* Reserved after v1.0b */ +#define DP_CONF_SIGNALLING_MASK GENMASK(5, 2) +#define DP_CONF_SIGNALLING_SHIFT 2 +#define DP_CONF_SIGNALLING_HBR3 1 +#define DP_CONF_SIGNALLING_UHBR10 2 +#define DP_CONF_SIGNALLING_UHBR20 3 #define DP_CONF_PIN_ASSIGNEMENT_SHIFT 8 #define DP_CONF_PIN_ASSIGNEMENT_MASK GENMASK(15, 8) /* Helper for setting/getting the pin assignment value to the configuration */ #define DP_CONF_SET_PIN_ASSIGN(_a_) ((_a_) << 8) #define DP_CONF_GET_PIN_ASSIGN(_conf_) (((_conf_) & GENMASK(15, 8)) >> 8) +#define DP_CONF_UHBR13_5_SUPPORT BIT(26) +#define DP_CONF_CABLE_TYPE_MASK GENMASK(29, 28) +#define DP_CONF_CABLE_TYPE_SHIFT 28 +#define DP_CONF_CABLE_TYPE_PASSIVE 0 +#define DP_CONF_CABLE_TYPE_RE_TIMER 1 +#define DP_CONF_CABLE_TYPE_RE_DRIVER 2 +#define DP_CONF_CABLE_TYPE_OPTICAL 3 +#define DP_CONF_DPAM_VERSION BIT(30) #endif /* __USB_TYPEC_DP_H */ diff --git a/include/linux/usb/typec_tbt.h b/include/linux/usb/typec_tbt.h index 63dd44b72e0c..c7a2153bd6f5 100644 --- a/include/linux/usb/typec_tbt.h +++ b/include/linux/usb/typec_tbt.h @@ -46,6 +46,7 @@ struct typec_thunderbolt_data { #define TBT_CABLE_OPTICAL BIT(21) #define TBT_CABLE_RETIMER BIT(22) #define TBT_CABLE_LINK_TRAINING BIT(23) +#define TBT_CABLE_ACTIVE_PASSIVE BIT(25) #define TBT_SET_CABLE_SPEED(_s_) (((_s_) & GENMASK(2, 0)) << 16) #define TBT_SET_CABLE_ROUNDED(_g_) (((_g_) & GENMASK(1, 0)) << 19) |