diff options
Diffstat (limited to 'include/linux/usb')
| -rw-r--r-- | include/linux/usb/composite.h | 2 | ||||
| -rw-r--r-- | include/linux/usb/hcd.h | 4 | ||||
| -rw-r--r-- | include/linux/usb/pd.h | 2 | ||||
| -rw-r--r-- | include/linux/usb/pd_vdo.h | 19 | ||||
| -rw-r--r-- | include/linux/usb/tcpm.h | 28 | ||||
| -rw-r--r-- | include/linux/usb/typec.h | 2 | ||||
| -rw-r--r-- | include/linux/usb/typec_tbt.h | 6 |
7 files changed, 52 insertions, 11 deletions
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 2040696d75b6..a2d229ab63ba 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -437,7 +437,7 @@ static inline struct usb_composite_driver *to_cdriver( #define OS_STRING_IDX 0xEE /** - * struct usb_composite_device - represents one composite usb gadget + * struct usb_composite_dev - represents one composite usb gadget * @gadget: read-only, abstracts the gadget's usb peripheral controller * @req: used for control responses; buffer is pre-allocated * @os_desc_req: used for OS descriptors responses; buffer is pre-allocated diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 3dbb42c637c1..96281cd50ff6 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -734,10 +734,6 @@ static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb, /* random stuff */ -#define RUN_CONTEXT (in_irq() ? "in_irq" \ - : (in_interrupt() ? "in_interrupt" : "can sleep")) - - /* This rwsem is for use only by the hub driver and ehci-hcd. * Nobody else should touch it. */ diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h index 3a805e2ecbc9..bb9a782e1411 100644 --- a/include/linux/usb/pd.h +++ b/include/linux/usb/pd.h @@ -466,6 +466,7 @@ static inline unsigned int rdo_max_power(u32 rdo) #define PD_T_DRP_SRC 30 #define PD_T_PS_SOURCE_OFF 920 #define PD_T_PS_SOURCE_ON 480 +#define PD_T_PS_SOURCE_ON_PRS 450 /* 390 - 480ms */ #define PD_T_PS_HARD_RESET 30 #define PD_T_SRC_RECOVER 760 #define PD_T_SRC_RECOVER_MAX 1000 @@ -484,6 +485,7 @@ static inline unsigned int rdo_max_power(u32 rdo) #define PD_T_CC_DEBOUNCE 200 /* 100 - 200 ms */ #define PD_T_PD_DEBOUNCE 20 /* 10 - 20 ms */ +#define PD_T_TRY_CC_DEBOUNCE 15 /* 10 - 20 ms */ #define PD_N_CAPS_COUNT (PD_T_NO_RESPONSE / PD_T_SEND_SOURCE_CAP) #define PD_N_HARD_RESET_COUNT 2 diff --git a/include/linux/usb/pd_vdo.h b/include/linux/usb/pd_vdo.h index 68bdc4e2f5a9..8c08eeb9a74b 100644 --- a/include/linux/usb/pd_vdo.h +++ b/include/linux/usb/pd_vdo.h @@ -103,17 +103,25 @@ * -------------------- * <31> :: data capable as a USB host * <30> :: data capable as a USB device - * <29:27> :: product type + * <29:27> :: product type (UFP / Cable) * <26> :: modal operation supported (1b == yes) - * <25:16> :: Reserved, Shall be set to zero + * <25:16> :: product type (DFP) * <15:0> :: USB-IF assigned VID for this cable vendor */ #define IDH_PTYPE_UNDEF 0 #define IDH_PTYPE_HUB 1 #define IDH_PTYPE_PERIPH 2 +#define IDH_PTYPE_PSD 3 +#define IDH_PTYPE_AMA 5 + #define IDH_PTYPE_PCABLE 3 #define IDH_PTYPE_ACABLE 4 -#define IDH_PTYPE_AMA 5 + +#define IDH_PTYPE_DFP_UNDEF 0 +#define IDH_PTYPE_DFP_HUB 1 +#define IDH_PTYPE_DFP_HOST 2 +#define IDH_PTYPE_DFP_PB 3 +#define IDH_PTYPE_DFP_AMC 4 #define VDO_IDH(usbh, usbd, ptype, is_modal, vid) \ ((usbh) << 31 | (usbd) << 30 | ((ptype) & 0x7) << 27 \ @@ -122,6 +130,7 @@ #define PD_IDH_PTYPE(vdo) (((vdo) >> 27) & 0x7) #define PD_IDH_VID(vdo) ((vdo) & 0xffff) #define PD_IDH_MODAL_SUPP(vdo) ((vdo) & (1 << 26)) +#define PD_IDH_DFP_PTYPE(vdo) (((vdo) >> 23) & 0x7) /* * Cert Stat VDO @@ -177,7 +186,7 @@ * <31:28> :: Cable HW version * <27:24> :: Cable FW version * <23:20> :: Reserved, Shall be set to zero - * <19:18> :: type-C to Type-A/B/C (00b == A, 01 == B, 10 == C) + * <19:18> :: type-C to Type-A/B/C/Captive (00b == A, 01 == B, 10 == C, 11 == Captive) * <17> :: Type-C to Plug/Receptacle (0b == plug, 1b == receptacle) * <16:13> :: cable latency (0001 == <10ns(~1m length)) * <12:11> :: cable termination type (11b == both ends active VCONN req) @@ -193,6 +202,7 @@ #define CABLE_ATYPE 0 #define CABLE_BTYPE 1 #define CABLE_CTYPE 2 +#define CABLE_CAPTIVE 3 #define CABLE_PLUG 0 #define CABLE_RECEPTACLE 1 #define CABLE_CURR_1A5 0 @@ -208,6 +218,7 @@ | (tx1d) << 10 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 \ | ((cur) & 0x3) << 5 | (vps) << 4 | (sopp) << 3 \ | ((usbss) & 0x7)) +#define VDO_TYPEC_CABLE_TYPE(vdo) (((vdo) >> 18) & 0x3) /* * AMA VDO diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h index 09762d26fa0c..f4a18427f5c4 100644 --- a/include/linux/usb/tcpm.h +++ b/include/linux/usb/tcpm.h @@ -83,6 +83,27 @@ enum tcpm_transmit_type { * Optional; Called to enable/disable PD 3.0 fast role swap. * Enabling frs is accessory dependent as not all PD3.0 * accessories support fast role swap. + * @frs_sourcing_vbus: + * Optional; Called to notify that vbus is now being sourced. + * Low level drivers can perform chip specific operations, if any. + * @enable_auto_vbus_discharge: + * Optional; TCPCI spec based TCPC implementations can optionally + * support hardware to autonomously dischrge vbus upon disconnecting + * as sink or source. TCPM signals TCPC to enable the mechanism upon + * entering connected state and signals disabling upon disconnect. + * @set_auto_vbus_discharge_threshold: + * Mandatory when enable_auto_vbus_discharge is implemented. TCPM + * calls this function to allow lower levels drivers to program the + * vbus threshold voltage below which the vbus discharge circuit + * will be turned on. requested_vbus_voltage is set to 0 when vbus + * is going to disappear knowingly i.e. during PR_SWAP and + * HARD_RESET etc. + * @is_vbus_vsafe0v: + * Optional; TCPCI spec based TCPC implementations are expected to + * detect VSAFE0V voltage level at vbus. When detection of VSAFE0V + * is supported by TCPC, set this callback for TCPM to query + * whether vbus is at VSAFE0V when needed. + * Returns true when vbus is at VSAFE0V, false otherwise. */ struct tcpc_dev { struct fwnode_handle *fwnode; @@ -106,9 +127,14 @@ struct tcpc_dev { enum typec_cc_status cc); int (*try_role)(struct tcpc_dev *dev, int role); int (*pd_transmit)(struct tcpc_dev *dev, enum tcpm_transmit_type type, - const struct pd_message *msg); + const struct pd_message *msg, unsigned int negotiated_rev); int (*set_bist_data)(struct tcpc_dev *dev, bool on); int (*enable_frs)(struct tcpc_dev *dev, bool enable); + void (*frs_sourcing_vbus)(struct tcpc_dev *dev); + int (*enable_auto_vbus_discharge)(struct tcpc_dev *dev, bool enable); + int (*set_auto_vbus_discharge_threshold)(struct tcpc_dev *dev, enum typec_pwr_opmode mode, + bool pps_active, u32 requested_vbus_voltage); + bool (*is_vbus_vsafe0v)(struct tcpc_dev *dev); }; struct tcpm_port; diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h index 6be558045942..54475323f83b 100644 --- a/include/linux/usb/typec.h +++ b/include/linux/usb/typec.h @@ -126,9 +126,11 @@ struct typec_altmode_desc { enum typec_port_data roles; }; +int typec_partner_set_num_altmodes(struct typec_partner *partner, int num_altmodes); struct typec_altmode *typec_partner_register_altmode(struct typec_partner *partner, const struct typec_altmode_desc *desc); +int typec_plug_set_num_altmodes(struct typec_plug *plug, int num_altmodes); struct typec_altmode *typec_plug_register_altmode(struct typec_plug *plug, const struct typec_altmode_desc *desc); diff --git a/include/linux/usb/typec_tbt.h b/include/linux/usb/typec_tbt.h index 47c2d501ddce..63dd44b72e0c 100644 --- a/include/linux/usb/typec_tbt.h +++ b/include/linux/usb/typec_tbt.h @@ -39,12 +39,16 @@ struct typec_thunderbolt_data { #define TBT_CABLE_USB3_GEN1 1 #define TBT_CABLE_USB3_PASSIVE 2 #define TBT_CABLE_10_AND_20GBPS 3 -#define TBT_CABLE_ROUNDED BIT(19) +#define TBT_CABLE_ROUNDED_SUPPORT(_vdo_) \ + (((_vdo_) & GENMASK(20, 19)) >> 19) +#define TBT_GEN3_NON_ROUNDED 0 +#define TBT_GEN3_GEN4_ROUNDED_NON_ROUNDED 1 #define TBT_CABLE_OPTICAL BIT(21) #define TBT_CABLE_RETIMER BIT(22) #define TBT_CABLE_LINK_TRAINING BIT(23) #define TBT_SET_CABLE_SPEED(_s_) (((_s_) & GENMASK(2, 0)) << 16) +#define TBT_SET_CABLE_ROUNDED(_g_) (((_g_) & GENMASK(1, 0)) << 19) /* TBT3 Device Enter Mode VDO bits */ #define TBT_ENTER_MODE_CABLE_SPEED(s) TBT_SET_CABLE_SPEED(s) |