diff options
Diffstat (limited to 'include/linux/platform_data')
| -rw-r--r-- | include/linux/platform_data/dma-imx-sdma.h | 60 | ||||
| -rw-r--r-- | include/linux/platform_data/pata_ixp4xx_cf.h | 21 | ||||
| -rw-r--r-- | include/linux/platform_data/st_sensors_pdata.h | 3 | ||||
| -rw-r--r-- | include/linux/platform_data/ti-sysc.h | 1 |
4 files changed, 24 insertions, 61 deletions
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h deleted file mode 100644 index 725602d9df91..000000000000 --- a/include/linux/platform_data/dma-imx-sdma.h +++ /dev/null @@ -1,60 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __MACH_MXC_SDMA_H__ -#define __MACH_MXC_SDMA_H__ - -/** - * struct sdma_script_start_addrs - SDMA script start pointers - * - * start addresses of the different functions in the physical - * address space of the SDMA engine. - */ -struct sdma_script_start_addrs { - s32 ap_2_ap_addr; - s32 ap_2_bp_addr; - s32 ap_2_ap_fixed_addr; - s32 bp_2_ap_addr; - s32 loopback_on_dsp_side_addr; - s32 mcu_interrupt_only_addr; - s32 firi_2_per_addr; - s32 firi_2_mcu_addr; - s32 per_2_firi_addr; - s32 mcu_2_firi_addr; - s32 uart_2_per_addr; - s32 uart_2_mcu_addr; - s32 per_2_app_addr; - s32 mcu_2_app_addr; - s32 per_2_per_addr; - s32 uartsh_2_per_addr; - s32 uartsh_2_mcu_addr; - s32 per_2_shp_addr; - s32 mcu_2_shp_addr; - s32 ata_2_mcu_addr; - s32 mcu_2_ata_addr; - s32 app_2_per_addr; - s32 app_2_mcu_addr; - s32 shp_2_per_addr; - s32 shp_2_mcu_addr; - s32 mshc_2_mcu_addr; - s32 mcu_2_mshc_addr; - s32 spdif_2_mcu_addr; - s32 mcu_2_spdif_addr; - s32 asrc_2_mcu_addr; - s32 ext_mem_2_ipu_addr; - s32 descrambler_addr; - s32 dptc_dvfs_addr; - s32 utra_addr; - s32 ram_code_start_addr; - /* End of v1 array */ - s32 mcu_2_ssish_addr; - s32 ssish_2_mcu_addr; - s32 hdmi_dma_addr; - /* End of v2 array */ - s32 zcanfd_2_mcu_addr; - s32 zqspi_2_mcu_addr; - s32 mcu_2_ecspi_addr; - /* End of v3 array */ - s32 mcu_2_zqspi_addr; - /* End of v4 array */ -}; - -#endif /* __MACH_MXC_SDMA_H__ */ diff --git a/include/linux/platform_data/pata_ixp4xx_cf.h b/include/linux/platform_data/pata_ixp4xx_cf.h new file mode 100644 index 000000000000..601ba97fef57 --- /dev/null +++ b/include/linux/platform_data/pata_ixp4xx_cf.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __PLATFORM_DATA_PATA_IXP4XX_H +#define __PLATFORM_DATA_PATA_IXP4XX_H + +#include <linux/types.h> + +/* + * This structure provide a means for the board setup code + * to give information to th pata_ixp4xx driver. It is + * passed as platform_data. + */ +struct ixp4xx_pata_data { + volatile u32 *cs0_cfg; + volatile u32 *cs1_cfg; + unsigned long cs0_bits; + unsigned long cs1_bits; + void __iomem *cs0; + void __iomem *cs1; +}; + +#endif diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h index e40b28ca892e..897051e51b78 100644 --- a/include/linux/platform_data/st_sensors_pdata.h +++ b/include/linux/platform_data/st_sensors_pdata.h @@ -13,8 +13,9 @@ /** * struct st_sensors_platform_data - Platform data for the ST sensors * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2). - * Available only for accelerometer and pressure sensors. + * Available only for accelerometer, magnetometer and pressure sensors. * Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet). + * Magnetometer DRDY is supported only on LSM9DS0. * @open_drain: set the interrupt line to be open drain if possible. * @spi_3wire: enable spi-3wire mode. * @pullups: enable/disable i2c controller pullup resistors. diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index fafc1beea504..9837fb011f2f 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -50,6 +50,7 @@ struct sysc_regbits { s8 emufree_shift; }; +#define SYSC_QUIRK_REINIT_ON_RESUME BIT(27) #define SYSC_QUIRK_GPMC_DEBUG BIT(26) #define SYSC_MODULE_QUIRK_ENA_RESETDONE BIT(25) #define SYSC_MODULE_QUIRK_PRUSS BIT(24) |