diff options
Diffstat (limited to 'include/linux/platform_data')
| -rw-r--r-- | include/linux/platform_data/atmel.h | 4 | ||||
| -rw-r--r-- | include/linux/platform_data/dma-rcar-hpbdma.h | 103 | ||||
| -rw-r--r-- | include/linux/platform_data/edma.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/exynos_thermal.h | 119 | ||||
| -rw-r--r-- | include/linux/platform_data/leds-lp55xx.h | 10 | ||||
| -rw-r--r-- | include/linux/platform_data/leds-pca963x.h (renamed from include/linux/platform_data/leds-pca9633.h) | 25 | ||||
| -rw-r--r-- | include/linux/platform_data/mtd-nand-pxa3xx.h | 13 |
7 files changed, 135 insertions, 141 deletions
diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index 6a293b7fff3b..cea9f70133c5 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -71,6 +71,10 @@ struct atmel_nand_data { u8 on_flash_bbt; /* bbt on flash */ struct mtd_partition *parts; unsigned int num_parts; + bool has_dma; /* support dma transfer */ + + /* default is false, only for at32ap7000 chip is true */ + bool need_reset_workaround; }; /* Serial */ diff --git a/include/linux/platform_data/dma-rcar-hpbdma.h b/include/linux/platform_data/dma-rcar-hpbdma.h new file mode 100644 index 000000000000..648b8ea61a22 --- /dev/null +++ b/include/linux/platform_data/dma-rcar-hpbdma.h @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2011-2013 Renesas Electronics Corporation + * Copyright (C) 2013 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#ifndef __DMA_RCAR_HPBDMA_H +#define __DMA_RCAR_HPBDMA_H + +#include <linux/bitops.h> +#include <linux/types.h> + +/* Transmit sizes and respective register values */ +enum { + XMIT_SZ_8BIT = 0, + XMIT_SZ_16BIT = 1, + XMIT_SZ_32BIT = 2, + XMIT_SZ_MAX +}; + +/* DMA control register (DCR) bits */ +#define HPB_DMAE_DCR_DTAMD (1u << 26) +#define HPB_DMAE_DCR_DTAC (1u << 25) +#define HPB_DMAE_DCR_DTAU (1u << 24) +#define HPB_DMAE_DCR_DTAU1 (1u << 23) +#define HPB_DMAE_DCR_SWMD (1u << 22) +#define HPB_DMAE_DCR_BTMD (1u << 21) +#define HPB_DMAE_DCR_PKMD (1u << 20) +#define HPB_DMAE_DCR_CT (1u << 18) +#define HPB_DMAE_DCR_ACMD (1u << 17) +#define HPB_DMAE_DCR_DIP (1u << 16) +#define HPB_DMAE_DCR_SMDL (1u << 13) +#define HPB_DMAE_DCR_SPDAM (1u << 12) +#define HPB_DMAE_DCR_SDRMD_MASK (3u << 10) +#define HPB_DMAE_DCR_SDRMD_MOD (0u << 10) +#define HPB_DMAE_DCR_SDRMD_AUTO (1u << 10) +#define HPB_DMAE_DCR_SDRMD_TIMER (2u << 10) +#define HPB_DMAE_DCR_SPDS_MASK (3u << 8) +#define HPB_DMAE_DCR_SPDS_8BIT (0u << 8) +#define HPB_DMAE_DCR_SPDS_16BIT (1u << 8) +#define HPB_DMAE_DCR_SPDS_32BIT (2u << 8) +#define HPB_DMAE_DCR_DMDL (1u << 5) +#define HPB_DMAE_DCR_DPDAM (1u << 4) +#define HPB_DMAE_DCR_DDRMD_MASK (3u << 2) +#define HPB_DMAE_DCR_DDRMD_MOD (0u << 2) +#define HPB_DMAE_DCR_DDRMD_AUTO (1u << 2) +#define HPB_DMAE_DCR_DDRMD_TIMER (2u << 2) +#define HPB_DMAE_DCR_DPDS_MASK (3u << 0) +#define HPB_DMAE_DCR_DPDS_8BIT (0u << 0) +#define HPB_DMAE_DCR_DPDS_16BIT (1u << 0) +#define HPB_DMAE_DCR_DPDS_32BIT (2u << 0) + +/* Asynchronous reset register (ASYNCRSTR) bits */ +#define HPB_DMAE_ASYNCRSTR_ASRST41 BIT(10) +#define HPB_DMAE_ASYNCRSTR_ASRST40 BIT(9) +#define HPB_DMAE_ASYNCRSTR_ASRST39 BIT(8) +#define HPB_DMAE_ASYNCRSTR_ASRST27 BIT(7) +#define HPB_DMAE_ASYNCRSTR_ASRST26 BIT(6) +#define HPB_DMAE_ASYNCRSTR_ASRST25 BIT(5) +#define HPB_DMAE_ASYNCRSTR_ASRST24 BIT(4) +#define HPB_DMAE_ASYNCRSTR_ASRST23 BIT(3) +#define HPB_DMAE_ASYNCRSTR_ASRST22 BIT(2) +#define HPB_DMAE_ASYNCRSTR_ASRST21 BIT(1) +#define HPB_DMAE_ASYNCRSTR_ASRST20 BIT(0) + +struct hpb_dmae_slave_config { + unsigned int id; + dma_addr_t addr; + u32 dcr; + u32 port; + u32 rstr; + u32 mdr; + u32 mdm; + u32 flags; +#define HPB_DMAE_SET_ASYNC_RESET BIT(0) +#define HPB_DMAE_SET_ASYNC_MODE BIT(1) + u32 dma_ch; +}; + +#define HPB_DMAE_CHANNEL(_irq, _s_id) \ +{ \ + .ch_irq = _irq, \ + .s_id = _s_id, \ +} + +struct hpb_dmae_channel { + unsigned int ch_irq; + unsigned int s_id; +}; + +struct hpb_dmae_pdata { + const struct hpb_dmae_slave_config *slaves; + int num_slaves; + const struct hpb_dmae_channel *channels; + int num_channels; + const unsigned int ts_shift[XMIT_SZ_MAX]; + int num_hw_channels; +}; + +#endif diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h index 57300fd7cc03..179fb91bb5f2 100644 --- a/include/linux/platform_data/edma.h +++ b/include/linux/platform_data/edma.h @@ -180,4 +180,6 @@ struct edma_soc_info { const s16 (*xbar_chans)[2]; }; +int edma_trigger_channel(unsigned); + #endif diff --git a/include/linux/platform_data/exynos_thermal.h b/include/linux/platform_data/exynos_thermal.h deleted file mode 100644 index da7e6274b175..000000000000 --- a/include/linux/platform_data/exynos_thermal.h +++ /dev/null @@ -1,119 +0,0 @@ -/* - * exynos_thermal.h - Samsung EXYNOS TMU (Thermal Management Unit) - * - * Copyright (C) 2011 Samsung Electronics - * Donggeun Kim <[email protected]> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _LINUX_EXYNOS_THERMAL_H -#define _LINUX_EXYNOS_THERMAL_H -#include <linux/cpu_cooling.h> - -enum calibration_type { - TYPE_ONE_POINT_TRIMMING, - TYPE_TWO_POINT_TRIMMING, - TYPE_NONE, -}; - -enum soc_type { - SOC_ARCH_EXYNOS4210 = 1, - SOC_ARCH_EXYNOS, -}; -/** - * struct freq_clip_table - * @freq_clip_max: maximum frequency allowed for this cooling state. - * @temp_level: Temperature level at which the temperature clipping will - * happen. - * @mask_val: cpumask of the allowed cpu's where the clipping will take place. - * - * This structure is required to be filled and passed to the - * cpufreq_cooling_unregister function. - */ -struct freq_clip_table { - unsigned int freq_clip_max; - unsigned int temp_level; - const struct cpumask *mask_val; -}; - -/** - * struct exynos_tmu_platform_data - * @threshold: basic temperature for generating interrupt - * 25 <= threshold <= 125 [unit: degree Celsius] - * @threshold_falling: differntial value for setting threshold - * of temperature falling interrupt. - * @trigger_levels: array for each interrupt levels - * [unit: degree Celsius] - * 0: temperature for trigger_level0 interrupt - * condition for trigger_level0 interrupt: - * current temperature > threshold + trigger_levels[0] - * 1: temperature for trigger_level1 interrupt - * condition for trigger_level1 interrupt: - * current temperature > threshold + trigger_levels[1] - * 2: temperature for trigger_level2 interrupt - * condition for trigger_level2 interrupt: - * current temperature > threshold + trigger_levels[2] - * 3: temperature for trigger_level3 interrupt - * condition for trigger_level3 interrupt: - * current temperature > threshold + trigger_levels[3] - * @trigger_level0_en: - * 1 = enable trigger_level0 interrupt, - * 0 = disable trigger_level0 interrupt - * @trigger_level1_en: - * 1 = enable trigger_level1 interrupt, - * 0 = disable trigger_level1 interrupt - * @trigger_level2_en: - * 1 = enable trigger_level2 interrupt, - * 0 = disable trigger_level2 interrupt - * @trigger_level3_en: - * 1 = enable trigger_level3 interrupt, - * 0 = disable trigger_level3 interrupt - * @gain: gain of amplifier in the positive-TC generator block - * 0 <= gain <= 15 - * @reference_voltage: reference voltage of amplifier - * in the positive-TC generator block - * 0 <= reference_voltage <= 31 - * @noise_cancel_mode: noise cancellation mode - * 000, 100, 101, 110 and 111 can be different modes - * @type: determines the type of SOC - * @efuse_value: platform defined fuse value - * @cal_type: calibration type for temperature - * @freq_clip_table: Table representing frequency reduction percentage. - * @freq_tab_count: Count of the above table as frequency reduction may - * applicable to only some of the trigger levels. - * - * This structure is required for configuration of exynos_tmu driver. - */ -struct exynos_tmu_platform_data { - u8 threshold; - u8 threshold_falling; - u8 trigger_levels[4]; - bool trigger_level0_en; - bool trigger_level1_en; - bool trigger_level2_en; - bool trigger_level3_en; - - u8 gain; - u8 reference_voltage; - u8 noise_cancel_mode; - u32 efuse_value; - - enum calibration_type cal_type; - enum soc_type type; - struct freq_clip_table freq_tab[4]; - unsigned int freq_tab_count; -}; -#endif /* _LINUX_EXYNOS_THERMAL_H */ diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h index 202e290faea8..51a2ff579d60 100644 --- a/include/linux/platform_data/leds-lp55xx.h +++ b/include/linux/platform_data/leds-lp55xx.h @@ -36,6 +36,13 @@ struct lp55xx_predef_pattern { u8 size_b; }; +enum lp8501_pwr_sel { + LP8501_ALL_VDD, /* D1~9 are connected to VDD */ + LP8501_6VDD_3VOUT, /* D1~6 with VDD, D7~9 with VOUT */ + LP8501_3VDD_6VOUT, /* D1~6 with VOUT, D7~9 with VDD */ + LP8501_ALL_VOUT, /* D1~9 are connected to VOUT */ +}; + /* * struct lp55xx_platform_data * @led_config : Configurable led class device @@ -67,6 +74,9 @@ struct lp55xx_platform_data { /* Predefined pattern data */ struct lp55xx_predef_pattern *patterns; unsigned int num_patterns; + + /* LP8501 specific */ + enum lp8501_pwr_sel pwr_sel; }; #endif /* _LEDS_LP55XX_H */ diff --git a/include/linux/platform_data/leds-pca9633.h b/include/linux/platform_data/leds-pca963x.h index c5bf29b6fa7f..e731f0036329 100644 --- a/include/linux/platform_data/leds-pca9633.h +++ b/include/linux/platform_data/leds-pca963x.h @@ -1,7 +1,8 @@ /* - * PCA9633 LED chip driver. + * PCA963X LED chip driver. * * Copyright 2012 bct electronic GmbH + * Copyright 2013 Qtechnology A/S * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -18,18 +19,24 @@ * 02110-1301 USA */ -#ifndef __LINUX_PCA9633_H -#define __LINUX_PCA9633_H +#ifndef __LINUX_PCA963X_H +#define __LINUX_PCA963X_H #include <linux/leds.h> -enum pca9633_outdrv { - PCA9633_OPEN_DRAIN, - PCA9633_TOTEM_POLE, /* aka push-pull */ +enum pca963x_outdrv { + PCA963X_OPEN_DRAIN, + PCA963X_TOTEM_POLE, /* aka push-pull */ }; -struct pca9633_platform_data { +enum pca963x_blink_type { + PCA963X_SW_BLINK, + PCA963X_HW_BLINK, +}; + +struct pca963x_platform_data { struct led_platform_data leds; - enum pca9633_outdrv outdrv; + enum pca963x_outdrv outdrv; + enum pca963x_blink_type blink_type; }; -#endif /* __LINUX_PCA9633_H*/ +#endif /* __LINUX_PCA963X_H*/ diff --git a/include/linux/platform_data/mtd-nand-pxa3xx.h b/include/linux/platform_data/mtd-nand-pxa3xx.h index c42f39f20195..ffb801998e5d 100644 --- a/include/linux/platform_data/mtd-nand-pxa3xx.h +++ b/include/linux/platform_data/mtd-nand-pxa3xx.h @@ -16,19 +16,6 @@ struct pxa3xx_nand_timing { unsigned int tAR; /* ND_ALE low to ND_nRE low delay */ }; -struct pxa3xx_nand_cmdset { - uint16_t read1; - uint16_t read2; - uint16_t program; - uint16_t read_status; - uint16_t read_id; - uint16_t erase; - uint16_t reset; - uint16_t lock; - uint16_t unlock; - uint16_t lock_status; -}; - struct pxa3xx_nand_flash { char *name; uint32_t chip_id; |