5 files changed, 0 insertions, 104 deletions
diff --git a/include/linux/platform_data/i2c-nuc900.h b/include/linux/platform_data/i2c-nuc900.h
deleted file mode 100644
index 23036273a97e..000000000000
--- a/include/linux/platform_data/i2c-nuc900.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_NUC900_I2C_H
-#define __ASM_ARCH_NUC900_I2C_H
-
-struct nuc900_platform_i2c {
-	int		bus_num;
-	unsigned long   bus_freq;
-};
-
-#endif /* __ASM_ARCH_NUC900_I2C_H */
diff --git a/include/linux/platform_data/media/gpio-ir-recv.h b/include/linux/platform_data/media/gpio-ir-recv.h
deleted file mode 100644
index 0c298f569d5a..000000000000
--- a/include/linux/platform_data/media/gpio-ir-recv.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __GPIO_IR_RECV_H__
-#define __GPIO_IR_RECV_H__
-
-struct gpio_ir_recv_platform_data {
-	int		gpio_nr;
-	bool		active_low;
-	u64		allowed_protos;
-	const char	*map_name;
-};
-
-#endif /* __GPIO_IR_RECV_H__ */
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 17d57a18bac5..619df2431e75 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -63,24 +63,5 @@ struct gpmc_nand_regs {
 	void __iomem	*gpmc_bch_result4[GPMC_BCH_NUM_REMAINDER];
 	void __iomem	*gpmc_bch_result5[GPMC_BCH_NUM_REMAINDER];
 	void __iomem	*gpmc_bch_result6[GPMC_BCH_NUM_REMAINDER];
-	/* Deprecated. Do not use */
-	void __iomem	*gpmc_status;
-};
-
-struct omap_nand_platform_data {
-	int			cs;
-	struct mtd_partition	*parts;
-	int			nr_parts;
-	bool			flash_bbt;
-	enum nand_io		xfer_type;
-	int			devsize;
-	enum omap_ecc           ecc_opt;
-
-	struct device_node	*elm_of_node;
-
-	/* deprecated */
-	struct gpmc_nand_regs	reg;
-	struct device_node	*of_node;
-	bool			dev_ready;
 };
 #endif
diff --git a/include/linux/platform_data/sht15.h b/include/linux/platform_data/sht15.h
deleted file mode 100644
index 12289c1e9413..000000000000
--- a/include/linux/platform_data/sht15.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * sht15.h - support for the SHT15 Temperature and Humidity Sensor
- *
- * Copyright (c) 2009 Jonathan Cameron
- *
- * Copyright (c) 2007 Wouter Horre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * For further information, see the Documentation/hwmon/sht15 file.
- */
-
-#ifndef _PDATA_SHT15_H
-#define _PDATA_SHT15_H
-
-/**
- * struct sht15_platform_data - sht15 connectivity info
- * @gpio_data:		no. of gpio to which bidirectional data line is
- *			connected.
- * @gpio_sck:		no. of gpio to which the data clock is connected.
- * @supply_mv:		supply voltage in mv. Overridden by regulator if
- *			available.
- * @checksum:		flag to indicate the checksum should be validated.
- * @no_otp_reload:	flag to indicate no reload from OTP.
- * @low_resolution:	flag to indicate the temp/humidity resolution to use.
- */
-struct sht15_platform_data {
-	int gpio_data;
-	int gpio_sck;
-	int supply_mv;
-	bool checksum;
-	bool no_otp_reload;
-	bool low_resolution;
-};
-
-#endif /* _PDATA_SHT15_H */
diff --git a/include/linux/platform_data/st1232_pdata.h b/include/linux/platform_data/st1232_pdata.h
deleted file mode 100644
index 1dcd23bee24e..000000000000
--- a/include/linux/platform_data/st1232_pdata.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LINUX_ST1232_PDATA_H
-#define _LINUX_ST1232_PDATA_H
-
-/*
- * Optional platform data
- *
- * Use this if you want the driver to drive the reset pin.
- */
-struct st1232_pdata {
-	int reset_gpio;
-};
-
-#endif