4 files changed, 23 insertions, 77 deletions
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
deleted file mode 100644
index 725602d9df91..000000000000
--- a/include/linux/platform_data/dma-imx-sdma.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_MXC_SDMA_H__
-#define __MACH_MXC_SDMA_H__
-
-/**
- * struct sdma_script_start_addrs - SDMA script start pointers
- *
- * start addresses of the different functions in the physical
- * address space of the SDMA engine.
- */
-struct sdma_script_start_addrs {
-	s32 ap_2_ap_addr;
-	s32 ap_2_bp_addr;
-	s32 ap_2_ap_fixed_addr;
-	s32 bp_2_ap_addr;
-	s32 loopback_on_dsp_side_addr;
-	s32 mcu_interrupt_only_addr;
-	s32 firi_2_per_addr;
-	s32 firi_2_mcu_addr;
-	s32 per_2_firi_addr;
-	s32 mcu_2_firi_addr;
-	s32 uart_2_per_addr;
-	s32 uart_2_mcu_addr;
-	s32 per_2_app_addr;
-	s32 mcu_2_app_addr;
-	s32 per_2_per_addr;
-	s32 uartsh_2_per_addr;
-	s32 uartsh_2_mcu_addr;
-	s32 per_2_shp_addr;
-	s32 mcu_2_shp_addr;
-	s32 ata_2_mcu_addr;
-	s32 mcu_2_ata_addr;
-	s32 app_2_per_addr;
-	s32 app_2_mcu_addr;
-	s32 shp_2_per_addr;
-	s32 shp_2_mcu_addr;
-	s32 mshc_2_mcu_addr;
-	s32 mcu_2_mshc_addr;
-	s32 spdif_2_mcu_addr;
-	s32 mcu_2_spdif_addr;
-	s32 asrc_2_mcu_addr;
-	s32 ext_mem_2_ipu_addr;
-	s32 descrambler_addr;
-	s32 dptc_dvfs_addr;
-	s32 utra_addr;
-	s32 ram_code_start_addr;
-	/* End of v1 array */
-	s32 mcu_2_ssish_addr;
-	s32 ssish_2_mcu_addr;
-	s32 hdmi_dma_addr;
-	/* End of v2 array */
-	s32 zcanfd_2_mcu_addr;
-	s32 zqspi_2_mcu_addr;
-	s32 mcu_2_ecspi_addr;
-	/* End of v3 array */
-	s32 mcu_2_zqspi_addr;
-	/* End of v4 array */
-};
-
-#endif /* __MACH_MXC_SDMA_H__ */
diff --git a/include/linux/platform_data/pata_ixp4xx_cf.h b/include/linux/platform_data/pata_ixp4xx_cf.h
new file mode 100644
index 000000000000..601ba97fef57
--- /dev/null
+++ b/include/linux/platform_data/pata_ixp4xx_cf.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PLATFORM_DATA_PATA_IXP4XX_H
+#define __PLATFORM_DATA_PATA_IXP4XX_H
+
+#include <linux/types.h>
+
+/*
+ * This structure provide a means for the board setup code
+ * to give information to th pata_ixp4xx driver. It is
+ * passed as platform_data.
+ */
+struct ixp4xx_pata_data {
+	volatile u32	*cs0_cfg;
+	volatile u32	*cs1_cfg;
+	unsigned long	cs0_bits;
+	unsigned long	cs1_bits;
+	void __iomem	*cs0;
+	void __iomem	*cs1;
+};
+
+#endif
diff --git a/include/linux/platform_data/spi-ath79.h b/include/linux/platform_data/spi-ath79.h
deleted file mode 100644
index 81a388ff58cc..000000000000
--- a/include/linux/platform_data/spi-ath79.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Platform data definition for Atheros AR71XX/AR724X/AR913X SPI controller
- *
- *  Copyright (C) 2008-2010 Gabor Juhos <[email protected]>
- */
-
-#ifndef _ATH79_SPI_PLATFORM_H
-#define _ATH79_SPI_PLATFORM_H
-
-struct ath79_spi_platform_data {
-	unsigned	bus_num;
-	unsigned	num_chipselect;
-};
-
-#endif /* _ATH79_SPI_PLATFORM_H */
diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h
index e40b28ca892e..897051e51b78 100644
--- a/include/linux/platform_data/st_sensors_pdata.h
+++ b/include/linux/platform_data/st_sensors_pdata.h
@@ -13,8 +13,9 @@
 /**
  * struct st_sensors_platform_data - Platform data for the ST sensors
  * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2).
- *	Available only for accelerometer and pressure sensors.
+ *	Available only for accelerometer, magnetometer and pressure sensors.
  *	Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet).
+ *	Magnetometer DRDY is supported only on LSM9DS0.
  * @open_drain: set the interrupt line to be open drain if possible.
  * @spi_3wire: enable spi-3wire mode.
  * @pullups: enable/disable i2c controller pullup resistors.