diff options
Diffstat (limited to 'include/linux/platform_data')
| -rw-r--r-- | include/linux/platform_data/dwc3-omap.h | 47 | ||||
| -rw-r--r-- | include/linux/platform_data/exynos4_tmu.h | 83 | ||||
| -rw-r--r-- | include/linux/platform_data/leds-renesas-tpu.h | 14 | ||||
| -rw-r--r-- | include/linux/platform_data/mv_usb.h | 50 | ||||
| -rw-r--r-- | include/linux/platform_data/ntc_thermistor.h | 2 |
5 files changed, 195 insertions, 1 deletions
diff --git a/include/linux/platform_data/dwc3-omap.h b/include/linux/platform_data/dwc3-omap.h new file mode 100644 index 000000000000..ada401244e0b --- /dev/null +++ b/include/linux/platform_data/dwc3-omap.h @@ -0,0 +1,47 @@ +/** + * dwc3-omap.h - OMAP Specific Glue layer, header. + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Author: Felipe Balbi <balbi@ti.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +enum dwc3_omap_utmi_mode { + DWC3_OMAP_UTMI_MODE_UNKNOWN = 0, + DWC3_OMAP_UTMI_MODE_HW, + DWC3_OMAP_UTMI_MODE_SW, +}; + +struct dwc3_omap_data { + enum dwc3_omap_utmi_mode utmi_mode; +}; diff --git a/include/linux/platform_data/exynos4_tmu.h b/include/linux/platform_data/exynos4_tmu.h new file mode 100644 index 000000000000..39e038cca590 --- /dev/null +++ b/include/linux/platform_data/exynos4_tmu.h @@ -0,0 +1,83 @@ +/* + * exynos4_tmu.h - Samsung EXYNOS4 TMU (Thermal Management Unit) + * + * Copyright (C) 2011 Samsung Electronics + * Donggeun Kim <dg77.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _LINUX_EXYNOS4_TMU_H +#define _LINUX_EXYNOS4_TMU_H + +enum calibration_type { + TYPE_ONE_POINT_TRIMMING, + TYPE_TWO_POINT_TRIMMING, + TYPE_NONE, +}; + +/** + * struct exynos4_tmu_platform_data + * @threshold: basic temperature for generating interrupt + * 25 <= threshold <= 125 [unit: degree Celsius] + * @trigger_levels: array for each interrupt levels + * [unit: degree Celsius] + * 0: temperature for trigger_level0 interrupt + * condition for trigger_level0 interrupt: + * current temperature > threshold + trigger_levels[0] + * 1: temperature for trigger_level1 interrupt + * condition for trigger_level1 interrupt: + * current temperature > threshold + trigger_levels[1] + * 2: temperature for trigger_level2 interrupt + * condition for trigger_level2 interrupt: + * current temperature > threshold + trigger_levels[2] + * 3: temperature for trigger_level3 interrupt + * condition for trigger_level3 interrupt: + * current temperature > threshold + trigger_levels[3] + * @trigger_level0_en: + * 1 = enable trigger_level0 interrupt, + * 0 = disable trigger_level0 interrupt + * @trigger_level1_en: + * 1 = enable trigger_level1 interrupt, + * 0 = disable trigger_level1 interrupt + * @trigger_level2_en: + * 1 = enable trigger_level2 interrupt, + * 0 = disable trigger_level2 interrupt + * @trigger_level3_en: + * 1 = enable trigger_level3 interrupt, + * 0 = disable trigger_level3 interrupt + * @gain: gain of amplifier in the positive-TC generator block + * 0 <= gain <= 15 + * @reference_voltage: reference voltage of amplifier + * in the positive-TC generator block + * 0 <= reference_voltage <= 31 + * @cal_type: calibration type for temperature + * + * This structure is required for configuration of exynos4_tmu driver. + */ +struct exynos4_tmu_platform_data { + u8 threshold; + u8 trigger_levels[4]; + bool trigger_level0_en; + bool trigger_level1_en; + bool trigger_level2_en; + bool trigger_level3_en; + + u8 gain; + u8 reference_voltage; + + enum calibration_type cal_type; +}; +#endif /* _LINUX_EXYNOS4_TMU_H */ diff --git a/include/linux/platform_data/leds-renesas-tpu.h b/include/linux/platform_data/leds-renesas-tpu.h new file mode 100644 index 000000000000..055387086fc1 --- /dev/null +++ b/include/linux/platform_data/leds-renesas-tpu.h @@ -0,0 +1,14 @@ +#ifndef __LEDS_RENESAS_TPU_H__ +#define __LEDS_RENESAS_TPU_H__ + +struct led_renesas_tpu_config { + char *name; + unsigned pin_gpio_fn; + unsigned pin_gpio; + unsigned int channel_offset; + unsigned int timer_bit; + unsigned int max_brightness; + unsigned int refresh_rate; +}; + +#endif /* __LEDS_RENESAS_TPU_H__ */ diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h new file mode 100644 index 000000000000..e9d9149ddf38 --- /dev/null +++ b/include/linux/platform_data/mv_usb.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MV_PLATFORM_USB_H +#define __MV_PLATFORM_USB_H + +enum pxa_ehci_type { + EHCI_UNDEFINED = 0, + PXA_U2OEHCI, /* pxa 168, 9xx */ + PXA_SPH, /* pxa 168, 9xx SPH */ + MMP3_HSIC, /* mmp3 hsic */ + MMP3_FSIC, /* mmp3 fsic */ +}; + +enum { + MV_USB_MODE_OTG, + MV_USB_MODE_HOST, +}; + +enum { + VBUS_LOW = 0, + VBUS_HIGH = 1 << 0, +}; + +struct mv_usb_addon_irq { + unsigned int irq; + int (*poll)(void); +}; + +struct mv_usb_platform_data { + unsigned int clknum; + char **clkname; + struct mv_usb_addon_irq *id; /* Only valid for OTG. ID pin change*/ + struct mv_usb_addon_irq *vbus; /* valid for OTG/UDC. VBUS change*/ + + /* only valid for HCD. OTG or Host only*/ + unsigned int mode; + + int (*phy_init)(unsigned int regbase); + void (*phy_deinit)(unsigned int regbase); + int (*set_vbus)(unsigned int vbus); +}; + +#endif diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h index abd286215279..88734e871e3a 100644 --- a/include/linux/platform_data/ntc_thermistor.h +++ b/include/linux/platform_data/ntc_thermistor.h @@ -36,7 +36,7 @@ struct ntc_thermistor_platform_data { * read_uV() * * How to setup pullup_ohm, pulldown_ohm, and connect is - * described at Documentation/hwmon/ntc + * described at Documentation/hwmon/ntc_thermistor * * pullup/down_ohm: 0 for infinite / not-connected */ |