7 files changed, 35 insertions, 67 deletions

diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h
index 03b6095d3b18..d15d8ba8cc24 100644
--- a/include/linux/platform_data/dma-dw.h
+++ b/include/linux/platform_data/dma-dw.h
@@ -21,15 +21,15 @@
  * @dma_dev:	required DMA master device
  * @src_id:	src request line
  * @dst_id:	dst request line
- * @src_master: src master for transfers on allocated channel.
- * @dst_master: dest master for transfers on allocated channel.
+ * @m_master:	memory master for transfers on allocated channel
+ * @p_master:	peripheral master for transfers on allocated channel
  */
 struct dw_dma_slave {
 	struct device		*dma_dev;
 	u8			src_id;
 	u8			dst_id;
-	u8			src_master;
-	u8			dst_master;
+	u8			m_master;
+	u8			p_master;
 };
 
 /**
@@ -43,7 +43,7 @@ struct dw_dma_slave {
  * @block_size: Maximum block size supported by the controller
  * @nr_masters: Number of AHB masters supported by the controller
  * @data_width: Maximum data width supported by hardware per AHB master
- *		(0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
+ *		(in bytes, power of 2)
  */
 struct dw_dma_platform_data {
 	unsigned int	nr_channels;
@@ -55,7 +55,7 @@ struct dw_dma_platform_data {
 #define CHAN_PRIORITY_ASCENDING		0	/* chan0 highest */
 #define CHAN_PRIORITY_DESCENDING	1	/* chan7 highest */
 	unsigned char	chan_priority;
-	unsigned short	block_size;
+	unsigned int	block_size;
 	unsigned char	nr_masters;
 	unsigned char	data_width[DW_DMA_MAX_NR_MASTERS];
 };
diff --git a/include/linux/platform_data/gpio-dwapb.h b/include/linux/platform_data/gpio-dwapb.h
index 28702c849af1..2dc7f4a8ab09 100644
--- a/include/linux/platform_data/gpio-dwapb.h
+++ b/include/linux/platform_data/gpio-dwapb.h
@@ -15,8 +15,7 @@
 #define GPIO_DW_APB_H
 
 struct dwapb_port_property {
-	struct device_node *node;
-	const char	*name;
+	struct fwnode_handle *fwnode;
 	unsigned int	idx;
 	unsigned int	ngpio;
 	unsigned int	gpio_base;
diff --git a/include/linux/platform_data/invensense_mpu6050.h b/include/linux/platform_data/invensense_mpu6050.h
index ad3aa7b95f35..554b59801aa8 100644
--- a/include/linux/platform_data/invensense_mpu6050.h
+++ b/include/linux/platform_data/invensense_mpu6050.h
@@ -16,13 +16,16 @@
 
 /**
  * struct inv_mpu6050_platform_data - Platform data for the mpu driver
- * @orientation:	Orientation matrix of the chip
+ * @orientation:	Orientation matrix of the chip (deprecated in favor of
+ *			mounting matrix retrieved from device-tree)
  *
  * Contains platform specific information on how to configure the MPU6050 to
  * work on this platform.  The orientation matricies are 3x3 rotation matricies
  * that are applied to the data to rotate from the mounting orientation to the
  * platform orientation.  The values must be one of 0, 1, or -1 and each row and
  * column should have exactly 1 non-zero value.
+ *
+ * Deprecated in favor of mounting matrix retrieved from device-tree.
  */
 struct inv_mpu6050_platform_data {
 	__s8 orientation[9];
diff --git a/include/linux/platform_data/mailbox-omap.h b/include/linux/platform_data/mailbox-omap.h
deleted file mode 100644
index 4631dbb4255e..000000000000
--- a/include/linux/platform_data/mailbox-omap.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * mailbox-omap.h
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _PLAT_MAILBOX_H
-#define _PLAT_MAILBOX_H
-
-/* Interrupt register configuration types */
-#define MBOX_INTR_CFG_TYPE1	(0)
-#define MBOX_INTR_CFG_TYPE2	(1)
-
-/**
- * struct omap_mbox_dev_info - OMAP mailbox device attribute info
- * @name:	name of the mailbox device
- * @tx_id:	mailbox queue id used for transmitting messages
- * @rx_id:	mailbox queue id on which messages are received
- * @irq_id:	irq identifier number to use from the hwmod data
- * @usr_id:	mailbox user id for identifying the interrupt into
- *			the MPU interrupt controller.
- */
-struct omap_mbox_dev_info {
-	const char *name;
-	u32 tx_id;
-	u32 rx_id;
-	u32 irq_id;
-	u32 usr_id;
-};
-
-/**
- * struct omap_mbox_pdata - OMAP mailbox platform data
- * @intr_type:	type of interrupt configuration registers used
-			while programming mailbox queue interrupts
- * @num_users:	number of users (processor devices) that the mailbox
- *			h/w block can interrupt
- * @num_fifos:	number of h/w fifos within the mailbox h/w block
- * @info_cnt:	number of mailbox devices for the platform
- * @info:	array of mailbox device attributes
- */
-struct omap_mbox_pdata {
-	u32 intr_type;
-	u32 num_users;
-	u32 num_fifos;
-	u32 info_cnt;
-	struct omap_mbox_dev_info *info;
-};
-
-#endif /* _PLAT_MAILBOX_H */
diff --git a/include/linux/platform_data/media/ir-rx51.h b/include/linux/platform_data/media/ir-rx51.h
index 104aa892f31b..3038120ca46e 100644
--- a/include/linux/platform_data/media/ir-rx51.h
+++ b/include/linux/platform_data/media/ir-rx51.h
@@ -5,6 +5,7 @@ struct lirc_rx51_platform_data {
 	int pwm_timer;
 
 	int(*set_max_mpu_wakeup_lat)(struct device *dev, long t);
+	struct pwm_omap_dmtimer_pdata *dmtimer;
 };
 
 #endif
diff --git a/include/linux/platform_data/pwm_omap_dmtimer.h b/include/linux/platform_data/pwm_omap_dmtimer.h
index 59384217208f..e7d521e48855 100644
--- a/include/linux/platform_data/pwm_omap_dmtimer.h
+++ b/include/linux/platform_data/pwm_omap_dmtimer.h
@@ -35,6 +35,16 @@
 #ifndef __PWM_OMAP_DMTIMER_PDATA_H
 #define __PWM_OMAP_DMTIMER_PDATA_H
 
+/* clock sources */
+#define PWM_OMAP_DMTIMER_SRC_SYS_CLK			0x00
+#define PWM_OMAP_DMTIMER_SRC_32_KHZ			0x01
+#define PWM_OMAP_DMTIMER_SRC_EXT_CLK			0x02
+
+/* timer interrupt enable bits */
+#define PWM_OMAP_DMTIMER_INT_CAPTURE			(1 << 2)
+#define PWM_OMAP_DMTIMER_INT_OVERFLOW			(1 << 1)
+#define PWM_OMAP_DMTIMER_INT_MATCH			(1 << 0)
+
 /* trigger types */
 #define PWM_OMAP_DMTIMER_TRIGGER_NONE			0x00
 #define PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW		0x01
@@ -45,15 +55,23 @@ typedef struct omap_dm_timer pwm_omap_dmtimer;
 
 struct pwm_omap_dmtimer_pdata {
 	pwm_omap_dmtimer *(*request_by_node)(struct device_node *np);
+	pwm_omap_dmtimer *(*request_specific)(int timer_id);
+	pwm_omap_dmtimer *(*request)(void);
+
 	int	(*free)(pwm_omap_dmtimer *timer);
 
 	void	(*enable)(pwm_omap_dmtimer *timer);
 	void	(*disable)(pwm_omap_dmtimer *timer);
 
+	int	(*get_irq)(pwm_omap_dmtimer *timer);
+	int	(*set_int_enable)(pwm_omap_dmtimer *timer, unsigned int value);
+	int	(*set_int_disable)(pwm_omap_dmtimer *timer, u32 mask);
+
 	struct clk *(*get_fclk)(pwm_omap_dmtimer *timer);
 
 	int	(*start)(pwm_omap_dmtimer *timer);
 	int	(*stop)(pwm_omap_dmtimer *timer);
+	int	(*set_source)(pwm_omap_dmtimer *timer, int source);
 
 	int	(*set_load)(pwm_omap_dmtimer *timer, int autoreload,
 			unsigned int value);
@@ -63,7 +81,10 @@ struct pwm_omap_dmtimer_pdata {
 			int toggle, int trigger);
 	int	(*set_prescaler)(pwm_omap_dmtimer *timer, int prescaler);
 
+	unsigned int (*read_counter)(pwm_omap_dmtimer *timer);
 	int	(*write_counter)(pwm_omap_dmtimer *timer, unsigned int value);
+	unsigned int (*read_status)(pwm_omap_dmtimer *timer);
+	int	(*write_status)(pwm_omap_dmtimer *timer, unsigned int value);
 };
 
 #endif /* __PWM_OMAP_DMTIMER_PDATA_H */
diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h
index 753839187ba0..79b0e4cdb814 100644
--- a/include/linux/platform_data/st_sensors_pdata.h
+++ b/include/linux/platform_data/st_sensors_pdata.h
@@ -16,9 +16,11 @@
  * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2).
  *	Available only for accelerometer and pressure sensors.
  *	Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet).
+ * @open_drain: set the interrupt line to be open drain if possible.
  */
 struct st_sensors_platform_data {
 	u8 drdy_int_pin;
+	bool open_drain;
 };
 
 #endif /* ST_SENSORS_PDATA_H */