diff options
Diffstat (limited to 'include/linux/phy.h')
| -rw-r--r-- | include/linux/phy.h | 82 |
1 files changed, 74 insertions, 8 deletions
diff --git a/include/linux/phy.h b/include/linux/phy.h index e25f1830fbcf..772476028a65 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -81,10 +81,28 @@ typedef enum { PHY_INTERFACE_MODE_MOCA, PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TRGMII, + PHY_INTERFACE_MODE_1000BASEX, + PHY_INTERFACE_MODE_2500BASEX, + PHY_INTERFACE_MODE_RXAUI, PHY_INTERFACE_MODE_MAX, } phy_interface_t; /** + * phy_supported_speeds - return all speeds currently supported by a phy device + * @phy: The phy device to return supported speeds of. + * @speeds: buffer to store supported speeds in. + * @size: size of speeds buffer. + * + * Description: Returns the number of supported speeds, and + * fills the speeds * buffer with the supported speeds. If speeds buffer is + * too small to contain * all currently supported speeds, will return as + * many speeds as can fit. + */ +unsigned int phy_supported_speeds(struct phy_device *phy, + unsigned int *speeds, + unsigned int size); + +/** * It maps 'enum phy_interface_t' found in include/linux/phy.h * into the device tree binding of 'phy-mode', so that Ethernet * device driver can get phy interface from device tree. @@ -126,6 +144,12 @@ static inline const char *phy_modes(phy_interface_t interface) return "qsgmii"; case PHY_INTERFACE_MODE_TRGMII: return "trgmii"; + case PHY_INTERFACE_MODE_1000BASEX: + return "1000base-x"; + case PHY_INTERFACE_MODE_2500BASEX: + return "2500base-x"; + case PHY_INTERFACE_MODE_RXAUI: + return "rxaui"; default: return "unknown"; } @@ -142,11 +166,7 @@ static inline const char *phy_modes(phy_interface_t interface) /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ #define PHY_ID_FMT "%s:%02x" -/* - * Need to be a little smaller than phydev->dev.bus_id to leave room - * for the ":%02x" - */ -#define MII_BUS_ID_SIZE (20 - 3) +#define MII_BUS_ID_SIZE 61 /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */ @@ -343,7 +363,7 @@ struct phy_c45_device_ids { * giving up on the current attempt at acquiring a link * irq: IRQ number of the PHY's interrupt (-1 if none) * phy_timer: The timer for handling the state machine - * phy_queue: A work_queue for the interrupt + * phy_queue: A work_queue for the phy_mac_interrupt * attached_dev: The attached enet driver's device instance ptr * adjust_link: Callback for the enet controller to respond to * changes in the link state. @@ -401,10 +421,19 @@ struct phy_device { u32 advertising; u32 lp_advertising; + /* Energy efficient ethernet modes which should be prohibited */ + u32 eee_broken_modes; + int autoneg; int link_timeout; +#ifdef CONFIG_LED_TRIGGER_PHY + struct phy_led_trigger *phy_led_triggers; + unsigned int phy_num_led_triggers; + struct phy_led_trigger *last_triggered; +#endif + /* * Interrupt number for this PHY * -1 means no interrupt @@ -425,6 +454,7 @@ struct phy_device { struct net_device *attached_dev; u8 mdix; + u8 mdix_ctrl; void (*adjust_link)(struct net_device *dev); }; @@ -589,6 +619,13 @@ struct phy_driver { void (*get_strings)(struct phy_device *dev, u8 *data); void (*get_stats)(struct phy_device *dev, struct ethtool_stats *stats, u64 *data); + + /* Get and Set PHY tunables */ + int (*get_tunable)(struct phy_device *dev, + struct ethtool_tunable *tuna, void *data); + int (*set_tunable)(struct phy_device *dev, + struct ethtool_tunable *tuna, + const void *data); }; #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ struct phy_driver, mdiodrv) @@ -599,7 +636,7 @@ struct phy_driver { /* A Structure for boards to register fixups with the PHY Lib */ struct phy_fixup { struct list_head list; - char bus_id[20]; + char bus_id[MII_BUS_ID_SIZE + 3]; u32 phy_uid; u32 phy_uid_mask; int (*run)(struct phy_device *phydev); @@ -764,11 +801,15 @@ void phy_detach(struct phy_device *phydev); void phy_start(struct phy_device *phydev); void phy_stop(struct phy_device *phydev); int phy_start_aneg(struct phy_device *phydev); +int phy_aneg_done(struct phy_device *phydev); int phy_stop_interrupts(struct phy_device *phydev); static inline int phy_read_status(struct phy_device *phydev) { + if (!phydev->drv) + return -EIO; + return phydev->drv->read_status(phydev); } @@ -802,7 +843,8 @@ int phy_driver_register(struct phy_driver *new_driver, struct module *owner); int phy_drivers_register(struct phy_driver *new_driver, int n, struct module *owner); void phy_state_machine(struct work_struct *work); -void phy_change(struct work_struct *work); +void phy_change(struct phy_device *phydev); +void phy_change_work(struct work_struct *work); void phy_mac_interrupt(struct phy_device *phydev, int new_link); void phy_start_machine(struct phy_device *phydev); void phy_stop_machine(struct phy_device *phydev); @@ -825,6 +867,10 @@ int phy_register_fixup_for_id(const char *bus_id, int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, int (*run)(struct phy_device *)); +int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask); +int phy_unregister_fixup_for_id(const char *bus_id); +int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask); + int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable); int phy_get_eee_err(struct phy_device *phydev); int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data); @@ -836,12 +882,32 @@ int phy_ethtool_get_link_ksettings(struct net_device *ndev, struct ethtool_link_ksettings *cmd); int phy_ethtool_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd); +int phy_ethtool_nway_reset(struct net_device *ndev); int __init mdio_bus_init(void); void mdio_bus_exit(void); extern struct bus_type mdio_bus_type; +struct mdio_board_info { + const char *bus_id; + char modalias[MDIO_NAME_SIZE]; + int mdio_addr; + const void *platform_data; +}; + +#if IS_ENABLED(CONFIG_PHYLIB) +int mdiobus_register_board_info(const struct mdio_board_info *info, + unsigned int n); +#else +static inline int mdiobus_register_board_info(const struct mdio_board_info *i, + unsigned int n) +{ + return 0; +} +#endif + + /** * module_phy_driver() - Helper macro for registering PHY drivers * @__phy_drivers: array of PHY drivers to register |