diff options
Diffstat (limited to 'include/linux/mtd/nand.h')
| -rw-r--r-- | include/linux/mtd/nand.h | 39 |
1 files changed, 38 insertions, 1 deletions
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index d8905a229f34..9591e0fbe5bd 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -142,6 +142,12 @@ enum nand_ecc_algo { */ #define NAND_ECC_GENERIC_ERASED_CHECK BIT(0) #define NAND_ECC_MAXIMIZE BIT(1) +/* + * If your controller already sends the required NAND commands when + * reading or writing a page, then the framework is not supposed to + * send READ0 and SEQIN/PAGEPROG respectively. + */ +#define NAND_ECC_CUSTOM_PAGE_ACCESS BIT(2) /* Bit mask for flags passed to do_nand_read_ecc */ #define NAND_GET_DEVICE 0x80 @@ -186,6 +192,7 @@ enum nand_ecc_algo { /* Macros to identify the above */ #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) #define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ)) +#define NAND_HAS_SUBPAGE_WRITE(chip) !((chip)->options & NAND_NO_SUBPAGE_WRITE) /* Non chip related options */ /* This option skips the bbt scan during initialization. */ @@ -210,6 +217,16 @@ enum nand_ecc_algo { */ #define NAND_USE_BOUNCE_BUFFER 0x00100000 +/* + * In case your controller is implementing ->cmd_ctrl() and is relying on the + * default ->cmdfunc() implementation, you may want to let the core handle the + * tCCS delay which is required when a column change (RNDIN or RNDOUT) is + * requested. + * If your controller already takes care of this delay, you don't need to set + * this flag. + */ +#define NAND_WAIT_TCCS 0x00200000 + /* Options set by nand scan */ /* Nand scan has allocated controller struct */ #define NAND_CONTROLLER_ALLOC 0x80000000 @@ -558,6 +575,11 @@ struct nand_ecc_ctrl { int page); }; +static inline int nand_standard_page_accessors(struct nand_ecc_ctrl *ecc) +{ + return !(ecc->options & NAND_ECC_CUSTOM_PAGE_ACCESS); +} + /** * struct nand_buffers - buffer structure for read/write * @ecccalc: buffer pointer for calculated ECC, size is oobsize. @@ -584,12 +606,16 @@ struct nand_buffers { * * All these timings are expressed in picoseconds. * + * @tBERS_max: Block erase time + * @tCCS_min: Change column setup time + * @tPROG_max: Page program time + * @tR_max: Page read time * @tALH_min: ALE hold time * @tADL_min: ALE to data loading time * @tALS_min: ALE setup time * @tAR_min: ALE to RE# delay * @tCEA_max: CE# access time - * @tCEH_min: + * @tCEH_min: CE# high hold time * @tCH_min: CE# hold time * @tCHZ_max: CE# high to output hi-Z * @tCLH_min: CLE hold time @@ -621,6 +647,10 @@ struct nand_buffers { * @tWW_min: WP# transition to WE# low */ struct nand_sdr_timings { + u32 tBERS_max; + u32 tCCS_min; + u32 tPROG_max; + u32 tR_max; u32 tALH_min; u32 tADL_min; u32 tALS_min; @@ -771,6 +801,10 @@ nand_get_sdr_timings(const struct nand_data_interface *conf) * supported, 0 otherwise. * @jedec_params: [INTERN] holds the JEDEC parameter page when JEDEC is * supported, 0 otherwise. + * @max_bb_per_die: [INTERN] the max number of bad blocks each die of a + * this nand device will encounter their life times. + * @blocks_per_die: [INTERN] The number of PEBs in a die + * @data_interface: [INTERN] NAND interface timing information * @read_retries: [INTERN] the number of read retry modes supported * @onfi_set_features: [REPLACEABLE] set the features for ONFI nand * @onfi_get_features: [REPLACEABLE] get the features for ONFI nand @@ -853,6 +887,8 @@ struct nand_chip { struct nand_onfi_params onfi_params; struct nand_jedec_params jedec_params; }; + u16 max_bb_per_die; + u32 blocks_per_die; struct nand_data_interface *data_interface; @@ -928,6 +964,7 @@ static inline void nand_set_controller_data(struct nand_chip *chip, void *priv) #define NAND_MFR_SANDISK 0x45 #define NAND_MFR_INTEL 0x89 #define NAND_MFR_ATO 0x9b +#define NAND_MFR_WINBOND 0xef /* The maximum expected count of bytes in the NAND ID sequence */ #define NAND_MAX_ID_LEN 8 |