diff options
Diffstat (limited to 'include/linux/mmc')
| -rw-r--r-- | include/linux/mmc/card.h | 36 | ||||
| -rw-r--r-- | include/linux/mmc/dw_mmc.h | 21 | ||||
| -rw-r--r-- | include/linux/mmc/host.h | 49 | ||||
| -rw-r--r-- | include/linux/mmc/mmc.h | 3 | ||||
| -rw-r--r-- | include/linux/mmc/sdio_ids.h | 1 | ||||
| -rw-r--r-- | include/linux/mmc/sh_mobile_sdhi.h | 10 | ||||
| -rw-r--r-- | include/linux/mmc/tmio.h | 71 |
7 files changed, 84 insertions, 107 deletions
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index eb0151bac50c..d8673ca968ba 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -95,6 +95,7 @@ struct mmc_ext_csd { u8 raw_partition_support; /* 160 */ u8 raw_rpmb_size_mult; /* 168 */ u8 raw_erased_mem_count; /* 181 */ + u8 strobe_support; /* 184 */ u8 raw_ext_csd_structure; /* 194 */ u8 raw_card_type; /* 196 */ u8 raw_driver_strength; /* 197 */ @@ -279,6 +280,7 @@ struct mmc_card { #define MMC_QUIRK_SEC_ERASE_TRIM_BROKEN (1<<10) /* Skip secure for erase/trim */ #define MMC_QUIRK_BROKEN_IRQ_POLLING (1<<11) /* Polling SDIO_CCCR_INTx could create a fake interrupt */ #define MMC_QUIRK_TRIM_BROKEN (1<<12) /* Skip trim */ +#define MMC_QUIRK_BROKEN_HPI (1<<13) /* Disable broken HPI support */ unsigned int erase_size; /* erase size in sectors */ @@ -353,6 +355,9 @@ struct mmc_fixup { /* SDIO-specfic fields. You can use SDIO_ANY_ID here of course */ u16 cis_vendor, cis_device; + /* for MMC cards */ + unsigned int ext_csd_rev; + void (*vendor_fixup)(struct mmc_card *card, int data); int data; }; @@ -361,11 +366,20 @@ struct mmc_fixup { #define CID_OEMID_ANY ((unsigned short) -1) #define CID_NAME_ANY (NULL) +#define EXT_CSD_REV_ANY (-1u) + +#define CID_MANFID_SANDISK 0x2 +#define CID_MANFID_TOSHIBA 0x11 +#define CID_MANFID_MICRON 0x13 +#define CID_MANFID_SAMSUNG 0x15 +#define CID_MANFID_KINGSTON 0x70 +#define CID_MANFID_HYNIX 0x90 + #define END_FIXUP { NULL } #define _FIXUP_EXT(_name, _manfid, _oemid, _rev_start, _rev_end, \ _cis_vendor, _cis_device, \ - _fixup, _data) \ + _fixup, _data, _ext_csd_rev) \ { \ .name = (_name), \ .manfid = (_manfid), \ @@ -376,23 +390,30 @@ struct mmc_fixup { .cis_device = (_cis_device), \ .vendor_fixup = (_fixup), \ .data = (_data), \ + .ext_csd_rev = (_ext_csd_rev), \ } #define MMC_FIXUP_REV(_name, _manfid, _oemid, _rev_start, _rev_end, \ - _fixup, _data) \ + _fixup, _data, _ext_csd_rev) \ _FIXUP_EXT(_name, _manfid, \ _oemid, _rev_start, _rev_end, \ SDIO_ANY_ID, SDIO_ANY_ID, \ - _fixup, _data) \ + _fixup, _data, _ext_csd_rev) \ #define MMC_FIXUP(_name, _manfid, _oemid, _fixup, _data) \ - MMC_FIXUP_REV(_name, _manfid, _oemid, 0, -1ull, _fixup, _data) + MMC_FIXUP_REV(_name, _manfid, _oemid, 0, -1ull, _fixup, _data, \ + EXT_CSD_REV_ANY) + +#define MMC_FIXUP_EXT_CSD_REV(_name, _manfid, _oemid, _fixup, _data, \ + _ext_csd_rev) \ + MMC_FIXUP_REV(_name, _manfid, _oemid, 0, -1ull, _fixup, _data, \ + _ext_csd_rev) #define SDIO_FIXUP(_vendor, _device, _fixup, _data) \ _FIXUP_EXT(CID_NAME_ANY, CID_MANFID_ANY, \ CID_OEMID_ANY, 0, -1ull, \ _vendor, _device, \ - _fixup, _data) \ + _fixup, _data, EXT_CSD_REV_ANY) \ #define cid_rev(hwrev, fwrev, year, month) \ (((u64) hwrev) << 40 | \ @@ -511,6 +532,11 @@ static inline int mmc_card_broken_irq_polling(const struct mmc_card *c) return c->quirks & MMC_QUIRK_BROKEN_IRQ_POLLING; } +static inline int mmc_card_broken_hpi(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_BROKEN_HPI; +} + #define mmc_card_name(c) ((c)->cid.prod_name) #define mmc_card_id(c) (dev_name(&(c)->dev)) diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index 7b41c6db1bb6..83b0edfce471 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -36,7 +36,6 @@ enum { EVENT_XFER_COMPLETE, EVENT_DATA_COMPLETE, EVENT_DATA_ERROR, - EVENT_XFER_ERROR }; struct mmc_data; @@ -55,6 +54,7 @@ struct dw_mci_dma_slave { /** * struct dw_mci - MMC controller state shared between all slots * @lock: Spinlock protecting the queue and associated data. + * @irq_lock: Spinlock protecting the INTMASK setting. * @regs: Pointer to MMIO registers. * @fifo_reg: Pointer to MMIO registers for data FIFO * @sg: Scatterlist entry currently being processed by PIO code, if any. @@ -65,6 +65,9 @@ struct dw_mci_dma_slave { * @cmd: The command currently being sent to the card, or NULL. * @data: The data currently being transferred, or NULL if no data * transfer is in progress. + * @stop_abort: The command currently prepared for stoping transfer. + * @prev_blksz: The former transfer blksz record. + * @timing: Record of current ios timing. * @use_dma: Whether DMA channel is initialized or not. * @using_dma: Whether DMA is in use for the current transfer. * @dma_64bit_address: Whether DMA supports 64-bit address mode or not. @@ -72,7 +75,10 @@ struct dw_mci_dma_slave { * @sg_cpu: Virtual address of DMA buffer. * @dma_ops: Pointer to platform-specific DMA callbacks. * @cmd_status: Snapshot of SR taken upon completion of the current + * @ring_size: Buffer size for idma descriptors. * command. Only valid when EVENT_CMD_COMPLETE is pending. + * @dms: structure of slave-dma private data. + * @phy_regs: physical address of controller's register map * @data_status: Snapshot of SR taken upon completion of the current * data transfer. Only valid when EVENT_DATA_COMPLETE or * EVENT_DATA_ERROR is pending. @@ -80,7 +86,6 @@ struct dw_mci_dma_slave { * to be sent. * @dir_status: Direction of current transfer. * @tasklet: Tasklet running the request state machine. - * @card_tasklet: Tasklet handling card detect. * @pending_events: Bitmask of events flagged by the interrupt handler * to be processed by the tasklet. * @completed_events: Bitmask of events which the state machine has @@ -91,6 +96,7 @@ struct dw_mci_dma_slave { * rate and timeout calculations. * @current_speed: Configured rate of the controller. * @num_slots: Number of slots available. + * @fifoth_val: The value of FIFOTH register. * @verid: Denote Version ID. * @dev: Device associated with the MMC controller. * @pdata: Platform data associated with the MMC controller. @@ -106,10 +112,11 @@ struct dw_mci_dma_slave { * @part_buf: Simple buffer for partial fifo reads/writes. * @push_data: Pointer to FIFO push function. * @pull_data: Pointer to FIFO pull function. - * @quirks: Set of quirks that apply to specific versions of the IP. + * @vqmmc_enabled: Status of vqmmc, should be true or false. * @irq_flags: The flags to be passed to request_irq. * @irq: The irq value to be passed to request_irq. * @sdio_id0: Number of slot0 in the SDIO interrupt registers. + * @cmd11_timer: Timer for SD3.0 voltage switch over scheme. * @dto_timer: Timer for broken data transfer over scheme. * * Locking @@ -210,9 +217,6 @@ struct dw_mci { void (*push_data)(struct dw_mci *host, void *buf, int cnt); void (*pull_data)(struct dw_mci *host, void *buf, int cnt); - /* Workaround flags */ - u32 quirks; - bool vqmmc_enabled; unsigned long irq_flags; /* IRQ flags */ int irq; @@ -234,17 +238,12 @@ struct dw_mci_dma_ops { void (*exit)(struct dw_mci *host); }; -/* IP Quirks/flags. */ -/* Timer for broken data transfer over scheme */ -#define DW_MCI_QUIRK_BROKEN_DTO BIT(0) - struct dma_pdata; /* Board platform data */ struct dw_mci_board { u32 num_slots; - u32 quirks; /* Workaround / Quirk flags */ unsigned int bus_hz; /* Clock speed at the cclk_in pad */ u32 caps; /* Capabilities */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 8dd4d290ab0d..aa4bfbf129e4 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -19,6 +19,7 @@ #include <linux/mmc/core.h> #include <linux/mmc/card.h> +#include <linux/mmc/mmc.h> #include <linux/mmc/pm.h> struct mmc_ios { @@ -77,6 +78,8 @@ struct mmc_ios { #define MMC_SET_DRIVER_TYPE_A 1 #define MMC_SET_DRIVER_TYPE_C 2 #define MMC_SET_DRIVER_TYPE_D 3 + + bool enhanced_strobe; /* hs400es selection */ }; struct mmc_host_ops { @@ -93,28 +96,39 @@ struct mmc_host_ops { void (*pre_req)(struct mmc_host *host, struct mmc_request *req, bool is_first_req); void (*request)(struct mmc_host *host, struct mmc_request *req); + + /* + * Avoid calling the next three functions too often or in a "fast + * path", since underlaying controller might implement them in an + * expensive and/or slow way. Also note that these functions might + * sleep, so don't call them in the atomic contexts! + */ + + /* + * Notes to the set_ios callback: + * ios->clock might be 0. For some controllers, setting 0Hz + * as any other frequency works. However, some controllers + * explicitly need to disable the clock. Otherwise e.g. voltage + * switching might fail because the SDCLK is not really quiet. + */ + void (*set_ios)(struct mmc_host *host, struct mmc_ios *ios); + /* - * Avoid calling these three functions too often or in a "fast path", - * since underlaying controller might implement them in an expensive - * and/or slow way. - * - * Also note that these functions might sleep, so don't call them - * in the atomic contexts! - * * Return values for the get_ro callback should be: * 0 for a read/write card * 1 for a read-only card * -ENOSYS when not supported (equal to NULL callback) * or a negative errno value when something bad happened - * + */ + int (*get_ro)(struct mmc_host *host); + + /* * Return values for the get_cd callback should be: * 0 for a absent card * 1 for a present card * -ENOSYS when not supported (equal to NULL callback) * or a negative errno value when something bad happened */ - void (*set_ios)(struct mmc_host *host, struct mmc_ios *ios); - int (*get_ro)(struct mmc_host *host); int (*get_cd)(struct mmc_host *host); void (*enable_sdio_irq)(struct mmc_host *host, int enable); @@ -132,6 +146,9 @@ struct mmc_host_ops { /* Prepare HS400 target operating frequency depending host driver */ int (*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios); + /* Prepare enhanced strobe depending host driver */ + void (*hs400_enhanced_strobe)(struct mmc_host *host, + struct mmc_ios *ios); int (*select_drive_strength)(struct mmc_card *card, unsigned int max_dtr, int host_drv, int card_drv, int *drv_type); @@ -291,6 +308,9 @@ struct mmc_host { #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17) #define MMC_CAP2_NO_WRITE_PROTECT (1 << 18) /* No physical write protect pin, assume that card is always read-write */ #define MMC_CAP2_NO_SDIO (1 << 19) /* Do not send SDIO commands during initialization */ +#define MMC_CAP2_HS400_ES (1 << 20) /* Host supports enhanced strobe */ +#define MMC_CAP2_NO_SD (1 << 21) /* Do not send SD commands during initialization */ +#define MMC_CAP2_NO_MMC (1 << 22) /* Do not send (e)MMC commands during initialization */ mmc_pm_flag_t pm_caps; /* supported pm features */ @@ -318,6 +338,7 @@ struct mmc_host { unsigned int can_retune:1; /* re-tuning can be used */ unsigned int doing_retune:1; /* re-tuning in progress */ unsigned int retune_now:1; /* do re-tuning at next req */ + unsigned int retune_paused:1; /* re-tuning is temporarily disabled */ int rescan_disable; /* disable card detection */ int rescan_entered; /* used with nonremovable devices */ @@ -501,6 +522,11 @@ static inline bool mmc_card_hs400(struct mmc_card *card) return card->host->ios.timing == MMC_TIMING_MMC_HS400; } +static inline bool mmc_card_hs400es(struct mmc_card *card) +{ + return card->host->ios.enhanced_strobe; +} + void mmc_retune_timer_stop(struct mmc_host *host); static inline void mmc_retune_needed(struct mmc_host *host) @@ -515,4 +541,7 @@ static inline void mmc_retune_recheck(struct mmc_host *host) host->retune_now = 1; } +void mmc_retune_pause(struct mmc_host *host); +void mmc_retune_unpause(struct mmc_host *host); + #endif /* LINUX_MMC_HOST_H */ diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 15f2c4a0a62c..c376209c70ef 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -297,6 +297,7 @@ struct _mmc_csd { #define EXT_CSD_PART_CONFIG 179 /* R/W */ #define EXT_CSD_ERASED_MEM_CONT 181 /* RO */ #define EXT_CSD_BUS_WIDTH 183 /* R/W */ +#define EXT_CSD_STROBE_SUPPORT 184 /* RO */ #define EXT_CSD_HS_TIMING 185 /* R/W */ #define EXT_CSD_POWER_CLASS 187 /* R/W */ #define EXT_CSD_REV 192 /* RO */ @@ -380,12 +381,14 @@ struct _mmc_csd { #define EXT_CSD_CARD_TYPE_HS400_1_2V (1<<7) /* Card can run at 200MHz DDR, 1.2V */ #define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \ EXT_CSD_CARD_TYPE_HS400_1_2V) +#define EXT_CSD_CARD_TYPE_HS400ES (1<<8) /* Card can run at HS400ES */ #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ #define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ #define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ +#define EXT_CSD_BUS_WIDTH_STROBE BIT(7) /* Enhanced strobe mode */ #define EXT_CSD_TIMING_BC 0 /* Backwards compatility */ #define EXT_CSD_TIMING_HS 1 /* High speed */ diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h index 83430f2ea757..0d126aeb3ec0 100644 --- a/include/linux/mmc/sdio_ids.h +++ b/include/linux/mmc/sdio_ids.h @@ -36,6 +36,7 @@ #define SDIO_DEVICE_ID_BROADCOM_43430 0xa9a6 #define SDIO_DEVICE_ID_BROADCOM_4345 0x4345 #define SDIO_DEVICE_ID_BROADCOM_4354 0x4354 +#define SDIO_DEVICE_ID_BROADCOM_4356 0x4356 #define SDIO_VENDOR_ID_INTEL 0x0089 #define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX 0x1402 diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h deleted file mode 100644 index 95d6f0314a7d..000000000000 --- a/include/linux/mmc/sh_mobile_sdhi.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef LINUX_MMC_SH_MOBILE_SDHI_H -#define LINUX_MMC_SH_MOBILE_SDHI_H - -#include <linux/types.h> - -#define SH_MOBILE_SDHI_IRQ_CARD_DETECT "card_detect" -#define SH_MOBILE_SDHI_IRQ_SDCARD "sdcard" -#define SH_MOBILE_SDHI_IRQ_SDIO "sdio" - -#endif /* LINUX_MMC_SH_MOBILE_SDHI_H */ diff --git a/include/linux/mmc/tmio.h b/include/linux/mmc/tmio.h deleted file mode 100644 index 5f5cd80e9765..000000000000 --- a/include/linux/mmc/tmio.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * include/linux/mmc/tmio.h - * - * Copyright (C) 2016 Sang Engineering, Wolfram Sang - * Copyright (C) 2015-16 Renesas Electronics Corporation - * Copyright (C) 2007 Ian Molton - * Copyright (C) 2004 Ian Molton - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Driver for the MMC / SD / SDIO cell found in: - * - * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3 - */ -#ifndef LINUX_MMC_TMIO_H -#define LINUX_MMC_TMIO_H - -#define CTL_SD_CMD 0x00 -#define CTL_ARG_REG 0x04 -#define CTL_STOP_INTERNAL_ACTION 0x08 -#define CTL_XFER_BLK_COUNT 0xa -#define CTL_RESPONSE 0x0c -#define CTL_STATUS 0x1c -#define CTL_STATUS2 0x1e -#define CTL_IRQ_MASK 0x20 -#define CTL_SD_CARD_CLK_CTL 0x24 -#define CTL_SD_XFER_LEN 0x26 -#define CTL_SD_MEM_CARD_OPT 0x28 -#define CTL_SD_ERROR_DETAIL_STATUS 0x2c -#define CTL_SD_DATA_PORT 0x30 -#define CTL_TRANSACTION_CTL 0x34 -#define CTL_SDIO_STATUS 0x36 -#define CTL_SDIO_IRQ_MASK 0x38 -#define CTL_DMA_ENABLE 0xd8 -#define CTL_RESET_SD 0xe0 -#define CTL_VERSION 0xe2 -#define CTL_SDIO_REGS 0x100 -#define CTL_CLK_AND_WAIT_CTL 0x138 -#define CTL_RESET_SDIO 0x1e0 - -/* Definitions for values the CTRL_STATUS register can take. */ -#define TMIO_STAT_CMDRESPEND 0x00000001 -#define TMIO_STAT_DATAEND 0x00000004 -#define TMIO_STAT_CARD_REMOVE 0x00000008 -#define TMIO_STAT_CARD_INSERT 0x00000010 -#define TMIO_STAT_SIGSTATE 0x00000020 -#define TMIO_STAT_WRPROTECT 0x00000080 -#define TMIO_STAT_CARD_REMOVE_A 0x00000100 -#define TMIO_STAT_CARD_INSERT_A 0x00000200 -#define TMIO_STAT_SIGSTATE_A 0x00000400 -#define TMIO_STAT_CMD_IDX_ERR 0x00010000 -#define TMIO_STAT_CRCFAIL 0x00020000 -#define TMIO_STAT_STOPBIT_ERR 0x00040000 -#define TMIO_STAT_DATATIMEOUT 0x00080000 -#define TMIO_STAT_RXOVERFLOW 0x00100000 -#define TMIO_STAT_TXUNDERRUN 0x00200000 -#define TMIO_STAT_CMDTIMEOUT 0x00400000 -#define TMIO_STAT_RXRDY 0x01000000 -#define TMIO_STAT_TXRQ 0x02000000 -#define TMIO_STAT_ILL_FUNC 0x20000000 -#define TMIO_STAT_CMD_BUSY 0x40000000 -#define TMIO_STAT_ILL_ACCESS 0x80000000 - -#define CLK_CTL_DIV_MASK 0xff -#define CLK_CTL_SCLKEN BIT(8) - -#define TMIO_BBS 512 /* Boot block size */ - -#endif /* LINUX_MMC_TMIO_H */ |