diff options
Diffstat (limited to 'include/linux/mmc')
| -rw-r--r-- | include/linux/mmc/card.h | 2 | ||||
| -rw-r--r-- | include/linux/mmc/core.h | 1 | ||||
| -rw-r--r-- | include/linux/mmc/host.h | 6 | ||||
| -rw-r--r-- | include/linux/mmc/sdio_ids.h | 1 |
4 files changed, 10 insertions, 0 deletions
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 279b39008a33..de7377815b6b 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -156,6 +156,7 @@ struct sd_switch_caps { #define UHS_DDR50_MAX_DTR 50000000 #define UHS_SDR25_MAX_DTR UHS_DDR50_MAX_DTR #define UHS_SDR12_MAX_DTR 25000000 +#define DEFAULT_SPEED_MAX_DTR UHS_SDR12_MAX_DTR unsigned int sd3_bus_mode; #define UHS_SDR12_BUS_SPEED 0 #define HIGH_SPEED_BUS_SPEED 1 @@ -252,6 +253,7 @@ struct mmc_card { #define MMC_TYPE_SD_COMBO 3 /* SD combo (IO+mem) card */ unsigned int state; /* (our) card state */ unsigned int quirks; /* card quirks */ + unsigned int quirk_max_rate; /* max rate set by quirks */ #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ /* for byte mode */ diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 927519385482..134a6483347a 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -177,6 +177,7 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries); int mmc_hw_reset(struct mmc_host *host); +int mmc_sw_reset(struct mmc_host *host); void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card); #endif /* LINUX_MMC_CORE_H */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 85146235231e..64300a48dcce 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -22,6 +22,7 @@ struct mmc_ios { unsigned int clock; /* clock rate */ unsigned short vdd; + unsigned int power_delay_ms; /* waiting for stable power */ /* vdd stores the bit number of the selected voltage range from below. */ @@ -320,6 +321,9 @@ struct mmc_host { #define MMC_CAP_UHS_SDR50 (1 << 18) /* Host supports UHS SDR50 mode */ #define MMC_CAP_UHS_SDR104 (1 << 19) /* Host supports UHS SDR104 mode */ #define MMC_CAP_UHS_DDR50 (1 << 20) /* Host supports UHS DDR50 mode */ +#define MMC_CAP_UHS (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | \ + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | \ + MMC_CAP_UHS_DDR50) /* (1 << 21) is free for reuse */ #define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */ #define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */ @@ -345,6 +349,7 @@ struct mmc_host { #define MMC_CAP2_HS400_1_2V (1 << 16) /* Can support HS400 1.2V */ #define MMC_CAP2_HS400 (MMC_CAP2_HS400_1_8V | \ MMC_CAP2_HS400_1_2V) +#define MMC_CAP2_HSX00_1_8V (MMC_CAP2_HS200_1_8V_SDR | MMC_CAP2_HS400_1_8V) #define MMC_CAP2_HSX00_1_2V (MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V) #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17) #define MMC_CAP2_NO_WRITE_PROTECT (1 << 18) /* No physical write protect pin, assume that card is always read-write */ @@ -354,6 +359,7 @@ struct mmc_host { #define MMC_CAP2_NO_MMC (1 << 22) /* Do not send (e)MMC commands during initialization */ #define MMC_CAP2_CQE (1 << 23) /* Has eMMC command queue engine */ #define MMC_CAP2_CQE_DCMD (1 << 24) /* CQE can issue a direct command */ +#define MMC_CAP2_AVOID_3_3V (1 << 25) /* Host must negotiate down from 3.3V */ int fixed_drv_type; /* fixed driver type for non-removable media */ diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h index cdd66a5fbd5e..2836a96e014a 100644 --- a/include/linux/mmc/sdio_ids.h +++ b/include/linux/mmc/sdio_ids.h @@ -55,6 +55,7 @@ #define SDIO_DEVICE_ID_MARVELL_8688WLAN 0x9104 #define SDIO_DEVICE_ID_MARVELL_8688BT 0x9105 #define SDIO_DEVICE_ID_MARVELL_8797_F0 0x9128 +#define SDIO_DEVICE_ID_MARVELL_8887WLAN 0x9134 #define SDIO_VENDOR_ID_SIANO 0x039a #define SDIO_DEVICE_ID_SIANO_NOVA_B0 0x0201 |