diff options
Diffstat (limited to 'include/linux/mfd')
| -rw-r--r-- | include/linux/mfd/axp20x.h | 98 | ||||
| -rw-r--r-- | include/linux/mfd/cs42l43.h | 13 | ||||
| -rw-r--r-- | include/linux/mfd/da9055/pdata.h | 13 | ||||
| -rw-r--r-- | include/linux/mfd/lp8788.h | 9 | ||||
| -rw-r--r-- | include/linux/mfd/max8997.h | 1 | ||||
| -rw-r--r-- | include/linux/mfd/max8998.h | 6 | ||||
| -rw-r--r-- | include/linux/mfd/sun4i-gpadc.h | 4 | ||||
| -rw-r--r-- | include/linux/mfd/syscon.h | 25 | ||||
| -rw-r--r-- | include/linux/mfd/twl.h | 1 |
9 files changed, 116 insertions, 54 deletions
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index f1755163dd9f..8c0a33a2e9ce 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -19,6 +19,7 @@ enum axp20x_variants { AXP223_ID, AXP288_ID, AXP313A_ID, + AXP717_ID, AXP803_ID, AXP806_ID, AXP809_ID, @@ -104,15 +105,47 @@ enum axp20x_variants { #define AXP313A_ON_INDICATE 0x00 #define AXP313A_OUTPUT_CONTROL 0x10 -#define AXP313A_DCDC1_CONRTOL 0x13 -#define AXP313A_DCDC2_CONRTOL 0x14 -#define AXP313A_DCDC3_CONRTOL 0x15 -#define AXP313A_ALDO1_CONRTOL 0x16 -#define AXP313A_DLDO1_CONRTOL 0x17 +#define AXP313A_DCDC1_CONTROL 0x13 +#define AXP313A_DCDC2_CONTROL 0x14 +#define AXP313A_DCDC3_CONTROL 0x15 +#define AXP313A_ALDO1_CONTROL 0x16 +#define AXP313A_DLDO1_CONTROL 0x17 #define AXP313A_SHUTDOWN_CTRL 0x1a #define AXP313A_IRQ_EN 0x20 #define AXP313A_IRQ_STATE 0x21 +#define AXP717_ON_INDICATE 0x00 +#define AXP717_IRQ0_EN 0x40 +#define AXP717_IRQ1_EN 0x41 +#define AXP717_IRQ2_EN 0x42 +#define AXP717_IRQ3_EN 0x43 +#define AXP717_IRQ4_EN 0x44 +#define AXP717_IRQ0_STATE 0x48 +#define AXP717_IRQ1_STATE 0x49 +#define AXP717_IRQ2_STATE 0x4a +#define AXP717_IRQ3_STATE 0x4b +#define AXP717_IRQ4_STATE 0x4c +#define AXP717_DCDC_OUTPUT_CONTROL 0x80 +#define AXP717_DCDC1_CONTROL 0x83 +#define AXP717_DCDC2_CONTROL 0x84 +#define AXP717_DCDC3_CONTROL 0x85 +#define AXP717_DCDC4_CONTROL 0x86 +#define AXP717_LDO0_OUTPUT_CONTROL 0x90 +#define AXP717_LDO1_OUTPUT_CONTROL 0x91 +#define AXP717_ALDO1_CONTROL 0x93 +#define AXP717_ALDO2_CONTROL 0x94 +#define AXP717_ALDO3_CONTROL 0x95 +#define AXP717_ALDO4_CONTROL 0x96 +#define AXP717_BLDO1_CONTROL 0x97 +#define AXP717_BLDO2_CONTROL 0x98 +#define AXP717_BLDO3_CONTROL 0x99 +#define AXP717_BLDO4_CONTROL 0x9a +#define AXP717_CLDO1_CONTROL 0x9b +#define AXP717_CLDO2_CONTROL 0x9c +#define AXP717_CLDO3_CONTROL 0x9d +#define AXP717_CLDO4_CONTROL 0x9e +#define AXP717_CPUSLDO_CONTROL 0x9f + #define AXP806_STARTUP_SRC 0x00 #define AXP806_CHIP_ID 0x03 #define AXP806_PWR_OUT_CTRL1 0x10 @@ -434,6 +467,27 @@ enum { }; enum { + AXP717_DCDC1 = 0, + AXP717_DCDC2, + AXP717_DCDC3, + AXP717_DCDC4, + AXP717_ALDO1, + AXP717_ALDO2, + AXP717_ALDO3, + AXP717_ALDO4, + AXP717_BLDO1, + AXP717_BLDO2, + AXP717_BLDO3, + AXP717_BLDO4, + AXP717_CLDO1, + AXP717_CLDO2, + AXP717_CLDO3, + AXP717_CLDO4, + AXP717_CPUSLDO, + AXP717_REG_ID_MAX, +}; + +enum { AXP806_DCDCA = 0, AXP806_DCDCB, AXP806_DCDCC, @@ -732,6 +786,40 @@ enum axp313a_irqs { AXP313A_IRQ_PEK_RIS_EDGE, }; +enum axp717_irqs { + AXP717_IRQ_VBUS_FAULT, + AXP717_IRQ_VBUS_OVER_V, + AXP717_IRQ_BOOST_OVER_V, + AXP717_IRQ_GAUGE_NEW_SOC = 4, + AXP717_IRQ_SOC_DROP_LVL1 = 6, + AXP717_IRQ_SOC_DROP_LVL2, + AXP717_IRQ_PEK_RIS_EDGE, + AXP717_IRQ_PEK_FAL_EDGE, + AXP717_IRQ_PEK_LONG, + AXP717_IRQ_PEK_SHORT, + AXP717_IRQ_BATT_REMOVAL, + AXP717_IRQ_BATT_PLUGIN, + AXP717_IRQ_VBUS_REMOVAL, + AXP717_IRQ_VBUS_PLUGIN, + AXP717_IRQ_BATT_OVER_V, + AXP717_IRQ_CHARG_TIMER, + AXP717_IRQ_DIE_TEMP_HIGH, + AXP717_IRQ_CHARG, + AXP717_IRQ_CHARG_DONE, + AXP717_IRQ_BATT_OVER_CURR, + AXP717_IRQ_LDO_OVER_CURR, + AXP717_IRQ_WDOG_EXPIRE, + AXP717_IRQ_BATT_ACT_TEMP_LOW, + AXP717_IRQ_BATT_ACT_TEMP_HIGH, + AXP717_IRQ_BATT_CHG_TEMP_LOW, + AXP717_IRQ_BATT_CHG_TEMP_HIGH, + AXP717_IRQ_BATT_QUIT_TEMP_HIGH, + AXP717_IRQ_BC_USB_CHNG = 30, + AXP717_IRQ_BC_USB_DONE, + AXP717_IRQ_TYPEC_PLUGIN = 37, + AXP717_IRQ_TYPEC_REMOVE, +}; + enum axp803_irqs { AXP803_IRQ_ACIN_OVER_V = 1, AXP803_IRQ_ACIN_PLUGIN, diff --git a/include/linux/mfd/cs42l43.h b/include/linux/mfd/cs42l43.h index cf8263aab41b..2239d8585e78 100644 --- a/include/linux/mfd/cs42l43.h +++ b/include/linux/mfd/cs42l43.h @@ -6,20 +6,21 @@ * Cirrus Logic International Semiconductor Ltd. */ +#ifndef CS42L43_CORE_EXT_H +#define CS42L43_CORE_EXT_H + #include <linux/completion.h> -#include <linux/device.h> -#include <linux/gpio/consumer.h> #include <linux/mutex.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> -#include <linux/soundwire/sdw.h> #include <linux/workqueue.h> -#ifndef CS42L43_CORE_EXT_H -#define CS42L43_CORE_EXT_H - #define CS42L43_N_SUPPLIES 3 +struct device; +struct gpio_desc; +struct sdw_slave; + enum cs42l43_irq_numbers { CS42L43_PLL_LOST_LOCK, CS42L43_PLL_READY, diff --git a/include/linux/mfd/da9055/pdata.h b/include/linux/mfd/da9055/pdata.h index d3f126990ad0..137a2b067512 100644 --- a/include/linux/mfd/da9055/pdata.h +++ b/include/linux/mfd/da9055/pdata.h @@ -7,7 +7,6 @@ #define DA9055_MAX_REGULATORS 8 struct da9055; -struct gpio_desc; enum gpio_select { NO_GPIO = 0, @@ -24,16 +23,6 @@ struct da9055_pdata { /* Enable RTC in RESET Mode */ bool reset_enable; /* - * GPI muxed pin to control - * regulator state A/B, 0 if not available. - */ - int *gpio_ren; - /* - * GPI muxed pin to control - * regulator set, 0 if not available. - */ - int *gpio_rsel; - /* * Regulator mode control bits value (GPI offset) that * controls the regulator state, 0 if not available. */ @@ -43,7 +32,5 @@ struct da9055_pdata { * controls the regulator set A/B, 0 if not available. */ enum gpio_select *reg_rsel; - /* GPIO descriptors to enable regulator, NULL if not available */ - struct gpio_desc **ena_gpiods; }; #endif /* __DA9055_PDATA_H */ diff --git a/include/linux/mfd/lp8788.h b/include/linux/mfd/lp8788.h index 3d5c480d58ea..51b47966a04d 100644 --- a/include/linux/mfd/lp8788.h +++ b/include/linux/mfd/lp8788.h @@ -10,7 +10,6 @@ #ifndef __MFD_LP8788_H__ #define __MFD_LP8788_H__ -#include <linux/gpio.h> #include <linux/irqdomain.h> #include <linux/pwm.h> #include <linux/regmap.h> @@ -159,21 +158,17 @@ struct lp8788; /* * lp8788_buck1_dvs - * @gpio : gpio pin number for dvs control * @vsel : dvs selector for buck v1 register */ struct lp8788_buck1_dvs { - int gpio; enum lp8788_dvs_sel vsel; }; /* * lp8788_buck2_dvs - * @gpio : two gpio pin numbers are used for dvs * @vsel : dvs selector for buck v2 register */ struct lp8788_buck2_dvs { - int gpio[LP8788_NUM_BUCK2_DVS]; enum lp8788_dvs_sel vsel; }; @@ -268,8 +263,8 @@ struct lp8788_vib_platform_data { * @buck_data : regulator initial data for buck * @dldo_data : regulator initial data for digital ldo * @aldo_data : regulator initial data for analog ldo - * @buck1_dvs : gpio configurations for buck1 dvs - * @buck2_dvs : gpio configurations for buck2 dvs + * @buck1_dvs : configurations for buck1 dvs + * @buck2_dvs : configurations for buck2 dvs * @chg_pdata : platform data for charger driver * @alarm_sel : rtc alarm selection (1 or 2) * @bl_pdata : configurable data for backlight driver diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index 6193905abbb5..5c2cc1103437 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -178,7 +178,6 @@ struct max8997_platform_data { * */ bool ignore_gpiodvs_side_effect; - int buck125_gpios[3]; /* GPIO of [0]SET1, [1]SET2, [2]SET3 */ int buck125_default_idx; /* Default value of SET1, 2, 3 */ unsigned int buck1_voltage[8]; /* buckx_voltage in uV */ bool buck1_gpiodvs; diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h index 79c020bd0c70..a054e55c8646 100644 --- a/include/linux/mfd/max8998.h +++ b/include/linux/mfd/max8998.h @@ -65,10 +65,7 @@ struct max8998_regulator_data { * be other than the preset values. * @buck1_voltage: BUCK1 DVS mode 1 voltage registers * @buck2_voltage: BUCK2 DVS mode 2 voltage registers - * @buck1_set1: BUCK1 gpio pin 1 to set output voltage - * @buck1_set2: BUCK1 gpio pin 2 to set output voltage * @buck1_default_idx: Default for BUCK1 gpio pin 1, 2 - * @buck2_set3: BUCK2 gpio pin to set output voltage * @buck2_default_idx: Default for BUCK2 gpio pin. * @wakeup: Allow to wake up from suspend * @rtc_delay: LP3974 RTC chip bug that requires delay after a register @@ -91,10 +88,7 @@ struct max8998_platform_data { bool buck_voltage_lock; int buck1_voltage[4]; int buck2_voltage[2]; - int buck1_set1; - int buck1_set2; int buck1_default_idx; - int buck2_set3; int buck2_default_idx; bool wakeup; bool rtc_delay; diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h index ea0ccf33a459..021f820f9d52 100644 --- a/include/linux/mfd/sun4i-gpadc.h +++ b/include/linux/mfd/sun4i-gpadc.h @@ -81,8 +81,8 @@ #define SUN4I_GPADC_TEMP_DATA 0x20 #define SUN4I_GPADC_DATA 0x24 -#define SUN4I_GPADC_IRQ_FIFO_DATA 0 -#define SUN4I_GPADC_IRQ_TEMP_DATA 1 +#define SUN4I_GPADC_IRQ_FIFO_DATA 1 +#define SUN4I_GPADC_IRQ_TEMP_DATA 2 /* 10s delay before suspending the IP */ #define SUN4I_GPADC_AUTOSUSPEND_DELAY 10000 diff --git a/include/linux/mfd/syscon.h b/include/linux/mfd/syscon.h index fecc2fa2a364..c315903f6dab 100644 --- a/include/linux/mfd/syscon.h +++ b/include/linux/mfd/syscon.h @@ -17,20 +17,17 @@ struct device_node; #ifdef CONFIG_MFD_SYSCON -extern struct regmap *device_node_to_regmap(struct device_node *np); -extern struct regmap *syscon_node_to_regmap(struct device_node *np); -extern struct regmap *syscon_regmap_lookup_by_compatible(const char *s); -extern struct regmap *syscon_regmap_lookup_by_phandle( - struct device_node *np, - const char *property); -extern struct regmap *syscon_regmap_lookup_by_phandle_args( - struct device_node *np, - const char *property, - int arg_count, - unsigned int *out_args); -extern struct regmap *syscon_regmap_lookup_by_phandle_optional( - struct device_node *np, - const char *property); +struct regmap *device_node_to_regmap(struct device_node *np); +struct regmap *syscon_node_to_regmap(struct device_node *np); +struct regmap *syscon_regmap_lookup_by_compatible(const char *s); +struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np, + const char *property); +struct regmap *syscon_regmap_lookup_by_phandle_args(struct device_node *np, + const char *property, + int arg_count, + unsigned int *out_args); +struct regmap *syscon_regmap_lookup_by_phandle_optional(struct device_node *np, + const char *property); #else static inline struct regmap *device_node_to_regmap(struct device_node *np) { diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h index c062d91a67d9..85dc406173db 100644 --- a/include/linux/mfd/twl.h +++ b/include/linux/mfd/twl.h @@ -461,6 +461,7 @@ static inline int twl6030_mmc_card_detect(struct device *dev, int slot) #define TWL4030_PM_MASTER_GLOBAL_TST 0xb6 +#define TWL6030_PHOENIX_DEV_ON 0x06 /*----------------------------------------------------------------------*/ /* Power bus message definitions */ |