diff options
Diffstat (limited to 'drivers/usb/serial/mos7840.c')
| -rw-r--r-- | drivers/usb/serial/mos7840.c | 46 |
1 files changed, 30 insertions, 16 deletions
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 9a220b8e810f..3821c53fcee9 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -214,7 +214,6 @@ MODULE_DEVICE_TABLE(usb, id_table); struct moschip_port { int port_num; /*Actual port number in the device(1,2,etc) */ - struct urb *write_urb; /* write URB for this port */ struct urb *read_urb; /* read URB for this port */ __u8 shadowLCR; /* last LCR value received */ __u8 shadowMCR; /* last MCR value received */ @@ -285,9 +284,15 @@ static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg, ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, MCS_RD_RTYPE, 0, reg, buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + if (ret < VENDOR_READ_LENGTH) { + if (ret >= 0) + ret = -EIO; + goto out; + } + *val = buf[0]; dev_dbg(&port->dev, "%s offset is %x, return val %x\n", __func__, reg, *val); - +out: kfree(buf); return ret; } @@ -353,8 +358,13 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + if (ret < VENDOR_READ_LENGTH) { + if (ret >= 0) + ret = -EIO; + goto out; + } *val = buf[0]; - +out: kfree(buf); return ret; } @@ -1024,6 +1034,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) * (can't set it up in mos7840_startup as the structures * * were not set up at that time.) */ if (port0->open_ports == 1) { + /* FIXME: Buffer never NULL, so URB is not submitted. */ if (serial->port[0]->interrupt_in_buffer == NULL) { /* set up interrupt urb */ usb_fill_int_urb(serial->port[0]->interrupt_in_urb, @@ -1037,9 +1048,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) serial, serial->port[0]->interrupt_in_urb->interval); - /* start interrupt read for mos7840 * - * will continue as long as mos7840 is connected */ - + /* start interrupt read for mos7840 */ response = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); @@ -1186,7 +1195,6 @@ static void mos7840_close(struct usb_serial_port *port) } } - usb_kill_urb(mos7840_port->write_urb); usb_kill_urb(mos7840_port->read_urb); mos7840_port->read_urb_busy = false; @@ -1199,12 +1207,6 @@ static void mos7840_close(struct usb_serial_port *port) } } - if (mos7840_port->write_urb) { - /* if this urb had a transfer buffer already (old tx) free it */ - kfree(mos7840_port->write_urb->transfer_buffer); - usb_free_urb(mos7840_port->write_urb); - } - Data = 0x0; mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); @@ -1489,10 +1491,10 @@ static int mos7840_tiocmget(struct tty_struct *tty) return -ENODEV; status = mos7840_get_uart_reg(port, MODEM_STATUS_REGISTER, &msr); - if (status != 1) + if (status < 0) return -EIO; status = mos7840_get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr); - if (status != 1) + if (status < 0) return -EIO; result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) @@ -1962,7 +1964,6 @@ static int mos7840_get_serial_info(struct moschip_port *mos7840_port, tmp.line = mos7840_port->port->minor; tmp.port = mos7840_port->port->port_number; tmp.irq = 0; - tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; tmp.baud_base = 9600; tmp.close_delay = 5 * HZ; @@ -2113,6 +2114,18 @@ static int mos7840_calc_num_ports(struct usb_serial *serial) return mos7840_num_ports; } +static int mos7840_attach(struct usb_serial *serial) +{ + if (serial->num_bulk_in < serial->num_ports || + serial->num_bulk_out < serial->num_ports || + serial->num_interrupt_in < 1) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int mos7840_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; @@ -2388,6 +2401,7 @@ static struct usb_serial_driver moschip7840_4port_device = { .tiocmset = mos7840_tiocmset, .tiocmiwait = usb_serial_generic_tiocmiwait, .get_icount = usb_serial_generic_get_icount, + .attach = mos7840_attach, .port_probe = mos7840_port_probe, .port_remove = mos7840_port_remove, .read_bulk_callback = mos7840_bulk_in_callback, |