diff options
Diffstat (limited to 'drivers/usb/host')
-rw-r--r-- | drivers/usb/host/fotg210-hcd.c | 4 | ||||
-rw-r--r-- | drivers/usb/host/ohci-hcd.c | 15 | ||||
-rw-r--r-- | drivers/usb/host/xhci-rcar.c | 11 | ||||
-rw-r--r-- | drivers/usb/host/xhci-tegra.c | 10 | ||||
-rw-r--r-- | drivers/usb/host/xhci.c | 10 |
5 files changed, 44 insertions, 6 deletions
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index 77cc36efae95..0dbfa5c10703 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -1629,6 +1629,10 @@ static int fotg210_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* see what we found out */ temp = check_reset_complete(fotg210, wIndex, status_reg, fotg210_readl(fotg210, status_reg)); + + /* restart schedule */ + fotg210->command |= CMD_RUN; + fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command); } if (!(temp & (PORT_RESUME|PORT_RESET))) { diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index b457fdaff297..1fe3deec35cf 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -419,8 +419,7 @@ static void ohci_usb_reset (struct ohci_hcd *ohci) * other cases where the next software may expect clean state from the * "firmware". this is bus-neutral, unlike shutdown() methods. */ -static void -ohci_shutdown (struct usb_hcd *hcd) +static void _ohci_shutdown(struct usb_hcd *hcd) { struct ohci_hcd *ohci; @@ -436,6 +435,16 @@ ohci_shutdown (struct usb_hcd *hcd) ohci->rh_state = OHCI_RH_HALTED; } +static void ohci_shutdown(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + unsigned long flags; + + spin_lock_irqsave(&ohci->lock, flags); + _ohci_shutdown(hcd); + spin_unlock_irqrestore(&ohci->lock, flags); +} + /*-------------------------------------------------------------------------* * HC functions *-------------------------------------------------------------------------*/ @@ -760,7 +769,7 @@ static void io_watchdog_func(struct timer_list *t) died: usb_hc_died(ohci_to_hcd(ohci)); ohci_dump(ohci); - ohci_shutdown(ohci_to_hcd(ohci)); + _ohci_shutdown(ohci_to_hcd(ohci)); goto done; } else { /* No write back because the done queue was empty */ diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index 671bce18782c..2b0ccd150209 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -104,7 +104,7 @@ static int xhci_rcar_is_gen2(struct device *dev) return of_device_is_compatible(node, "renesas,xhci-r8a7790") || of_device_is_compatible(node, "renesas,xhci-r8a7791") || of_device_is_compatible(node, "renesas,xhci-r8a7793") || - of_device_is_compatible(node, "renensas,rcar-gen2-xhci"); + of_device_is_compatible(node, "renesas,rcar-gen2-xhci"); } static int xhci_rcar_is_gen3(struct device *dev) @@ -238,10 +238,15 @@ int xhci_rcar_init_quirk(struct usb_hcd *hcd) * pointers. So, this driver clears the AC64 bit of xhci->hcc_params * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in * xhci_gen_setup(). + * + * And, since the firmware/internal CPU control the USBSTS.STS_HALT + * and the process speed is down when the roothub port enters U3, + * long delay for the handshake of STS_HALT is neeed in xhci_suspend(). */ if (xhci_rcar_is_gen2(hcd->self.controller) || - xhci_rcar_is_gen3(hcd->self.controller)) - xhci->quirks |= XHCI_NO_64BIT_SUPPORT; + xhci_rcar_is_gen3(hcd->self.controller)) { + xhci->quirks |= XHCI_NO_64BIT_SUPPORT | XHCI_SLOW_SUSPEND; + } if (!xhci_rcar_wait_for_pll_active(hcd)) return -ETIMEDOUT; diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index dafc65911fc0..2ff7c911fbd0 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1194,6 +1194,16 @@ static int tegra_xusb_probe(struct platform_device *pdev) tegra_xusb_config(tegra, regs); + /* + * The XUSB Falcon microcontroller can only address 40 bits, so set + * the DMA mask accordingly. + */ + err = dma_set_mask_and_coherent(tegra->dev, DMA_BIT_MASK(40)); + if (err < 0) { + dev_err(&pdev->dev, "failed to set DMA mask: %d\n", err); + goto put_rpm; + } + err = tegra_xusb_load_firmware(tegra); if (err < 0) { dev_err(&pdev->dev, "failed to load firmware: %d\n", err); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 248cd7a8b163..03d1e552769b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3089,8 +3089,18 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd, return; udev = (struct usb_device *) host_ep->hcpriv; vdev = xhci->devs[udev->slot_id]; + + /* + * vdev may be lost due to xHC restore error and re-initialization + * during S3/S4 resume. A new vdev will be allocated later by + * xhci_discover_or_reset_device() + */ + if (!udev->slot_id || !vdev) + return; ep_index = xhci_get_endpoint_index(&host_ep->desc); ep = &vdev->eps[ep_index]; + if (!ep) + return; /* Bail out if toggle is already being cleared by a endpoint reset */ if (ep->ep_state & EP_HARD_CLEAR_TOGGLE) { |