diff options
Diffstat (limited to 'drivers/usb/host')
| -rw-r--r-- | drivers/usb/host/ohci-at91.c | 11 | ||||
| -rw-r--r-- | drivers/usb/host/whci/qset.c | 4 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-hub.c | 62 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-pci.c | 8 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-ring.c | 35 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.c | 18 |
6 files changed, 92 insertions, 46 deletions
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 342ffd140122..8c6e15bd6ff0 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -473,6 +473,8 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) if (!pdata) return -ENOMEM; + pdev->dev.platform_data = pdata; + if (!of_property_read_u32(np, "num-ports", &ports)) pdata->ports = ports; @@ -483,6 +485,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) */ if (i >= pdata->ports) { pdata->vbus_pin[i] = -EINVAL; + pdata->overcurrent_pin[i] = -EINVAL; continue; } @@ -513,10 +516,8 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) } at91_for_each_port(i) { - if (i >= pdata->ports) { - pdata->overcurrent_pin[i] = -EINVAL; - continue; - } + if (i >= pdata->ports) + break; pdata->overcurrent_pin[i] = of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags); @@ -552,8 +553,6 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) } } - pdev->dev.platform_data = pdata; - device_init_wakeup(&pdev->dev, 1); return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev); } diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c index dc31c425ce01..9f1c0538b211 100644 --- a/drivers/usb/host/whci/qset.c +++ b/drivers/usb/host/whci/qset.c @@ -377,6 +377,10 @@ static int qset_fill_page_list(struct whc *whc, struct whc_std *std, gfp_t mem_f if (std->pl_virt == NULL) return -ENOMEM; std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, pl_len, DMA_TO_DEVICE); + if (dma_mapping_error(whc->wusbhc.dev, std->dma_addr)) { + kfree(std->pl_virt); + return -EFAULT; + } for (p = 0; p < std->num_pointers; p++) { std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 5d2d7e954bd4..f980c239eded 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -733,8 +733,30 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, if ((raw_port_status & PORT_RESET) || !(raw_port_status & PORT_PE)) return 0xffffffff; - if (time_after_eq(jiffies, - bus_state->resume_done[wIndex])) { + /* did port event handler already start resume timing? */ + if (!bus_state->resume_done[wIndex]) { + /* If not, maybe we are in a host initated resume? */ + if (test_bit(wIndex, &bus_state->resuming_ports)) { + /* Host initated resume doesn't time the resume + * signalling using resume_done[]. + * It manually sets RESUME state, sleeps 20ms + * and sets U0 state. This should probably be + * changed, but not right now. + */ + } else { + /* port resume was discovered now and here, + * start resume timing + */ + unsigned long timeout = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); + + set_bit(wIndex, &bus_state->resuming_ports); + bus_state->resume_done[wIndex] = timeout; + mod_timer(&hcd->rh_timer, timeout); + } + /* Has resume been signalled for USB_RESUME_TIME yet? */ + } else if (time_after_eq(jiffies, + bus_state->resume_done[wIndex])) { int time_left; xhci_dbg(xhci, "Resume USB2 port %d\n", @@ -775,19 +797,35 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, } else { /* * The resume has been signaling for less than - * 20ms. Report the port status as SUSPEND, - * let the usbcore check port status again - * and clear resume signaling later. + * USB_RESUME_TIME. Report the port status as SUSPEND, + * let the usbcore check port status again and clear + * resume signaling later. */ status |= USB_PORT_STAT_SUSPEND; } } - if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 - && (raw_port_status & PORT_POWER) - && (bus_state->suspended_ports & (1 << wIndex))) { - bus_state->suspended_ports &= ~(1 << wIndex); - if (hcd->speed < HCD_USB3) - bus_state->port_c_suspend |= 1 << wIndex; + /* + * Clear stale usb2 resume signalling variables in case port changed + * state during resume signalling. For example on error + */ + if ((bus_state->resume_done[wIndex] || + test_bit(wIndex, &bus_state->resuming_ports)) && + (raw_port_status & PORT_PLS_MASK) != XDEV_U3 && + (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) { + bus_state->resume_done[wIndex] = 0; + clear_bit(wIndex, &bus_state->resuming_ports); + } + + + if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 && + (raw_port_status & PORT_POWER)) { + if (bus_state->suspended_ports & (1 << wIndex)) { + bus_state->suspended_ports &= ~(1 << wIndex); + if (hcd->speed < HCD_USB3) + bus_state->port_c_suspend |= 1 << wIndex; + } + bus_state->resume_done[wIndex] = 0; + clear_bit(wIndex, &bus_state->resuming_ports); } if (raw_port_status & PORT_CONNECT) { status |= USB_PORT_STAT_CONNECTION; @@ -1112,6 +1150,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, if ((temp & PORT_PE) == 0) goto error; + set_bit(wIndex, &bus_state->resuming_ports); xhci_set_link_state(xhci, port_array, wIndex, XDEV_RESUME); spin_unlock_irqrestore(&xhci->lock, flags); @@ -1119,6 +1158,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, spin_lock_irqsave(&xhci->lock, flags); xhci_set_link_state(xhci, port_array, wIndex, XDEV_U0); + clear_bit(wIndex, &bus_state->resuming_ports); } bus_state->port_c_suspend |= 1 << wIndex; diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 17f6897acde2..c62109091d12 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -188,10 +188,14 @@ static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) 0xb7, 0x0c, 0x34, 0xac, 0x01, 0xe9, 0xbf, 0x45, 0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23, }; - acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1, NULL); + union acpi_object *obj; + + obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1, + NULL); + ACPI_FREE(obj); } #else - static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } +static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } #endif /* CONFIG_ACPI */ /* called during probe() after chip reset completes */ diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index fa836251ca21..eeaa6c6bd540 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1583,7 +1583,8 @@ static void handle_port_status(struct xhci_hcd *xhci, */ bogus_port_status = true; goto cleanup; - } else { + } else if (!test_bit(faked_port_index, + &bus_state->resuming_ports)) { xhci_dbg(xhci, "resume HS port %d\n", port_id); bus_state->resume_done[faked_port_index] = jiffies + msecs_to_jiffies(USB_RESUME_TIMEOUT); @@ -3896,28 +3897,6 @@ cleanup: return ret; } -static int ep_ring_is_processing(struct xhci_hcd *xhci, - int slot_id, unsigned int ep_index) -{ - struct xhci_virt_device *xdev; - struct xhci_ring *ep_ring; - struct xhci_ep_ctx *ep_ctx; - struct xhci_virt_ep *xep; - dma_addr_t hw_deq; - - xdev = xhci->devs[slot_id]; - xep = &xhci->devs[slot_id]->eps[ep_index]; - ep_ring = xep->ring; - ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); - - if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) != EP_STATE_RUNNING) - return 0; - - hw_deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK; - return (hw_deq != - xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue)); -} - /* * Check transfer ring to guarantee there is enough room for the urb. * Update ISO URB start_frame and interval. @@ -3983,10 +3962,12 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, } /* Calculate the start frame and put it in urb->start_frame. */ - if (HCC_CFC(xhci->hcc_params) && - ep_ring_is_processing(xhci, slot_id, ep_index)) { - urb->start_frame = xep->next_frame_id; - goto skip_start_over; + if (HCC_CFC(xhci->hcc_params) && !list_empty(&ep_ring->td_list)) { + if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) == + EP_STATE_RUNNING) { + urb->start_frame = xep->next_frame_id; + goto skip_start_over; + } } start_frame = readl(&xhci->run_regs->microframe_index); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 6e7dc6f93978..3f912705dcef 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -175,6 +175,16 @@ int xhci_reset(struct xhci_hcd *xhci) command |= CMD_RESET; writel(command, &xhci->op_regs->command); + /* Existing Intel xHCI controllers require a delay of 1 mS, + * after setting the CMD_RESET bit, and before accessing any + * HC registers. This allows the HC to complete the + * reset operation and be ready for HC register access. + * Without this delay, the subsequent HC register access, + * may result in a system hang very rarely. + */ + if (xhci->quirks & XHCI_INTEL_HOST) + udelay(1000); + ret = xhci_handshake(&xhci->op_regs->command, CMD_RESET, 0, 10 * 1000 * 1000); if (ret) @@ -4768,8 +4778,16 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG); slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx); slot_ctx->dev_info |= cpu_to_le32(DEV_HUB); + /* + * refer to section 6.2.2: MTT should be 0 for full speed hub, + * but it may be already set to 1 when setup an xHCI virtual + * device, so clear it anyway. + */ if (tt->multi) slot_ctx->dev_info |= cpu_to_le32(DEV_MTT); + else if (hdev->speed == USB_SPEED_FULL) + slot_ctx->dev_info &= cpu_to_le32(~DEV_MTT); + if (xhci->hci_version > 0x95) { xhci_dbg(xhci, "xHCI version %x needs hub " "TT think time and number of ports\n", |