diff options
Diffstat (limited to 'drivers/usb/host/xhci-pci.c')
| -rw-r--r-- | drivers/usb/host/xhci-pci.c | 14 |
1 files changed, 13 insertions, 1 deletions
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 7bc18cf8042c..1c9a7957c45c 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -59,6 +59,7 @@ #define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI 0x1138 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI 0x461e +#define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba #define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb @@ -182,6 +183,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1))) xhci->quirks |= XHCI_U2_DISABLE_WAKE; + if (pdev->vendor == PCI_VENDOR_ID_AMD && + pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI) + xhci->quirks |= XHCI_BROKEN_D3COLD; + if (pdev->vendor == PCI_VENDOR_ID_INTEL) { xhci->quirks |= XHCI_LPM_SUPPORT; xhci->quirks |= XHCI_INTEL_HOST; @@ -539,7 +544,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) * Systems with the TI redriver that loses port status change events * need to have the registers polled during D3, so avoid D3cold. */ - if (xhci->quirks & XHCI_COMP_MODE_QUIRK) + if (xhci->quirks & (XHCI_COMP_MODE_QUIRK | XHCI_BROKEN_D3COLD)) pci_d3cold_disable(pdev); if (xhci->quirks & XHCI_PME_STUCK_QUIRK) @@ -631,7 +636,14 @@ static const struct pci_device_id pci_ids[] = { { /* end: all zeroes */ } }; MODULE_DEVICE_TABLE(pci, pci_ids); + +/* + * Without CONFIG_USB_XHCI_PCI_RENESAS renesas_xhci_check_request_fw() won't + * load firmware, so don't encumber the xhci-pci driver with it. + */ +#if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS) MODULE_FIRMWARE("renesas_usb_fw.mem"); +#endif /* pci driver glue; this is a "new style" PCI driver module */ static struct pci_driver xhci_pci_driver = { |