1 files changed, 26 insertions, 14 deletions

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index ddb79f23fb3b..b9ae5c2a2527 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/acpi.h>
 #include <linux/reset.h>
+#include <linux/suspend.h>
 
 #include "xhci.h"
 #include "xhci-trace.h"
@@ -107,9 +108,6 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci)
 	struct usb_hcd *hcd = xhci_to_hcd(xhci);
 	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
 
-	if (xhci->quirks & XHCI_PLAT)
-		return;
-
 	/* return if using legacy interrupt */
 	if (hcd->irq > 0)
 		return;
@@ -207,10 +205,6 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
 	struct pci_dev  *pdev;
 	int ret;
 
-	/* The xhci platform device has set up IRQs through usb_add_hcd. */
-	if (xhci->quirks & XHCI_PLAT)
-		return 0;
-
 	pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 	/*
 	 * Some Fresco Logic host controllers advertise MSI, but fail to
@@ -387,7 +381,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 
 	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
 		pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI)
-		xhci->quirks |= XHCI_BROKEN_D3COLD;
+		xhci->quirks |= XHCI_BROKEN_D3COLD_S2I;
 
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
 		xhci->quirks |= XHCI_LPM_SUPPORT;
@@ -485,10 +479,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 			pdev->device == 0x3432)
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
 
-	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
+	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483)
 		xhci->quirks |= XHCI_LPM_SUPPORT;
-		xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
-	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) {
@@ -527,6 +519,19 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	     pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4))
 		xhci->quirks |= XHCI_NO_SOFT_RETRY;
 
+	if (pdev->vendor == PCI_VENDOR_ID_ZHAOXIN) {
+		xhci->quirks |= XHCI_ZHAOXIN_HOST;
+		xhci->quirks |= XHCI_LPM_SUPPORT;
+
+		if (pdev->device == 0x9202) {
+			xhci->quirks |= XHCI_RESET_ON_RESUME;
+			xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH;
+		}
+
+		if (pdev->device == 0x9203)
+			xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH;
+	}
+
 	/* xHC spec requires PCI devices to support D3hot and D3cold */
 	if (xhci->hci_version >= 0x120)
 		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
@@ -801,9 +806,16 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	 * Systems with the TI redriver that loses port status change events
 	 * need to have the registers polled during D3, so avoid D3cold.
 	 */
-	if (xhci->quirks & (XHCI_COMP_MODE_QUIRK | XHCI_BROKEN_D3COLD))
+	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
 		pci_d3cold_disable(pdev);
 
+#ifdef CONFIG_SUSPEND
+	/* d3cold is broken, but only when s2idle is used */
+	if (pm_suspend_target_state == PM_SUSPEND_TO_IDLE &&
+	    xhci->quirks & (XHCI_BROKEN_D3COLD_S2I))
+		pci_d3cold_disable(pdev);
+#endif
+
 	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
 		xhci_pme_quirk(hcd);
 
@@ -824,7 +836,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	return ret;
 }
 
-static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
+static int xhci_pci_resume(struct usb_hcd *hcd, pm_message_t msg)
 {
 	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
@@ -859,7 +871,7 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
 		xhci_pme_quirk(hcd);
 
-	retval = xhci_resume(xhci, hibernated);
+	retval = xhci_resume(xhci, msg);
 	return retval;
 }