diff options
Diffstat (limited to 'drivers/usb/host/xhci-hub.c')
| -rw-r--r-- | drivers/usb/host/xhci-hub.c | 72 |
1 files changed, 62 insertions, 10 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index af92b2576fe9..f37316d2c8fa 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -567,6 +567,7 @@ struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd) */ static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index, bool on, unsigned long *flags) + __must_hold(&xhci->lock) { struct xhci_hub *rhub; struct xhci_port *port; @@ -617,6 +618,7 @@ static void xhci_port_set_test_mode(struct xhci_hcd *xhci, static int xhci_enter_test_mode(struct xhci_hcd *xhci, u16 test_mode, u16 wIndex, unsigned long *flags) + __must_hold(&xhci->lock) { int i, retval; @@ -1306,7 +1308,47 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, wIndex, link_state); goto error; } + + /* + * set link to U0, steps depend on current link state. + * U3: set link to U0 and wait for u3exit completion. + * U1/U2: no PLC complete event, only set link to U0. + * Resume/Recovery: device initiated U0, only wait for + * completion + */ + if (link_state == USB_SS_PORT_LS_U0) { + u32 pls = temp & PORT_PLS_MASK; + bool wait_u0 = false; + + /* already in U0 */ + if (pls == XDEV_U0) + break; + if (pls == XDEV_U3 || + pls == XDEV_RESUME || + pls == XDEV_RECOVERY) { + wait_u0 = true; + reinit_completion(&bus_state->u3exit_done[wIndex]); + } + if (pls <= XDEV_U3) /* U1, U2, U3 */ + xhci_set_link_state(xhci, ports[wIndex], + USB_SS_PORT_LS_U0); + if (!wait_u0) { + if (pls > XDEV_U3) + goto error; + break; + } + spin_unlock_irqrestore(&xhci->lock, flags); + if (!wait_for_completion_timeout(&bus_state->u3exit_done[wIndex], + msecs_to_jiffies(100))) + xhci_dbg(xhci, "missing U0 port change event for port %d\n", + wIndex); + spin_lock_irqsave(&xhci->lock, flags); + temp = readl(ports[wIndex]->addr); + break; + } + if (link_state == USB_SS_PORT_LS_U3) { + int retries = 16; slot_id = xhci_find_slot_id_by_port(hcd, xhci, wIndex + 1); if (slot_id) { @@ -1317,17 +1359,18 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_stop_device(xhci, slot_id, 1); spin_lock_irqsave(&xhci->lock, flags); } - } - - xhci_set_link_state(xhci, ports[wIndex], link_state); - - spin_unlock_irqrestore(&xhci->lock, flags); - msleep(20); /* wait device to enter */ - spin_lock_irqsave(&xhci->lock, flags); - - temp = readl(ports[wIndex]->addr); - if (link_state == USB_SS_PORT_LS_U3) + xhci_set_link_state(xhci, ports[wIndex], USB_SS_PORT_LS_U3); + spin_unlock_irqrestore(&xhci->lock, flags); + while (retries--) { + usleep_range(4000, 8000); + temp = readl(ports[wIndex]->addr); + if ((temp & PORT_PLS_MASK) == XDEV_U3) + break; + } + spin_lock_irqsave(&xhci->lock, flags); + temp = readl(ports[wIndex]->addr); bus_state->suspended_ports |= 1 << wIndex; + } break; case USB_PORT_FEAT_POWER: /* @@ -1528,6 +1571,8 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) } if ((temp & PORT_RC)) reset_change = true; + if (temp & PORT_OC) + status = 1; } if (!status && !reset_change) { xhci_dbg(xhci, "%s: stopping port polling.\n", __func__); @@ -1593,6 +1638,13 @@ retry: port_index); goto retry; } + /* bail out if port detected a over-current condition */ + if (t1 & PORT_OC) { + bus_state->bus_suspended = 0; + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "Bus suspend bailout, port over-current detected\n"); + return -EBUSY; + } /* suspend ports in U0, or bail out for new connect changes */ if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) { if ((t1 & PORT_CSC) && wake_enabled) { |