diff options
Diffstat (limited to 'drivers/usb/dwc3')
| -rw-r--r-- | drivers/usb/dwc3/core.c | 23 | ||||
| -rw-r--r-- | drivers/usb/dwc3/core.h | 2 | ||||
| -rw-r--r-- | drivers/usb/dwc3/dwc3-omap.c | 4 | ||||
| -rw-r--r-- | drivers/usb/dwc3/dwc3-st.c | 16 | ||||
| -rw-r--r-- | drivers/usb/dwc3/dwc3-xilinx.c | 7 | ||||
| -rw-r--r-- | drivers/usb/dwc3/ep0.c | 3 | ||||
| -rw-r--r-- | drivers/usb/dwc3/gadget.c | 41 |
7 files changed, 60 insertions, 36 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 734de2a8bd21..9eb085f359ce 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -564,9 +564,17 @@ int dwc3_event_buffers_setup(struct dwc3 *dwc) void dwc3_event_buffers_cleanup(struct dwc3 *dwc) { struct dwc3_event_buffer *evt; + u32 reg; if (!dwc->ev_buf) return; + /* + * Exynos platforms may not be able to access event buffer if the + * controller failed to halt on dwc3_core_exit(). + */ + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + if (!(reg & DWC3_DSTS_DEVCTRLHLT)) + return; evt = dwc->ev_buf; @@ -1379,6 +1387,21 @@ static int dwc3_core_init(struct dwc3 *dwc) } /* + * STAR 9001285599: This issue affects DWC_usb3 version 3.20a + * only. If the PM TIMER ECM is enabled through GUCTL2[19], the + * link compliance test (TD7.21) may fail. If the ECN is not + * enabled (GUCTL2[19] = 0), the controller will use the old timer + * value (5us), which is still acceptable for the link compliance + * test. Therefore, do not enable PM TIMER ECM in 3.20a by + * setting GUCTL2[19] by default; instead, use GUCTL2[19] = 0. + */ + if (DWC3_VER_IS(DWC3, 320A)) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL2); + reg &= ~DWC3_GUCTL2_LC_TIMER; + dwc3_writel(dwc->regs, DWC3_GUCTL2, reg); + } + + /* * When configured in HOST mode, after issuing U3/L2 exit controller * fails to send proper CRC checksum in CRC5 feild. Because of this * behaviour Transaction Error is generated, resulting in reset and diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 1e561fd8b86e..c71240e8f7c7 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -421,6 +421,7 @@ /* Global User Control Register 2 */ #define DWC3_GUCTL2_RST_ACTBITLATER BIT(14) +#define DWC3_GUCTL2_LC_TIMER BIT(19) /* Global User Control Register 3 */ #define DWC3_GUCTL3_SPLITDISABLE BIT(14) @@ -1269,6 +1270,7 @@ struct dwc3 { #define DWC3_REVISION_290A 0x5533290a #define DWC3_REVISION_300A 0x5533300a #define DWC3_REVISION_310A 0x5533310a +#define DWC3_REVISION_320A 0x5533320a #define DWC3_REVISION_330A 0x5533330a #define DWC31_REVISION_ANY 0x0 diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index d5c77db4daa9..2a11fc0ee84f 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -522,11 +522,13 @@ static int dwc3_omap_probe(struct platform_device *pdev) if (ret) { dev_err(dev, "failed to request IRQ #%d --> %d\n", omap->irq, ret); - goto err1; + goto err2; } dwc3_omap_enable_irqs(omap); return 0; +err2: + of_platform_depopulate(dev); err1: pm_runtime_put_sync(dev); pm_runtime_disable(dev); diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index 211360eee95a..c8c7cd0c1796 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -219,10 +219,8 @@ static int st_dwc3_probe(struct platform_device *pdev) dwc3_data->regmap = regmap; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "syscfg-reg"); - if (!res) { - ret = -ENXIO; - goto undo_platform_dev_alloc; - } + if (!res) + return -ENXIO; dwc3_data->syscfg_reg_off = res->start; @@ -233,8 +231,7 @@ static int st_dwc3_probe(struct platform_device *pdev) devm_reset_control_get_exclusive(dev, "powerdown"); if (IS_ERR(dwc3_data->rstc_pwrdn)) { dev_err(&pdev->dev, "could not get power controller\n"); - ret = PTR_ERR(dwc3_data->rstc_pwrdn); - goto undo_platform_dev_alloc; + return PTR_ERR(dwc3_data->rstc_pwrdn); } /* Manage PowerDown */ @@ -269,7 +266,7 @@ static int st_dwc3_probe(struct platform_device *pdev) if (!child_pdev) { dev_err(dev, "failed to find dwc3 core device\n"); ret = -ENODEV; - goto err_node_put; + goto depopulate; } dwc3_data->dr_mode = usb_get_dr_mode(&child_pdev->dev); @@ -285,6 +282,7 @@ static int st_dwc3_probe(struct platform_device *pdev) ret = st_dwc3_drd_init(dwc3_data); if (ret) { dev_err(dev, "drd initialisation failed\n"); + of_platform_depopulate(dev); goto undo_softreset; } @@ -294,14 +292,14 @@ static int st_dwc3_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dwc3_data); return 0; +depopulate: + of_platform_depopulate(dev); err_node_put: of_node_put(child); undo_softreset: reset_control_assert(dwc3_data->rstc_rst); undo_powerdown: reset_control_assert(dwc3_data->rstc_pwrdn); -undo_platform_dev_alloc: - platform_device_put(pdev); return ret; } diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c index bb4d894c16e9..f1298b1b4f84 100644 --- a/drivers/usb/dwc3/dwc3-xilinx.c +++ b/drivers/usb/dwc3/dwc3-xilinx.c @@ -327,9 +327,14 @@ static int dwc3_xlnx_probe(struct platform_device *pdev) goto err_pm_set_suspended; pm_suspend_ignore_children(dev, false); - return pm_runtime_resume_and_get(dev); + ret = pm_runtime_resume_and_get(dev); + if (ret < 0) + goto err_pm_set_suspended; + + return 0; err_pm_set_suspended: + of_platform_depopulate(dev); pm_runtime_set_suspended(dev); err_clk_put: diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index d96ffbe52039..c9533a99e47c 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -232,7 +232,8 @@ void dwc3_ep0_stall_and_restart(struct dwc3 *dwc) /* stall is always issued on EP0 */ dep = dwc->eps[0]; __dwc3_gadget_ep_set_halt(dep, 1, false); - dep->flags = DWC3_EP_ENABLED; + dep->flags &= DWC3_EP_RESOURCE_ALLOCATED; + dep->flags |= DWC3_EP_ENABLED; dwc->delayed_status = false; if (!list_empty(&dep->pending_list)) { diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 89fc690fdf34..291bc549935b 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -287,6 +287,23 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc, bool async); * * Caller should handle locking. This function will issue @cmd with given * @params to @dep and wait for its completion. + * + * According to the programming guide, if the link state is in L1/L2/U3, + * then sending the Start Transfer command may not complete. The + * programming guide suggested to bring the link state back to ON/U0 by + * performing remote wakeup prior to sending the command. However, don't + * initiate remote wakeup when the user/function does not send wakeup + * request via wakeup ops. Send the command when it's allowed. + * + * Notes: + * For L1 link state, issuing a command requires the clearing of + * GUSB2PHYCFG.SUSPENDUSB2, which turns on the signal required to complete + * the given command (usually within 50us). This should happen within the + * command timeout set by driver. No additional step is needed. + * + * For L2 or U3 link state, the gadget is in USB suspend. Care should be + * taken when sending Start Transfer command to ensure that it's done after + * USB resume. */ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, struct dwc3_gadget_ep_cmd_params *params) @@ -327,30 +344,6 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); } - if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_STARTTRANSFER) { - int link_state; - - /* - * Initiate remote wakeup if the link state is in U3 when - * operating in SS/SSP or L1/L2 when operating in HS/FS. If the - * link state is in U1/U2, no remote wakeup is needed. The Start - * Transfer command will initiate the link recovery. - */ - link_state = dwc3_gadget_get_link_state(dwc); - switch (link_state) { - case DWC3_LINK_STATE_U2: - if (dwc->gadget->speed >= USB_SPEED_SUPER) - break; - - fallthrough; - case DWC3_LINK_STATE_U3: - ret = __dwc3_gadget_wakeup(dwc, false); - dev_WARN_ONCE(dwc->dev, ret, "wakeup failed --> %d\n", - ret); - break; - } - } - /* * For some commands such as Update Transfer command, DEPCMDPARn * registers are reserved. Since the driver often sends Update Transfer |