aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/dwc3
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/dwc3')
-rw-r--r--drivers/usb/dwc3/core.c59
-rw-r--r--drivers/usb/dwc3/drd.c50
-rw-r--r--drivers/usb/dwc3/dwc3-exynos.c11
-rw-r--r--drivers/usb/dwc3/dwc3-st.c2
-rw-r--r--drivers/usb/dwc3/gadget.c37
-rw-r--r--drivers/usb/dwc3/host.c10
6 files changed, 86 insertions, 83 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index ea51624461b5..1f348bc867c2 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -23,6 +23,7 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/of.h>
+#include <linux/of_graph.h>
#include <linux/acpi.h>
#include <linux/pinctrl/consumer.h>
#include <linux/reset.h>
@@ -85,7 +86,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc)
* mode. If the controller supports DRD but the dr_mode is not
* specified or set to OTG, then set the mode to peripheral.
*/
- if (mode == USB_DR_MODE_OTG &&
+ if (mode == USB_DR_MODE_OTG && !dwc->edev &&
(!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
!device_property_read_bool(dwc->dev, "usb-role-switch")) &&
!DWC3_VER_IS_PRIOR(DWC3, 330A))
@@ -1690,6 +1691,56 @@ static void dwc3_check_params(struct dwc3 *dwc)
}
}
+static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
+{
+ struct device *dev = dwc->dev;
+ struct device_node *np_phy;
+ struct extcon_dev *edev = NULL;
+ const char *name;
+
+ if (device_property_read_bool(dev, "extcon"))
+ return extcon_get_edev_by_phandle(dev, 0);
+
+ /*
+ * Device tree platforms should get extcon via phandle.
+ * On ACPI platforms, we get the name from a device property.
+ * This device property is for kernel internal use only and
+ * is expected to be set by the glue code.
+ */
+ if (device_property_read_string(dev, "linux,extcon-name", &name) == 0)
+ return extcon_get_extcon_dev(name);
+
+ /*
+ * Check explicitly if "usb-role-switch" is used since
+ * extcon_find_edev_by_node() can not be used to check the absence of
+ * an extcon device. In the absence of an device it will always return
+ * EPROBE_DEFER.
+ */
+ if (IS_ENABLED(CONFIG_USB_ROLE_SWITCH) &&
+ device_property_read_bool(dev, "usb-role-switch"))
+ return NULL;
+
+ /*
+ * Try to get an extcon device from the USB PHY controller's "port"
+ * node. Check if it has the "port" node first, to avoid printing the
+ * error message from underlying code, as it's a valid case: extcon
+ * device (and "port" node) may be missing in case of "usb-role-switch"
+ * or OTG mode.
+ */
+ np_phy = of_parse_phandle(dev->of_node, "phys", 0);
+ if (of_graph_is_present(np_phy)) {
+ struct device_node *np_conn;
+
+ np_conn = of_graph_get_remote_node(np_phy, -1, -1);
+ if (np_conn)
+ edev = extcon_find_edev_by_node(np_conn);
+ of_node_put(np_conn);
+ }
+ of_node_put(np_phy);
+
+ return edev;
+}
+
static int dwc3_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1840,6 +1891,12 @@ static int dwc3_probe(struct platform_device *pdev)
goto err2;
}
+ dwc->edev = dwc3_get_extcon(dwc);
+ if (IS_ERR(dwc->edev)) {
+ ret = dev_err_probe(dwc->dev, PTR_ERR(dwc->edev), "failed to get extcon\n");
+ goto err3;
+ }
+
ret = dwc3_get_dr_mode(dwc);
if (ret)
goto err3;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 8cad9e7d3368..039bf241769a 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -8,7 +8,6 @@
*/
#include <linux/extcon.h>
-#include <linux/of_graph.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/property.h>
@@ -439,51 +438,6 @@ static int dwc3_drd_notifier(struct notifier_block *nb,
return NOTIFY_DONE;
}
-static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
-{
- struct device *dev = dwc->dev;
- struct device_node *np_phy;
- struct extcon_dev *edev = NULL;
- const char *name;
-
- if (device_property_read_bool(dev, "extcon"))
- return extcon_get_edev_by_phandle(dev, 0);
-
- /*
- * Device tree platforms should get extcon via phandle.
- * On ACPI platforms, we get the name from a device property.
- * This device property is for kernel internal use only and
- * is expected to be set by the glue code.
- */
- if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
- edev = extcon_get_extcon_dev(name);
- if (!edev)
- return ERR_PTR(-EPROBE_DEFER);
-
- return edev;
- }
-
- /*
- * Try to get an extcon device from the USB PHY controller's "port"
- * node. Check if it has the "port" node first, to avoid printing the
- * error message from underlying code, as it's a valid case: extcon
- * device (and "port" node) may be missing in case of "usb-role-switch"
- * or OTG mode.
- */
- np_phy = of_parse_phandle(dev->of_node, "phys", 0);
- if (of_graph_is_present(np_phy)) {
- struct device_node *np_conn;
-
- np_conn = of_graph_get_remote_node(np_phy, -1, -1);
- if (np_conn)
- edev = extcon_find_edev_by_node(np_conn);
- of_node_put(np_conn);
- }
- of_node_put(np_phy);
-
- return edev;
-}
-
#if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
#define ROLE_SWITCH 1
static int dwc3_usb_role_switch_set(struct usb_role_switch *sw,
@@ -588,10 +542,6 @@ int dwc3_drd_init(struct dwc3 *dwc)
device_property_read_bool(dwc->dev, "usb-role-switch"))
return dwc3_setup_role_switch(dwc);
- dwc->edev = dwc3_get_extcon(dwc);
- if (IS_ERR(dwc->edev))
- return PTR_ERR(dwc->edev);
-
if (dwc->edev) {
dwc->edev_nb.notifier_call = dwc3_drd_notifier;
ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index 0ecf20eeceee..4be6a873bd07 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -37,15 +37,6 @@ struct dwc3_exynos {
struct regulator *vdd10;
};
-static int dwc3_exynos_remove_child(struct device *dev, void *unused)
-{
- struct platform_device *pdev = to_platform_device(dev);
-
- platform_device_unregister(pdev);
-
- return 0;
-}
-
static int dwc3_exynos_probe(struct platform_device *pdev)
{
struct dwc3_exynos *exynos;
@@ -142,7 +133,7 @@ static int dwc3_exynos_remove(struct platform_device *pdev)
struct dwc3_exynos *exynos = platform_get_drvdata(pdev);
int i;
- device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child);
+ of_platform_depopulate(&pdev->dev);
for (i = exynos->num_clks - 1; i >= 0; i--)
clk_disable_unprepare(exynos->clks[i]);
diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c
index 6c14a79279f9..fea5290de83f 100644
--- a/drivers/usb/dwc3/dwc3-st.c
+++ b/drivers/usb/dwc3/dwc3-st.c
@@ -251,7 +251,7 @@ static int st_dwc3_probe(struct platform_device *pdev)
/* Manage SoftReset */
reset_control_deassert(dwc3_data->rstc_rst);
- child = of_get_child_by_name(node, "usb");
+ child = of_get_compatible_child(node, "snps,dwc3");
if (!child) {
dev_err(&pdev->dev, "failed to find dwc3 core node\n");
ret = -ENODEV;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 079cd333632e..6d524fa76443 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -291,7 +291,8 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
*
* DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section 3.2.2
*/
- if (dwc->gadget->speed <= USB_SPEED_HIGH) {
+ if (dwc->gadget->speed <= USB_SPEED_HIGH ||
+ DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_ENDTRANSFER) {
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
saved_config |= DWC3_GUSB2PHYCFG_SUSPHY;
@@ -1023,13 +1024,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
reg &= ~DWC3_DALEPENA_EP(dep->number);
dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
- /* Clear out the ep descriptors for non-ep0 */
- if (dep->number > 1) {
- dep->endpoint.comp_desc = NULL;
- dep->endpoint.desc = NULL;
- }
-
- dwc3_remove_requests(dwc, dep, -ECONNRESET);
+ dwc3_remove_requests(dwc, dep, -ESHUTDOWN);
dep->stream_capable = false;
dep->type = 0;
@@ -1043,6 +1038,12 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
mask |= (DWC3_EP_DELAY_STOP | DWC3_EP_TRANSFER_STARTED);
dep->flags &= mask;
+ /* Clear out the ep descriptors for non-ep0 */
+ if (dep->number > 1) {
+ dep->endpoint.comp_desc = NULL;
+ dep->endpoint.desc = NULL;
+ }
+
return 0;
}
@@ -1292,8 +1293,8 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS;
}
- /* always enable Interrupt on Missed ISOC */
- trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
+ if (!no_interrupt && !chain)
+ trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
break;
case USB_ENDPOINT_XFER_BULK:
@@ -1698,6 +1699,16 @@ static int __dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool int
cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
memset(&params, 0, sizeof(params));
ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
+ /*
+ * If the End Transfer command was timed out while the device is
+ * not in SETUP phase, it's possible that an incoming Setup packet
+ * may prevent the command's completion. Let's retry when the
+ * ep0state returns to EP0_SETUP_PHASE.
+ */
+ if (ret == -ETIMEDOUT && dep->dwc->ep0state != EP0_SETUP_PHASE) {
+ dep->flags |= DWC3_EP_DELAY_STOP;
+ return 0;
+ }
WARN_ON_ONCE(ret);
dep->resource_index = 0;
@@ -3238,6 +3249,10 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep,
if (event->status & DEPEVT_STATUS_SHORT && !chain)
return 1;
+ if ((trb->ctrl & DWC3_TRB_CTRL_ISP_IMI) &&
+ DWC3_TRB_SIZE_TRBSTS(trb->size) == DWC3_TRBSTS_MISSED_ISOC)
+ return 1;
+
if ((trb->ctrl & DWC3_TRB_CTRL_IOC) ||
(trb->ctrl & DWC3_TRB_CTRL_LST))
return 1;
@@ -3719,7 +3734,7 @@ void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
* timeout. Delay issuing the End Transfer command until the Setup TRB is
* prepared.
*/
- if (dwc->ep0state != EP0_SETUP_PHASE) {
+ if (dwc->ep0state != EP0_SETUP_PHASE && !dwc->delayed_status) {
dep->flags |= DWC3_EP_DELAY_STOP;
return;
}
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index a7154fe8206d..f6f13e7f1ba1 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -11,13 +11,8 @@
#include <linux/of.h>
#include <linux/platform_device.h>
-#include "../host/xhci-plat.h"
#include "core.h"
-static const struct xhci_plat_priv dwc3_xhci_plat_priv = {
- .quirks = XHCI_SKIP_PHY_INIT,
-};
-
static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
int irq, char *name)
{
@@ -97,11 +92,6 @@ int dwc3_host_init(struct dwc3 *dwc)
goto err;
}
- ret = platform_device_add_data(xhci, &dwc3_xhci_plat_priv,
- sizeof(dwc3_xhci_plat_priv));
- if (ret)
- goto err;
-
memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
if (dwc->usb3_lpm_capable)
Powered by cgit, Gruvboxed by Blaster4385.