diff options
Diffstat (limited to 'drivers/usb/dwc3/core.c')
| -rw-r--r-- | drivers/usb/dwc3/core.c | 141 |
1 files changed, 131 insertions, 10 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index ea91310113b9..88c80fcc39f5 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -78,6 +78,14 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) mode = USB_DR_MODE_HOST; else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) mode = USB_DR_MODE_PERIPHERAL; + + /* + * dwc_usb31 does not support OTG mode. If the controller + * supports DRD but the dr_mode is not specified or set to OTG, + * then set the mode to peripheral. + */ + if (mode == USB_DR_MODE_OTG && dwc3_is_usb31(dwc)) + mode = USB_DR_MODE_PERIPHERAL; } if (mode != dwc->dr_mode) { @@ -778,6 +786,98 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc) static int dwc3_core_get_phy(struct dwc3 *dwc); static int dwc3_core_ulpi_init(struct dwc3 *dwc); +/* set global incr burst type configuration registers */ +static void dwc3_set_incr_burst_type(struct dwc3 *dwc) +{ + struct device *dev = dwc->dev; + /* incrx_mode : for INCR burst type. */ + bool incrx_mode; + /* incrx_size : for size of INCRX burst. */ + u32 incrx_size; + u32 *vals; + u32 cfg; + int ntype; + int ret; + int i; + + cfg = dwc3_readl(dwc->regs, DWC3_GSBUSCFG0); + + /* + * Handle property "snps,incr-burst-type-adjustment". + * Get the number of value from this property: + * result <= 0, means this property is not supported. + * result = 1, means INCRx burst mode supported. + * result > 1, means undefined length burst mode supported. + */ + ntype = device_property_read_u32_array(dev, + "snps,incr-burst-type-adjustment", NULL, 0); + if (ntype <= 0) + return; + + vals = kcalloc(ntype, sizeof(u32), GFP_KERNEL); + if (!vals) { + dev_err(dev, "Error to get memory\n"); + return; + } + + /* Get INCR burst type, and parse it */ + ret = device_property_read_u32_array(dev, + "snps,incr-burst-type-adjustment", vals, ntype); + if (ret) { + dev_err(dev, "Error to get property\n"); + return; + } + + incrx_size = *vals; + + if (ntype > 1) { + /* INCRX (undefined length) burst mode */ + incrx_mode = INCRX_UNDEF_LENGTH_BURST_MODE; + for (i = 1; i < ntype; i++) { + if (vals[i] > incrx_size) + incrx_size = vals[i]; + } + } else { + /* INCRX burst mode */ + incrx_mode = INCRX_BURST_MODE; + } + + /* Enable Undefined Length INCR Burst and Enable INCRx Burst */ + cfg &= ~DWC3_GSBUSCFG0_INCRBRST_MASK; + if (incrx_mode) + cfg |= DWC3_GSBUSCFG0_INCRBRSTENA; + switch (incrx_size) { + case 256: + cfg |= DWC3_GSBUSCFG0_INCR256BRSTENA; + break; + case 128: + cfg |= DWC3_GSBUSCFG0_INCR128BRSTENA; + break; + case 64: + cfg |= DWC3_GSBUSCFG0_INCR64BRSTENA; + break; + case 32: + cfg |= DWC3_GSBUSCFG0_INCR32BRSTENA; + break; + case 16: + cfg |= DWC3_GSBUSCFG0_INCR16BRSTENA; + break; + case 8: + cfg |= DWC3_GSBUSCFG0_INCR8BRSTENA; + break; + case 4: + cfg |= DWC3_GSBUSCFG0_INCR4BRSTENA; + break; + case 1: + break; + default: + dev_err(dev, "Invalid property\n"); + break; + } + + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, cfg); +} + /** * dwc3_core_init - Low-level initialization of DWC3 Core * @dwc: Pointer to our controller context structure @@ -840,6 +940,8 @@ static int dwc3_core_init(struct dwc3 *dwc) /* Adjust Frame Length */ dwc3_frame_length_adjustment(dwc); + dwc3_set_incr_burst_type(dwc); + usb_phy_set_suspend(dwc->usb2_phy, 0); usb_phy_set_suspend(dwc->usb3_phy, 0); ret = phy_power_on(dwc->usb2_generic_phy); @@ -883,6 +985,22 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); } + if (dwc->dr_mode == USB_DR_MODE_HOST || + dwc->dr_mode == USB_DR_MODE_OTG) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL); + + /* + * Enable Auto retry Feature to make the controller operating in + * Host mode on seeing transaction errors(CRC errors or internal + * overrun scenerios) on IN transfers to reply to the device + * with a non-terminating retry ACK (i.e, an ACK transcation + * packet with Retry=1 & Nump != 0) + */ + reg |= DWC3_GUCTL_HSTINAUTORETRY; + + dwc3_writel(dwc->regs, DWC3_GUCTL, reg); + } + /* * Must config both number of packets and max burst settings to enable * RX and/or TX threshold. @@ -1272,7 +1390,6 @@ static int dwc3_probe(struct platform_device *pdev) if (!dwc->clks) return -ENOMEM; - dwc->num_clks = ARRAY_SIZE(dwc3_core_clks); dwc->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1307,15 +1424,19 @@ static int dwc3_probe(struct platform_device *pdev) if (IS_ERR(dwc->reset)) return PTR_ERR(dwc->reset); - ret = clk_bulk_get(dev, dwc->num_clks, dwc->clks); - if (ret == -EPROBE_DEFER) - return ret; - /* - * Clocks are optional, but new DT platforms should support all clocks - * as required by the DT-binding. - */ - if (ret) - dwc->num_clks = 0; + if (dev->of_node) { + dwc->num_clks = ARRAY_SIZE(dwc3_core_clks); + + ret = clk_bulk_get(dev, dwc->num_clks, dwc->clks); + if (ret == -EPROBE_DEFER) + return ret; + /* + * Clocks are optional, but new DT platforms should support all + * clocks as required by the DT-binding. + */ + if (ret) + dwc->num_clks = 0; + } ret = reset_control_deassert(dwc->reset); if (ret) |