1 files changed, 125 insertions, 39 deletions

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 369bab16a824..03474d3575ab 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -100,7 +100,10 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc)
 	return 0;
 }
 
-void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
+static void dwc3_event_buffers_cleanup(struct dwc3 *dwc);
+static int dwc3_event_buffers_setup(struct dwc3 *dwc);
+
+static void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
 {
 	u32 reg;
 
@@ -110,6 +113,82 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 }
 
+static void __dwc3_set_mode(struct work_struct *work)
+{
+	struct dwc3 *dwc = work_to_dwc(work);
+	unsigned long flags;
+	int ret;
+
+	if (!dwc->desired_dr_role)
+		return;
+
+	if (dwc->desired_dr_role == dwc->current_dr_role)
+		return;
+
+	if (dwc->dr_mode != USB_DR_MODE_OTG)
+		return;
+
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_HOST:
+		dwc3_host_exit(dwc);
+		break;
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		dwc3_gadget_exit(dwc);
+		dwc3_event_buffers_cleanup(dwc);
+		break;
+	default:
+		break;
+	}
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	dwc3_set_prtcap(dwc, dwc->desired_dr_role);
+
+	dwc->current_dr_role = dwc->desired_dr_role;
+
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	switch (dwc->desired_dr_role) {
+	case DWC3_GCTL_PRTCAP_HOST:
+		ret = dwc3_host_init(dwc);
+		if (ret) {
+			dev_err(dwc->dev, "failed to initialize host\n");
+		} else {
+			if (dwc->usb2_phy)
+				otg_set_vbus(dwc->usb2_phy->otg, true);
+			if (dwc->usb2_generic_phy)
+				phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
+
+		}
+		break;
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		dwc3_event_buffers_setup(dwc);
+
+		if (dwc->usb2_phy)
+			otg_set_vbus(dwc->usb2_phy->otg, false);
+		if (dwc->usb2_generic_phy)
+			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
+
+		ret = dwc3_gadget_init(dwc);
+		if (ret)
+			dev_err(dwc->dev, "failed to initialize peripheral\n");
+		break;
+	default:
+		break;
+	}
+}
+
+void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc->desired_dr_role = mode;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	queue_work(system_power_efficient_wq, &dwc->drd_work);
+}
+
 u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type)
 {
 	struct dwc3		*dwc = dep->dwc;
@@ -397,8 +476,7 @@ static void dwc3_core_num_eps(struct dwc3 *dwc)
 {
 	struct dwc3_hwparams	*parms = &dwc->hwparams;
 
-	dwc->num_in_eps = DWC3_NUM_IN_EPS(parms);
-	dwc->num_out_eps = DWC3_NUM_EPS(parms) - dwc->num_in_eps;
+	dwc->num_eps = DWC3_NUM_EPS(parms);
 }
 
 static void dwc3_cache_hwparams(struct dwc3 *dwc)
@@ -432,6 +510,12 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
 
 	/*
+	 * Make sure UX_EXIT_PX is cleared as that causes issues with some
+	 * PHYs. Also, this bit is not supposed to be used in normal operation.
+	 */
+	reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX;
+
+	/*
 	 * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY
 	 * to '0' during coreConsultant configuration. So default value
 	 * will be '0' when the core is reset. Application needs to set it
@@ -650,6 +734,8 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc)
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 }
 
+static int dwc3_core_get_phy(struct dwc3 *dwc);
+
 /**
  * dwc3_core_init - Low-level initialization of DWC3 Core
  * @dwc: Pointer to our controller context structure
@@ -680,6 +766,10 @@ static int dwc3_core_init(struct dwc3 *dwc)
 			dwc->maximum_speed = USB_SPEED_HIGH;
 	}
 
+	ret = dwc3_core_get_phy(dwc);
+	if (ret)
+		goto err0;
+
 	ret = dwc3_core_soft_reset(dwc);
 	if (ret)
 		goto err0;
@@ -714,21 +804,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		goto err4;
 	}
 
-	switch (dwc->dr_mode) {
-	case USB_DR_MODE_PERIPHERAL:
-		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
-		break;
-	case USB_DR_MODE_HOST:
-		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
-		break;
-	case USB_DR_MODE_OTG:
-		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
-		break;
-	default:
-		dev_warn(dwc->dev, "Unsupported mode %d\n", dwc->dr_mode);
-		break;
-	}
-
 	/*
 	 * ENDXFER polling is available on version 3.10a and later of
 	 * the DWC_usb3 controller. It is NOT available in the
@@ -740,13 +815,19 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		dwc3_writel(dwc->regs, DWC3_GUCTL2, reg);
 	}
 
-	/*
-	 * Enable hardware control of sending remote wakeup in HS when
-	 * the device is in the L1 state.
-	 */
-	if (dwc->revision >= DWC3_REVISION_290A) {
+	if (dwc->revision >= DWC3_REVISION_250A) {
 		reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
-		reg |= DWC3_GUCTL1_DEV_L1_EXIT_BY_HW;
+
+		/*
+		 * Enable hardware control of sending remote wakeup
+		 * in HS when the device is in the L1 state.
+		 */
+		if (dwc->revision >= DWC3_REVISION_290A)
+			reg |= DWC3_GUCTL1_DEV_L1_EXIT_BY_HW;
+
+		if (dwc->dis_tx_ipgap_linecheck_quirk)
+			reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS;
+
 		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
 	}
 
@@ -846,6 +927,13 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 
 	switch (dwc->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
+		dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+
+		if (dwc->usb2_phy)
+			otg_set_vbus(dwc->usb2_phy->otg, false);
+		if (dwc->usb2_generic_phy)
+			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
+
 		ret = dwc3_gadget_init(dwc);
 		if (ret) {
 			if (ret != -EPROBE_DEFER)
@@ -854,6 +942,13 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 		}
 		break;
 	case USB_DR_MODE_HOST:
+		dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
+
+		if (dwc->usb2_phy)
+			otg_set_vbus(dwc->usb2_phy->otg, true);
+		if (dwc->usb2_generic_phy)
+			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
+
 		ret = dwc3_host_init(dwc);
 		if (ret) {
 			if (ret != -EPROBE_DEFER)
@@ -862,17 +957,11 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 		}
 		break;
 	case USB_DR_MODE_OTG:
-		ret = dwc3_host_init(dwc);
-		if (ret) {
-			if (ret != -EPROBE_DEFER)
-				dev_err(dev, "failed to initialize host\n");
-			return ret;
-		}
-
-		ret = dwc3_gadget_init(dwc);
+		INIT_WORK(&dwc->drd_work, __dwc3_set_mode);
+		ret = dwc3_drd_init(dwc);
 		if (ret) {
 			if (ret != -EPROBE_DEFER)
-				dev_err(dev, "failed to initialize gadget\n");
+				dev_err(dev, "failed to initialize dual-role\n");
 			return ret;
 		}
 		break;
@@ -894,8 +983,7 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc)
 		dwc3_host_exit(dwc);
 		break;
 	case USB_DR_MODE_OTG:
-		dwc3_host_exit(dwc);
-		dwc3_gadget_exit(dwc);
+		dwc3_drd_exit(dwc);
 		break;
 	default:
 		/* do nothing */
@@ -972,6 +1060,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 				"snps,dis-u2-freeclk-exists-quirk");
 	dwc->dis_del_phy_power_chg_quirk = device_property_read_bool(dev,
 				"snps,dis-del-phy-power-chg-quirk");
+	dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev,
+				"snps,dis-tx-ipgap-linecheck-quirk");
 
 	dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
 				"snps,tx_de_emphasis_quirk");
@@ -1097,10 +1187,6 @@ static int dwc3_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, dwc);
 	dwc3_cache_hwparams(dwc);
 
-	ret = dwc3_core_get_phy(dwc);
-	if (ret)
-		goto err0;
-
 	spin_lock_init(&dwc->lock);
 
 	pm_runtime_set_active(dev);