diff options
Diffstat (limited to 'drivers/usb/core')
| -rw-r--r-- | drivers/usb/core/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/usb/core/config.c | 3 | ||||
| -rw-r--r-- | drivers/usb/core/devices.c | 26 | ||||
| -rw-r--r-- | drivers/usb/core/devio.c | 51 | ||||
| -rw-r--r-- | drivers/usb/core/hcd.c | 4 | ||||
| -rw-r--r-- | drivers/usb/core/hub.c | 112 | ||||
| -rw-r--r-- | drivers/usb/core/hub.h | 5 | ||||
| -rw-r--r-- | drivers/usb/core/port.c | 93 | ||||
| -rw-r--r-- | drivers/usb/core/quirks.c | 9 | ||||
| -rw-r--r-- | drivers/usb/core/sysfs.c | 31 | ||||
| -rw-r--r-- | drivers/usb/core/usb.c | 5 |
11 files changed, 242 insertions, 100 deletions
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index a99c89e78126..dd280108758f 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -77,8 +77,7 @@ config USB_OTG_BLACKLIST_HUB config USB_OTG_FSM tristate "USB 2.0 OTG FSM implementation" - depends on USB - select USB_OTG + depends on USB && USB_OTG select USB_PHY help Implements OTG Finite State Machine as specified in On-The-Go diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 7caff020106e..5050760f5e17 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -115,7 +115,8 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, USB_SS_MULT(desc->bmAttributes) > 3) { dev_warn(ddev, "Isoc endpoint has Mult of %d in " "config %d interface %d altsetting %d ep %d: " - "setting to 3\n", desc->bmAttributes + 1, + "setting to 3\n", + USB_SS_MULT(desc->bmAttributes), cfgno, inum, asnum, ep->desc.bEndpointAddress); ep->ss_ep_comp.bmAttributes = 2; } diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 2a3bbdf7eb94..cffa0a0d7de2 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -661,32 +661,8 @@ static unsigned int usb_device_poll(struct file *file, return 0; } -static loff_t usb_device_lseek(struct file *file, loff_t offset, int orig) -{ - loff_t ret; - - mutex_lock(&file_inode(file)->i_mutex); - - switch (orig) { - case 0: - file->f_pos = offset; - ret = file->f_pos; - break; - case 1: - file->f_pos += offset; - ret = file->f_pos; - break; - case 2: - default: - ret = -EINVAL; - } - - mutex_unlock(&file_inode(file)->i_mutex); - return ret; -} - const struct file_operations usbfs_devices_fops = { - .llseek = usb_device_lseek, + .llseek = no_seek_end_llseek, .read = usb_device_read, .poll = usb_device_poll, }; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 38ae877c46e3..59e7a3369084 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -100,6 +100,11 @@ static bool usbfs_snoop; module_param(usbfs_snoop, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic"); +static unsigned usbfs_snoop_max = 65536; +module_param(usbfs_snoop_max, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(usbfs_snoop_max, + "maximum number of bytes to print while snooping"); + #define snoop(dev, format, arg...) \ do { \ if (usbfs_snoop) \ @@ -157,30 +162,6 @@ static int connected(struct usb_dev_state *ps) ps->dev->state != USB_STATE_NOTATTACHED); } -static loff_t usbdev_lseek(struct file *file, loff_t offset, int orig) -{ - loff_t ret; - - mutex_lock(&file_inode(file)->i_mutex); - - switch (orig) { - case 0: - file->f_pos = offset; - ret = file->f_pos; - break; - case 1: - file->f_pos += offset; - ret = file->f_pos; - break; - case 2: - default: - ret = -EINVAL; - } - - mutex_unlock(&file_inode(file)->i_mutex); - return ret; -} - static ssize_t usbdev_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos) { @@ -392,6 +373,7 @@ static void snoop_urb(struct usb_device *udev, ep, t, d, length, timeout_or_status); } + data_len = min(data_len, usbfs_snoop_max); if (data && data_len > 0) { print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, 32, 1, data, data_len, 1); @@ -402,7 +384,8 @@ static void snoop_urb_data(struct urb *urb, unsigned len) { int i, size; - if (!usbfs_snoop) + len = min(len, usbfs_snoop_max); + if (!usbfs_snoop || len == 0) return; if (urb->num_sgs == 0) { @@ -1709,8 +1692,12 @@ static struct async *reap_as(struct usb_dev_state *ps) static int proc_reapurb(struct usb_dev_state *ps, void __user *arg) { struct async *as = reap_as(ps); + if (as) { - int retval = processcompl(as, (void __user * __user *)arg); + int retval; + + snoop(&ps->dev->dev, "reap %p\n", as->userurb); + retval = processcompl(as, (void __user * __user *)arg); free_async(as); return retval; } @@ -1726,6 +1713,7 @@ static int proc_reapurbnonblock(struct usb_dev_state *ps, void __user *arg) as = async_getcompleted(ps); if (as) { + snoop(&ps->dev->dev, "reap %p\n", as->userurb); retval = processcompl(as, (void __user * __user *)arg); free_async(as); } else { @@ -1852,8 +1840,12 @@ static int processcompl_compat(struct async *as, void __user * __user *arg) static int proc_reapurb_compat(struct usb_dev_state *ps, void __user *arg) { struct async *as = reap_as(ps); + if (as) { - int retval = processcompl_compat(as, (void __user * __user *)arg); + int retval; + + snoop(&ps->dev->dev, "reap %p\n", as->userurb); + retval = processcompl_compat(as, (void __user * __user *)arg); free_async(as); return retval; } @@ -1869,6 +1861,7 @@ static int proc_reapurbnonblock_compat(struct usb_dev_state *ps, void __user *ar as = async_getcompleted(ps); if (as) { + snoop(&ps->dev->dev, "reap %p\n", as->userurb); retval = processcompl_compat(as, (void __user * __user *)arg); free_async(as); } else { @@ -2273,7 +2266,7 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, #endif case USBDEVFS_DISCARDURB: - snoop(&dev->dev, "%s: DISCARDURB\n", __func__); + snoop(&dev->dev, "%s: DISCARDURB %p\n", __func__, p); ret = proc_unlinkurb(ps, p); break; @@ -2366,7 +2359,7 @@ static unsigned int usbdev_poll(struct file *file, const struct file_operations usbdev_file_operations = { .owner = THIS_MODULE, - .llseek = usbdev_lseek, + .llseek = no_seek_end_llseek, .read = usbdev_read, .poll = usbdev_poll, .unlocked_ioctl = usbdev_ioctl, diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 1c102d60cd9f..df0e3b92533a 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -3000,7 +3000,7 @@ EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown); #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE) -struct usb_mon_operations *mon_ops; +const struct usb_mon_operations *mon_ops; /* * The registration is unlocked. @@ -3010,7 +3010,7 @@ struct usb_mon_operations *mon_ops; * symbols from usbcore, usbcore gets referenced and cannot be unloaded first. */ -int usb_mon_register (struct usb_mon_operations *ops) +int usb_mon_register(const struct usb_mon_operations *ops) { if (mon_ops) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index bdeadc112d29..51b436918f78 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -124,6 +124,10 @@ struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev) int usb_device_supports_lpm(struct usb_device *udev) { + /* Some devices have trouble with LPM */ + if (udev->quirks & USB_QUIRK_NO_LPM) + return 0; + /* USB 2.1 (and greater) devices indicate LPM support through * their USB 2.0 Extended Capabilities BOS descriptor. */ @@ -1031,10 +1035,20 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) unsigned delay; /* Continue a partial initialization */ - if (type == HUB_INIT2) - goto init2; - if (type == HUB_INIT3) + if (type == HUB_INIT2 || type == HUB_INIT3) { + device_lock(hub->intfdev); + + /* Was the hub disconnected while we were waiting? */ + if (hub->disconnected) { + device_unlock(hub->intfdev); + kref_put(&hub->kref, hub_release); + return; + } + if (type == HUB_INIT2) + goto init2; goto init3; + } + kref_get(&hub->kref); /* The superspeed hub except for root hub has to use Hub Depth * value as an offset into the route string to locate the bits @@ -1232,6 +1246,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) queue_delayed_work(system_power_efficient_wq, &hub->init_work, msecs_to_jiffies(delay)); + device_unlock(hub->intfdev); return; /* Continues at init3: below */ } else { msleep(delay); @@ -1253,6 +1268,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* Allow autosuspend if it was suppressed */ if (type <= HUB_INIT3) usb_autopm_put_interface_async(to_usb_interface(hub->intfdev)); + + if (type == HUB_INIT2 || type == HUB_INIT3) + device_unlock(hub->intfdev); + + kref_put(&hub->kref, hub_release); } /* Implement the continuations for the delays above */ @@ -3304,7 +3324,7 @@ static int finish_port_resume(struct usb_device *udev) /* * There are some SS USB devices which take longer time for link training. * XHCI specs 4.19.4 says that when Link training is successful, port - * sets CSC bit to 1. So if SW reads port status before successful link + * sets CCS bit to 1. So if SW reads port status before successful link * training, then it will not find device to be present. * USB Analyzer log with such buggy devices show that in some cases * device switch on the RX termination after long delay of host enabling @@ -3315,14 +3335,17 @@ static int finish_port_resume(struct usb_device *udev) * routine implements a 2000 ms timeout for link training. If in a case * link trains before timeout, loop will exit earlier. * + * There are also some 2.0 hard drive based devices and 3.0 thumb + * drives that, when plugged into a 2.0 only port, take a long + * time to set CCS after VBUS enable. + * * FIXME: If a device was connected before suspend, but was removed * while system was asleep, then the loop in the following routine will * only exit at timeout. * - * This routine should only be called when persist is enabled for a SS - * device. + * This routine should only be called when persist is enabled. */ -static int wait_for_ss_port_enable(struct usb_device *udev, +static int wait_for_connected(struct usb_device *udev, struct usb_hub *hub, int *port1, u16 *portchange, u16 *portstatus) { @@ -3335,6 +3358,7 @@ static int wait_for_ss_port_enable(struct usb_device *udev, delay_ms += 20; status = hub_port_status(hub, *port1, portstatus, portchange); } + dev_dbg(&udev->dev, "Waited %dms for CONNECT\n", delay_ms); return status; } @@ -3434,8 +3458,8 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) } } - if (udev->persist_enabled && hub_is_superspeed(hub->hdev)) - status = wait_for_ss_port_enable(udev, hub, &port1, &portchange, + if (udev->persist_enabled) + status = wait_for_connected(udev, hub, &port1, &portchange, &portstatus); status = check_port_resume_type(udev, @@ -3875,17 +3899,30 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, return; } - if (usb_set_lpm_timeout(udev, state, timeout)) + if (usb_set_lpm_timeout(udev, state, timeout)) { /* If we can't set the parent hub U1/U2 timeout, * device-initiated LPM won't be allowed either, so let the xHCI * host know that this link state won't be enabled. */ hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state); + } else { + /* Only a configured device will accept the Set Feature + * U1/U2_ENABLE + */ + if (udev->actconfig) + usb_set_device_initiated_lpm(udev, state, true); - /* Only a configured device will accept the Set Feature U1/U2_ENABLE */ - else if (udev->actconfig) - usb_set_device_initiated_lpm(udev, state, true); - + /* As soon as usb_set_lpm_timeout(timeout) returns 0, the + * hub-initiated LPM is enabled. Thus, LPM is enabled no + * matter the result of usb_set_device_initiated_lpm(). + * The only difference is whether device is able to initiate + * LPM. + */ + if (state == USB3_LPM_U1) + udev->usb3_lpm_u1_enabled = 1; + else if (state == USB3_LPM_U2) + udev->usb3_lpm_u2_enabled = 1; + } } /* @@ -3925,6 +3962,18 @@ static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev, dev_warn(&udev->dev, "Could not disable xHCI %s timeout, " "bus schedule bandwidth may be impacted.\n", usb3_lpm_names[state]); + + /* As soon as usb_set_lpm_timeout(0) return 0, hub initiated LPM + * is disabled. Hub will disallows link to enter U1/U2 as well, + * even device is initiating LPM. Hence LPM is disabled if hub LPM + * timeout set to 0, no matter device-initiated LPM is disabled or + * not. + */ + if (state == USB3_LPM_U1) + udev->usb3_lpm_u1_enabled = 0; + else if (state == USB3_LPM_U2) + udev->usb3_lpm_u2_enabled = 0; + return 0; } @@ -3959,8 +4008,6 @@ int usb_disable_lpm(struct usb_device *udev) if (usb_disable_link_state(hcd, udev, USB3_LPM_U2)) goto enable_lpm; - udev->usb3_lpm_enabled = 0; - return 0; enable_lpm: @@ -3997,6 +4044,8 @@ EXPORT_SYMBOL_GPL(usb_unlocked_disable_lpm); void usb_enable_lpm(struct usb_device *udev) { struct usb_hcd *hcd; + struct usb_hub *hub; + struct usb_port *port_dev; if (!udev || !udev->parent || udev->speed != USB_SPEED_SUPER || @@ -4016,10 +4065,17 @@ void usb_enable_lpm(struct usb_device *udev) if (udev->lpm_disable_count > 0) return; - usb_enable_link_state(hcd, udev, USB3_LPM_U1); - usb_enable_link_state(hcd, udev, USB3_LPM_U2); + hub = usb_hub_to_struct_hub(udev->parent); + if (!hub) + return; + + port_dev = hub->ports[udev->portnum - 1]; + + if (port_dev->usb3_lpm_u1_permit) + usb_enable_link_state(hcd, udev, USB3_LPM_U1); - udev->usb3_lpm_enabled = 1; + if (port_dev->usb3_lpm_u2_permit) + usb_enable_link_state(hcd, udev, USB3_LPM_U2); } EXPORT_SYMBOL_GPL(usb_enable_lpm); @@ -4512,6 +4568,8 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, goto fail; } + usb_detect_quirks(udev); + if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) { retval = usb_get_bos_descriptor(udev); if (!retval) { @@ -4710,7 +4768,6 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, if (status < 0) goto loop; - usb_detect_quirks(udev); if (udev->quirks & USB_QUIRK_DELAY_INIT) msleep(1000); @@ -5326,9 +5383,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev) if (udev->usb2_hw_lpm_enabled == 1) usb_set_usb2_hardware_lpm(udev, 0); - bos = udev->bos; - udev->bos = NULL; - /* Disable LPM and LTM while we reset the device and reinstall the alt * settings. Device-initiated LPM settings, and system exit latency * settings are cleared when the device is reset, so we have to set @@ -5337,15 +5391,18 @@ static int usb_reset_and_verify_device(struct usb_device *udev) ret = usb_unlocked_disable_lpm(udev); if (ret) { dev_err(&udev->dev, "%s Failed to disable LPM\n.", __func__); - goto re_enumerate; + goto re_enumerate_no_bos; } ret = usb_disable_ltm(udev); if (ret) { dev_err(&udev->dev, "%s Failed to disable LTM\n.", __func__); - goto re_enumerate; + goto re_enumerate_no_bos; } + bos = udev->bos; + udev->bos = NULL; + for (i = 0; i < SET_CONFIG_TRIES; ++i) { /* ep0 maxpacket size may change; let the HCD know about it. @@ -5442,10 +5499,11 @@ done: return 0; re_enumerate: - /* LPM state doesn't matter when we're about to destroy the device. */ - hub_port_logical_disconnect(parent_hub, port1); usb_release_bos_descriptor(udev); udev->bos = bos; +re_enumerate_no_bos: + /* LPM state doesn't matter when we're about to destroy the device. */ + hub_port_logical_disconnect(parent_hub, port1); return -ENODEV; } diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 688817fb3246..45d070dd1d03 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -92,6 +92,8 @@ struct usb_hub { * @status_lock: synchronize port_event() vs usb_port_{suspend|resume} * @portnum: port index num based one * @is_superspeed cache super-speed status + * @usb3_lpm_u1_permit: whether USB3 U1 LPM is permitted. + * @usb3_lpm_u2_permit: whether USB3 U2 LPM is permitted. */ struct usb_port { struct usb_device *child; @@ -104,6 +106,8 @@ struct usb_port { struct mutex status_lock; u8 portnum; unsigned int is_superspeed:1; + unsigned int usb3_lpm_u1_permit:1; + unsigned int usb3_lpm_u2_permit:1; }; #define to_usb_port(_dev) \ @@ -155,4 +159,3 @@ static inline int hub_port_debounce_be_stable(struct usb_hub *hub, { return hub_port_debounce(hub, port1, false); } - diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 210618319f10..460c855be0d0 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -50,6 +50,72 @@ static ssize_t connect_type_show(struct device *dev, } static DEVICE_ATTR_RO(connect_type); +static ssize_t usb3_lpm_permit_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_port *port_dev = to_usb_port(dev); + const char *p; + + if (port_dev->usb3_lpm_u1_permit) { + if (port_dev->usb3_lpm_u2_permit) + p = "u1_u2"; + else + p = "u1"; + } else { + if (port_dev->usb3_lpm_u2_permit) + p = "u2"; + else + p = "0"; + } + + return sprintf(buf, "%s\n", p); +} + +static ssize_t usb3_lpm_permit_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_port *port_dev = to_usb_port(dev); + struct usb_device *udev = port_dev->child; + struct usb_hcd *hcd; + + if (!strncmp(buf, "u1_u2", 5)) { + port_dev->usb3_lpm_u1_permit = 1; + port_dev->usb3_lpm_u2_permit = 1; + + } else if (!strncmp(buf, "u1", 2)) { + port_dev->usb3_lpm_u1_permit = 1; + port_dev->usb3_lpm_u2_permit = 0; + + } else if (!strncmp(buf, "u2", 2)) { + port_dev->usb3_lpm_u1_permit = 0; + port_dev->usb3_lpm_u2_permit = 1; + + } else if (!strncmp(buf, "0", 1)) { + port_dev->usb3_lpm_u1_permit = 0; + port_dev->usb3_lpm_u2_permit = 0; + } else + return -EINVAL; + + /* If device is connected to the port, disable or enable lpm + * to make new u1 u2 setting take effect immediately. + */ + if (udev) { + hcd = bus_to_hcd(udev->bus); + if (!hcd) + return -EINVAL; + usb_lock_device(udev); + mutex_lock(hcd->bandwidth_mutex); + if (!usb_disable_lpm(udev)) + usb_enable_lpm(udev); + mutex_unlock(hcd->bandwidth_mutex); + usb_unlock_device(udev); + } + + return count; +} +static DEVICE_ATTR_RW(usb3_lpm_permit); + static struct attribute *port_dev_attrs[] = { &dev_attr_connect_type.attr, NULL, @@ -64,6 +130,21 @@ static const struct attribute_group *port_dev_group[] = { NULL, }; +static struct attribute *port_dev_usb3_attrs[] = { + &dev_attr_usb3_lpm_permit.attr, + NULL, +}; + +static struct attribute_group port_dev_usb3_attr_grp = { + .attrs = port_dev_usb3_attrs, +}; + +static const struct attribute_group *port_dev_usb3_group[] = { + &port_dev_attr_grp, + &port_dev_usb3_attr_grp, + NULL, +}; + static void usb_port_device_release(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev); @@ -206,7 +287,7 @@ static int link_peers(struct usb_port *left, struct usb_port *right) else method = "default"; - pr_warn("usb: failed to peer %s and %s by %s (%s:%s) (%s:%s)\n", + pr_debug("usb: failed to peer %s and %s by %s (%s:%s) (%s:%s)\n", dev_name(&left->dev), dev_name(&right->dev), method, dev_name(&left->dev), lpeer ? dev_name(&lpeer->dev) : "none", @@ -265,7 +346,7 @@ static void link_peers_report(struct usb_port *left, struct usb_port *right) if (rc == 0) { dev_dbg(&left->dev, "peered to %s\n", dev_name(&right->dev)); } else { - dev_warn(&left->dev, "failed to peer to %s (%d)\n", + dev_dbg(&left->dev, "failed to peer to %s (%d)\n", dev_name(&right->dev), rc); pr_warn_once("usb: port power management may be unreliable\n"); usb_port_block_power_off = 1; @@ -401,6 +482,7 @@ static void find_and_link_peer(struct usb_hub *hub, int port1) int usb_hub_create_port_device(struct usb_hub *hub, int port1) { struct usb_port *port_dev; + struct usb_device *hdev = hub->hdev; int retval; port_dev = kzalloc(sizeof(*port_dev), GFP_KERNEL); @@ -417,7 +499,12 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) port_dev->portnum = port1; set_bit(port1, hub->power_bits); port_dev->dev.parent = hub->intfdev; - port_dev->dev.groups = port_dev_group; + if (hub_is_superspeed(hdev)) { + port_dev->usb3_lpm_u1_permit = 1; + port_dev->usb3_lpm_u2_permit = 1; + port_dev->dev.groups = port_dev_usb3_group; + } else + port_dev->dev.groups = port_dev_group; port_dev->dev.type = &usb_port_device_type; port_dev->dev.driver = &usb_port_driver; if (hub_is_superspeed(hub->hdev)) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f5a381945db2..6dc810bce295 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -125,6 +125,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04f3, 0x016f), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, + { USB_DEVICE(0x04f3, 0x21b8), .driver_info = + USB_QUIRK_DEVICE_QUALIFIER }, + /* Roland SC-8820 */ { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME }, @@ -199,6 +202,12 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1a0a, 0x0200), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Blackmagic Design Intensity Shuttle */ + { USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM }, + + /* Blackmagic Design UltraStudio SDI */ + { USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM }, + { } /* terminating entry must be last */ }; diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index d9ec2de6c4cf..65b6e6b84043 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -531,7 +531,7 @@ static ssize_t usb2_lpm_besl_store(struct device *dev, } static DEVICE_ATTR_RW(usb2_lpm_besl); -static ssize_t usb3_hardware_lpm_show(struct device *dev, +static ssize_t usb3_hardware_lpm_u1_show(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_device *udev = to_usb_device(dev); @@ -539,7 +539,7 @@ static ssize_t usb3_hardware_lpm_show(struct device *dev, usb_lock_device(udev); - if (udev->usb3_lpm_enabled) + if (udev->usb3_lpm_u1_enabled) p = "enabled"; else p = "disabled"; @@ -548,7 +548,26 @@ static ssize_t usb3_hardware_lpm_show(struct device *dev, return sprintf(buf, "%s\n", p); } -static DEVICE_ATTR_RO(usb3_hardware_lpm); +static DEVICE_ATTR_RO(usb3_hardware_lpm_u1); + +static ssize_t usb3_hardware_lpm_u2_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + const char *p; + + usb_lock_device(udev); + + if (udev->usb3_lpm_u2_enabled) + p = "enabled"; + else + p = "disabled"; + + usb_unlock_device(udev); + + return sprintf(buf, "%s\n", p); +} +static DEVICE_ATTR_RO(usb3_hardware_lpm_u2); static struct attribute *usb2_hardware_lpm_attr[] = { &dev_attr_usb2_hardware_lpm.attr, @@ -562,7 +581,8 @@ static struct attribute_group usb2_hardware_lpm_attr_group = { }; static struct attribute *usb3_hardware_lpm_attr[] = { - &dev_attr_usb3_hardware_lpm.attr, + &dev_attr_usb3_hardware_lpm_u1.attr, + &dev_attr_usb3_hardware_lpm_u2.attr, NULL, }; static struct attribute_group usb3_hardware_lpm_attr_group = { @@ -592,7 +612,8 @@ static int add_power_attributes(struct device *dev) if (udev->usb2_hw_lpm_capable == 1) rc = sysfs_merge_group(&dev->kobj, &usb2_hardware_lpm_attr_group); - if (udev->lpm_capable == 1) + if (udev->speed == USB_SPEED_SUPER && + udev->lpm_capable == 1) rc = sysfs_merge_group(&dev->kobj, &usb3_hardware_lpm_attr_group); } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index f8bbd0b6d9fe..77e4c9bc0ab1 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -49,12 +49,7 @@ const char *usbcore_name = "usbcore"; static bool nousb; /* Disable USB when built into kernel image */ -/* To disable USB, kernel command line is 'nousb' not 'usbcore.nousb' */ -#ifdef MODULE module_param(nousb, bool, 0444); -#else -core_param(nousb, nousb, bool, 0444); -#endif /* * for external read access to <nousb> |