diff options
Diffstat (limited to 'drivers/usb/core')
| -rw-r--r-- | drivers/usb/core/config.c | 6 | ||||
| -rw-r--r-- | drivers/usb/core/driver.c | 3 | ||||
| -rw-r--r-- | drivers/usb/core/generic.c | 2 | ||||
| -rw-r--r-- | drivers/usb/core/hcd.c | 11 | ||||
| -rw-r--r-- | drivers/usb/core/hub.c | 61 | ||||
| -rw-r--r-- | drivers/usb/core/port.c | 32 | ||||
| -rw-r--r-- | drivers/usb/core/quirks.c | 6 | ||||
| -rw-r--r-- | drivers/usb/core/usb.c | 46 |
8 files changed, 98 insertions, 69 deletions
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 16b1fd9dc60c..48bc8a4814ac 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -406,7 +406,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, * the USB-2 spec requires such endpoints to have wMaxPacketSize = 0 * (see the end of section 5.6.3), so don't warn about them. */ - maxp = usb_endpoint_maxp(&endpoint->desc); + maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize); if (maxp == 0 && !(usb_endpoint_xfer_isoc(d) && asnum == 0)) { dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid wMaxPacketSize 0\n", cfgno, inum, asnum, d->bEndpointAddress); @@ -422,9 +422,9 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, maxpacket_maxes = full_speed_maxpacket_maxes; break; case USB_SPEED_HIGH: - /* Bits 12..11 are allowed only for HS periodic endpoints */ + /* Multiple-transactions bits are allowed only for HS periodic endpoints */ if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) { - i = maxp & (BIT(12) | BIT(11)); + i = maxp & USB_EP_MAXP_MULT_MASK; maxp &= ~i; } fallthrough; diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 072968c40ade..355ed33a2179 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/usb/driver.c - most of the driver model stuff for usb + * drivers/usb/core/driver.c - most of the driver model stuff for usb * * (C) Copyright 2005 Greg Kroah-Hartman <[email protected]> * @@ -834,6 +834,7 @@ const struct usb_device_id *usb_device_match_id(struct usb_device *udev, return NULL; } +EXPORT_SYMBOL_GPL(usb_device_match_id); bool usb_driver_applicable(struct usb_device *udev, struct usb_device_driver *udrv) diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index 26f9fb9f67ca..740342a2812a 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/usb/generic.c - generic driver for USB devices (not interfaces) + * drivers/usb/core/generic.c - generic driver for USB devices (not interfaces) * * (C) Copyright 2005 Greg Kroah-Hartman <[email protected]> * diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 4d326ee12c36..3e01dd6e509b 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -753,6 +753,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) { struct urb *urb; int length; + int status; unsigned long flags; char buffer[6]; /* Any root hubs with > 31 ports? */ @@ -770,11 +771,17 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) if (urb) { clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags); hcd->status_urb = NULL; + if (urb->transfer_buffer_length >= length) { + status = 0; + } else { + status = -EOVERFLOW; + length = urb->transfer_buffer_length; + } urb->actual_length = length; memcpy(urb->transfer_buffer, buffer, length); usb_hcd_unlink_urb_from_ep(hcd, urb); - usb_hcd_giveback_urb(hcd, urb, 0); + usb_hcd_giveback_urb(hcd, urb, status); } else { length = 0; set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags); @@ -1281,7 +1288,7 @@ static int hcd_alloc_coherent(struct usb_bus *bus, return -EFAULT; } - vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr), + vaddr = hcd_buffer_alloc(bus, size + sizeof(unsigned long), mem_flags, dma_handle); if (!vaddr) return -ENOMEM; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 86658a81d284..47a1c8bddf86 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1110,7 +1110,10 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) } else { hub_power_on(hub, true); } - } + /* Give some time on remote wakeup to let links to transit to U0 */ + } else if (hub_is_superspeed(hub->hdev)) + msleep(20); + init2: /* @@ -1225,7 +1228,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) */ if (portchange || (hub_is_superspeed(hub->hdev) && port_resumed)) - set_bit(port1, hub->change_bits); + set_bit(port1, hub->event_bits); } else if (udev->persist_enabled) { #ifdef CONFIG_PM @@ -2777,6 +2780,8 @@ static unsigned hub_is_wusb(struct usb_hub *hub) #define PORT_INIT_TRIES 4 #endif /* CONFIG_USB_FEW_INIT_RETRIES */ +#define DETECT_DISCONNECT_TRIES 5 + #define HUB_ROOT_RESET_TIME 60 /* times are in msec */ #define HUB_SHORT_RESET_TIME 10 #define HUB_BH_RESET_TIME 50 @@ -3570,7 +3575,7 @@ static int finish_port_resume(struct usb_device *udev) * This routine should only be called when persist is enabled. */ static int wait_for_connected(struct usb_device *udev, - struct usb_hub *hub, int *port1, + struct usb_hub *hub, int port1, u16 *portchange, u16 *portstatus) { int status = 0, delay_ms = 0; @@ -3584,7 +3589,7 @@ static int wait_for_connected(struct usb_device *udev, } msleep(20); delay_ms += 20; - status = hub_port_status(hub, *port1, portstatus, portchange); + status = hub_port_status(hub, port1, portstatus, portchange); } dev_dbg(&udev->dev, "Waited %dms for CONNECT\n", delay_ms); return status; @@ -3690,7 +3695,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) } if (udev->persist_enabled) - status = wait_for_connected(udev, hub, &port1, &portchange, + status = wait_for_connected(udev, hub, port1, &portchange, &portstatus); status = check_port_resume_type(udev, @@ -4700,8 +4705,6 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, if (oldspeed == USB_SPEED_LOW) delay = HUB_LONG_RESET_TIME; - mutex_lock(hcd->address0_mutex); - /* Reset the device; full speed may morph to high speed */ /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ retval = hub_port_reset(hub, port1, udev, delay, false); @@ -5016,7 +5019,6 @@ fail: hub_port_disable(hub, port1, 0); update_devnum(udev, devnum); /* for disconnect processing */ } - mutex_unlock(hcd->address0_mutex); return retval; } @@ -5191,6 +5193,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, struct usb_port *port_dev = hub->ports[port1 - 1]; struct usb_device *udev = port_dev->child; static int unreliable_port = -1; + bool retry_locked; /* Disconnect any existing devices under this port */ if (udev) { @@ -5246,8 +5249,11 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, unit_load = 100; status = 0; - for (i = 0; i < PORT_INIT_TRIES; i++) { + for (i = 0; i < PORT_INIT_TRIES; i++) { + usb_lock_port(port_dev); + mutex_lock(hcd->address0_mutex); + retry_locked = true; /* reallocate for each attempt, since references * to the previous one can escape in various ways */ @@ -5255,6 +5261,8 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, if (!udev) { dev_err(&port_dev->dev, "couldn't allocate usb_device\n"); + mutex_unlock(hcd->address0_mutex); + usb_unlock_port(port_dev); goto done; } @@ -5276,12 +5284,14 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, } /* reset (non-USB 3.0 devices) and get descriptor */ - usb_lock_port(port_dev); status = hub_port_init(hub, udev, port1, i); - usb_unlock_port(port_dev); if (status < 0) goto loop; + mutex_unlock(hcd->address0_mutex); + usb_unlock_port(port_dev); + retry_locked = false; + if (udev->quirks & USB_QUIRK_DELAY_INIT) msleep(2000); @@ -5374,6 +5384,10 @@ loop: usb_ep0_reinit(udev); release_devnum(udev); hub_free_dev(udev); + if (retry_locked) { + mutex_unlock(hcd->address0_mutex); + usb_unlock_port(port_dev); + } usb_put_dev(udev); if ((status == -ENOTCONN) || (status == -ENOTSUPP)) break; @@ -5534,6 +5548,7 @@ static void port_event(struct usb_hub *hub, int port1) struct usb_device *udev = port_dev->child; struct usb_device *hdev = hub->hdev; u16 portstatus, portchange; + int i = 0; connect_change = test_bit(port1, hub->change_bits); clear_bit(port1, hub->event_bits); @@ -5610,17 +5625,27 @@ static void port_event(struct usb_hub *hub, int port1) connect_change = 1; /* - * Warm reset a USB3 protocol port if it's in - * SS.Inactive state. + * Avoid trying to recover a USB3 SS.Inactive port with a warm reset if + * the device was disconnected. A 12ms disconnect detect timer in + * SS.Inactive state transitions the port to RxDetect automatically. + * SS.Inactive link error state is common during device disconnect. */ - if (hub_port_warm_reset_required(hub, port1, portstatus)) { - dev_dbg(&port_dev->dev, "do warm reset\n"); - if (!udev || !(portstatus & USB_PORT_STAT_CONNECTION) + while (hub_port_warm_reset_required(hub, port1, portstatus)) { + if ((i++ < DETECT_DISCONNECT_TRIES) && udev) { + u16 unused; + + msleep(20); + hub_port_status(hub, port1, &portstatus, &unused); + dev_dbg(&port_dev->dev, "Wait for inactive link disconnect detect\n"); + continue; + } else if (!udev || !(portstatus & USB_PORT_STAT_CONNECTION) || udev->state == USB_STATE_NOTATTACHED) { + dev_dbg(&port_dev->dev, "do warm reset, port only\n"); if (hub_port_reset(hub, port1, NULL, HUB_BH_RESET_TIME, true) < 0) hub_port_disable(hub, port1, 1); } else { + dev_dbg(&port_dev->dev, "do warm reset, full device\n"); usb_unlock_port(port_dev); usb_lock_device(udev); usb_reset_device(udev); @@ -5628,6 +5653,7 @@ static void port_event(struct usb_hub *hub, int port1) usb_lock_port(port_dev); connect_change = 0; } + break; } if (connect_change) @@ -5915,6 +5941,8 @@ static int usb_reset_and_verify_device(struct usb_device *udev) bos = udev->bos; udev->bos = NULL; + mutex_lock(hcd->address0_mutex); + for (i = 0; i < PORT_INIT_TRIES; ++i) { /* ep0 maxpacket size may change; let the HCD know about it. @@ -5924,6 +5952,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV) break; } + mutex_unlock(hcd->address0_mutex); if (ret < 0) goto re_enumerate; diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index dfcca9c876c7..c2bbf97a79be 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -9,6 +9,7 @@ #include <linux/slab.h> #include <linux/pm_qos.h> +#include <linux/component.h> #include "hub.h" @@ -528,6 +529,32 @@ static void find_and_link_peer(struct usb_hub *hub, int port1) link_peers_report(port_dev, peer); } +static int connector_bind(struct device *dev, struct device *connector, void *data) +{ + int ret; + + ret = sysfs_create_link(&dev->kobj, &connector->kobj, "connector"); + if (ret) + return ret; + + ret = sysfs_create_link(&connector->kobj, &dev->kobj, dev_name(dev)); + if (ret) + sysfs_remove_link(&dev->kobj, "connector"); + + return ret; +} + +static void connector_unbind(struct device *dev, struct device *connector, void *data) +{ + sysfs_remove_link(&connector->kobj, dev_name(dev)); + sysfs_remove_link(&dev->kobj, "connector"); +} + +static const struct component_ops connector_ops = { + .bind = connector_bind, + .unbind = connector_unbind, +}; + int usb_hub_create_port_device(struct usb_hub *hub, int port1) { struct usb_port *port_dev; @@ -577,6 +604,10 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) find_and_link_peer(hub, port1); + retval = component_add(&port_dev->dev, &connector_ops); + if (retval) + dev_warn(&port_dev->dev, "failed to add component\n"); + /* * Enable runtime pm and hold a refernce that hub_configure() * will drop once the PM_QOS_NO_POWER_OFF flag state has been set @@ -619,5 +650,6 @@ void usb_hub_remove_port_device(struct usb_hub *hub, int port1) peer = port_dev->peer; if (peer) unlink_peers(port_dev, peer); + component_del(&port_dev->dev, &connector_ops); device_unregister(&port_dev->dev); } diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 8239fe7129dd..d3c14b5ed4a1 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -434,6 +434,12 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1532, 0x0116), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Lenovo USB-C to Ethernet Adapter RTL8153-04 */ + { USB_DEVICE(0x17ef, 0x720c), .driver_info = USB_QUIRK_NO_LPM }, + + /* Lenovo Powered USB-C Travel Hub (4X90S92381, RTL8153 GigE) */ + { USB_DEVICE(0x17ef, 0x721e), .driver_info = USB_QUIRK_NO_LPM }, + /* Lenovo ThinkCenter A630Z TI024Gen3 usb-audio */ { USB_DEVICE(0x17ef, 0xa012), .driver_info = USB_QUIRK_DISCONNECT_SUSPEND }, diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 62368c4ed37a..2ce3667ec6fa 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -398,52 +398,6 @@ int usb_for_each_dev(void *data, int (*fn)(struct usb_device *, void *)) } EXPORT_SYMBOL_GPL(usb_for_each_dev); -struct each_hub_arg { - void *data; - int (*fn)(struct device *, void *); -}; - -static int __each_hub(struct usb_device *hdev, void *data) -{ - struct each_hub_arg *arg = (struct each_hub_arg *)data; - struct usb_hub *hub; - int ret = 0; - int i; - - hub = usb_hub_to_struct_hub(hdev); - if (!hub) - return 0; - - mutex_lock(&usb_port_peer_mutex); - - for (i = 0; i < hdev->maxchild; i++) { - ret = arg->fn(&hub->ports[i]->dev, arg->data); - if (ret) - break; - } - - mutex_unlock(&usb_port_peer_mutex); - - return ret; -} - -/** - * usb_for_each_port - interate over all USB ports in the system - * @data: data pointer that will be handed to the callback function - * @fn: callback function to be called for each USB port - * - * Iterate over all USB ports and call @fn for each, passing it @data. If it - * returns anything other than 0, we break the iteration prematurely and return - * that value. - */ -int usb_for_each_port(void *data, int (*fn)(struct device *, void *)) -{ - struct each_hub_arg arg = {data, fn}; - - return usb_for_each_dev(&arg, __each_hub); -} -EXPORT_SYMBOL_GPL(usb_for_each_port); - /** * usb_release_dev - free a usb device structure when all users of it are finished. * @dev: device that's been disconnected |