3 files changed, 13 insertions, 19 deletions

diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 57ed9e400c06..622b4a48e732 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -493,15 +493,6 @@ static int hcd_pci_suspend_noirq(struct device *dev)
 
 	pci_save_state(pci_dev);
 
-	/*
-	 * Some systems crash if an EHCI controller is in D3 during
-	 * a sleep transition.  We have to leave such controllers in D0.
-	 */
-	if (hcd->broken_pci_sleep) {
-		dev_dbg(dev, "Staying in PCI D0\n");
-		return retval;
-	}
-
 	/* If the root hub is dead rather than suspended, disallow remote
 	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
 	 * dying, so we only need to check the primary roothub.
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 04fb834c3fa1..8fb484984c86 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2324,12 +2324,16 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
 static int hub_port_reset(struct usb_hub *hub, int port1,
 			struct usb_device *udev, unsigned int delay, bool warm);
 
-/* Is a USB 3.0 port in the Inactive state? */
-static bool hub_port_inactive(struct usb_hub *hub, u16 portstatus)
+/* Is a USB 3.0 port in the Inactive or Complinance Mode state?
+ * Port worm reset is required to recover
+ */
+static bool hub_port_warm_reset_required(struct usb_hub *hub, u16 portstatus)
 {
 	return hub_is_superspeed(hub->hdev) &&
-		(portstatus & USB_PORT_STAT_LINK_STATE) ==
-		USB_SS_PORT_LS_SS_INACTIVE;
+		(((portstatus & USB_PORT_STAT_LINK_STATE) ==
+		  USB_SS_PORT_LS_SS_INACTIVE) ||
+		 ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+		  USB_SS_PORT_LS_COMP_MOD)) ;
 }
 
 static int hub_port_wait_reset(struct usb_hub *hub, int port1,
@@ -2365,7 +2369,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 			 *
 			 * See https://bugzilla.kernel.org/show_bug.cgi?id=41752
 			 */
-			if (hub_port_inactive(hub, portstatus)) {
+			if (hub_port_warm_reset_required(hub, portstatus)) {
 				int ret;
 
 				if ((portchange & USB_PORT_STAT_C_CONNECTION))
@@ -3379,7 +3383,7 @@ int usb_disable_lpm(struct usb_device *udev)
 		return 0;
 
 	udev->lpm_disable_count++;
-	if ((udev->u1_params.timeout == 0 && udev->u1_params.timeout == 0))
+	if ((udev->u1_params.timeout == 0 && udev->u2_params.timeout == 0))
 		return 0;
 
 	/* If LPM is enabled, attempt to disable it. */
@@ -4408,9 +4412,7 @@ static void hub_events(void)
 			/* Warm reset a USB3 protocol port if it's in
 			 * SS.Inactive state.
 			 */
-			if (hub_is_superspeed(hub->hdev) &&
-				(portstatus & USB_PORT_STAT_LINK_STATE)
-					== USB_SS_PORT_LS_SS_INACTIVE) {
+			if (hub_port_warm_reset_required(hub, portstatus)) {
 				dev_dbg(hub_dev, "warm reset port %d\n", i);
 				hub_port_reset(hub, i, NULL,
 						HUB_BH_RESET_TIME, true);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b548cf1dbc62..bdd1c6749d88 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1838,7 +1838,6 @@ free_interfaces:
 		intfc = cp->intf_cache[i];
 		intf->altsetting = intfc->altsetting;
 		intf->num_altsetting = intfc->num_altsetting;
-		intf->intf_assoc = find_iad(dev, cp, i);
 		kref_get(&intfc->ref);
 
 		alt = usb_altnum_to_altsetting(intf, 0);
@@ -1851,6 +1850,8 @@ free_interfaces:
 		if (!alt)
 			alt = &intf->altsetting[0];
 
+		intf->intf_assoc =
+			find_iad(dev, cp, alt->desc.bInterfaceNumber);
 		intf->cur_altsetting = alt;
 		usb_enable_interface(dev, intf, true);
 		intf->dev.parent = &dev->dev;