aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/core/hub.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/core/hub.c')
-rw-r--r--drivers/usb/core/hub.c142
1 files changed, 110 insertions, 32 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 0ff47eeffb49..008053039875 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -37,6 +37,7 @@
#include <asm/byteorder.h>
#include "hub.h"
+#include "phy.h"
#include "otg_productlist.h"
#define USB_VENDOR_GENESYS_LOGIC 0x05e3
@@ -47,12 +48,24 @@
#define USB_VENDOR_TEXAS_INSTRUMENTS 0x0451
#define USB_PRODUCT_TUSB8041_USB3 0x8140
#define USB_PRODUCT_TUSB8041_USB2 0x8142
-#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
-#define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02
+#define USB_VENDOR_MICROCHIP 0x0424
+#define USB_PRODUCT_USB4913 0x4913
+#define USB_PRODUCT_USB4914 0x4914
+#define USB_PRODUCT_USB4915 0x4915
+#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND BIT(0)
+#define HUB_QUIRK_DISABLE_AUTOSUSPEND BIT(1)
+#define HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL BIT(2)
#define USB_TP_TRANSMISSION_DELAY 40 /* ns */
#define USB_TP_TRANSMISSION_DELAY_MAX 65535 /* ns */
#define USB_PING_RESPONSE_TIME 400 /* ns */
+#define USB_REDUCE_FRAME_INTR_BINTERVAL 9
+
+/*
+ * The SET_ADDRESS request timeout will be 500 ms when
+ * USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT quirk flag is set.
+ */
+#define USB_SHORT_SET_ADDRESS_REQ_TIMEOUT 500 /* ms */
/* Protect struct usb_device->state and ->children members
* Note: Both are also protected by ->dev.sem, except that ->state can
@@ -117,7 +130,6 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
#define HUB_DEBOUNCE_STEP 25
#define HUB_DEBOUNCE_STABLE 100
-static void hub_release(struct kref *kref);
static int usb_reset_and_verify_device(struct usb_device *udev);
static int hub_port_disable(struct usb_hub *hub, int port1, int set_state);
static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1,
@@ -632,16 +644,21 @@ static int hub_ext_port_status(struct usb_hub *hub, int port1, int type,
struct usb_device *hdev = hub->hdev;
/*
- * Only roothub will be notified of port state changes,
+ * Only roothub will be notified of connection changes,
* since the USB PHY only cares about changes at the next
* level.
*/
if (is_root_hub(hdev)) {
struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
-
- if (hcd->usb_phy)
- usb_phy_notify_port_status(hcd->usb_phy,
- port1 - 1, *status, *change);
+ bool connect;
+ bool connect_change;
+
+ connect_change = *change & USB_PORT_STAT_C_CONNECTION;
+ connect = *status & USB_PORT_STAT_CONNECTION;
+ if (connect_change && connect)
+ usb_phy_roothub_notify_connect(hcd->phy_roothub, port1 - 1);
+ else if (connect_change)
+ usb_phy_roothub_notify_disconnect(hcd->phy_roothub, port1 - 1);
}
}
@@ -702,14 +719,14 @@ static void kick_hub_wq(struct usb_hub *hub)
*/
intf = to_usb_interface(hub->intfdev);
usb_autopm_get_interface_no_resume(intf);
- kref_get(&hub->kref);
+ hub_get(hub);
if (queue_work(hub_wq, &hub->events))
return;
/* the work has already been scheduled */
usb_autopm_put_interface_async(intf);
- kref_put(&hub->kref, hub_release);
+ hub_put(hub);
}
void usb_kick_hub_wq(struct usb_device *hdev)
@@ -1077,7 +1094,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
goto init2;
goto init3;
}
- kref_get(&hub->kref);
+ hub_get(hub);
/* The superspeed hub except for root hub has to use Hub Depth
* value as an offset into the route string to locate the bits
@@ -1325,7 +1342,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
device_unlock(&hdev->dev);
}
- kref_put(&hub->kref, hub_release);
+ hub_put(hub);
}
/* Implement the continuations for the delays above */
@@ -1741,6 +1758,16 @@ static void hub_release(struct kref *kref)
kfree(hub);
}
+void hub_get(struct usb_hub *hub)
+{
+ kref_get(&hub->kref);
+}
+
+void hub_put(struct usb_hub *hub)
+{
+ kref_put(&hub->kref, hub_release);
+}
+
static unsigned highspeed_hubs;
static void hub_disconnect(struct usb_interface *intf)
@@ -1789,7 +1816,7 @@ static void hub_disconnect(struct usb_interface *intf)
onboard_hub_destroy_pdevs(&hub->onboard_hub_devs);
- kref_put(&hub->kref, hub_release);
+ hub_put(hub);
}
static bool hub_descriptor_is_sane(struct usb_host_interface *desc)
@@ -1927,6 +1954,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
usb_autopm_get_interface_no_resume(intf);
}
+ if ((id->driver_info & HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL) &&
+ desc->endpoint[0].desc.bInterval > USB_REDUCE_FRAME_INTR_BINTERVAL) {
+ desc->endpoint[0].desc.bInterval =
+ USB_REDUCE_FRAME_INTR_BINTERVAL;
+ /* Tell the HCD about the interrupt ep's new bInterval */
+ usb_set_interface(hdev, 0, 0);
+ }
+
if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) {
onboard_hub_create_pdevs(hdev, &hub->onboard_hub_devs);
@@ -2056,9 +2091,19 @@ static void update_port_device_state(struct usb_device *udev)
if (udev->parent) {
hub = usb_hub_to_struct_hub(udev->parent);
- port_dev = hub->ports[udev->portnum - 1];
- WRITE_ONCE(port_dev->state, udev->state);
- sysfs_notify_dirent(port_dev->state_kn);
+
+ /*
+ * The Link Layer Validation System Driver (lvstest)
+ * has a test step to unbind the hub before running the
+ * rest of the procedure. This triggers hub_disconnect
+ * which will set the hub's maxchild to 0, further
+ * resulting in usb_hub_to_struct_hub returning NULL.
+ */
+ if (hub) {
+ port_dev = hub->ports[udev->portnum - 1];
+ WRITE_ONCE(port_dev->state, udev->state);
+ sysfs_notify_dirent(port_dev->state_kn);
+ }
}
}
@@ -2274,6 +2319,8 @@ void usb_disconnect(struct usb_device **pdev)
*/
if (!test_and_set_bit(port1, hub->child_usage_bits))
pm_runtime_get_sync(&port_dev->dev);
+
+ typec_deattach(port_dev->connector, &udev->dev);
}
usb_remove_ep_devs(&udev->ep0);
@@ -2389,17 +2436,25 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
}
} else if (desc->bLength == sizeof
(struct usb_otg_descriptor)) {
- /* Set a_alt_hnp_support for legacy otg device */
- err = usb_control_msg(udev,
- usb_sndctrlpipe(udev, 0),
- USB_REQ_SET_FEATURE, 0,
- USB_DEVICE_A_ALT_HNP_SUPPORT,
- 0, NULL, 0,
- USB_CTRL_SET_TIMEOUT);
- if (err < 0)
- dev_err(&udev->dev,
- "set a_alt_hnp_support failed: %d\n",
- err);
+ /*
+ * We are operating on a legacy OTP device
+ * These should be told that they are operating
+ * on the wrong port if we have another port that does
+ * support HNP
+ */
+ if (bus->otg_port != 0) {
+ /* Set a_alt_hnp_support for legacy otg device */
+ err = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE, 0,
+ USB_DEVICE_A_ALT_HNP_SUPPORT,
+ 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (err < 0)
+ dev_err(&udev->dev,
+ "set a_alt_hnp_support failed: %d\n",
+ err);
+ }
}
}
#endif
@@ -2620,6 +2675,8 @@ int usb_new_device(struct usb_device *udev)
if (!test_and_set_bit(port1, hub->child_usage_bits))
pm_runtime_get_sync(&port_dev->dev);
+
+ typec_attach(port_dev->connector, &udev->dev);
}
(void) usb_create_ep_devs(&udev->dev, &udev->ep0, udev);
@@ -4645,7 +4702,12 @@ EXPORT_SYMBOL_GPL(usb_ep0_reinit);
static int hub_set_address(struct usb_device *udev, int devnum)
{
int retval;
+ unsigned int timeout_ms = USB_CTRL_SET_TIMEOUT;
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+ struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
+
+ if (hub->hdev->quirks & USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT)
+ timeout_ms = USB_SHORT_SET_ADDRESS_REQ_TIMEOUT;
/*
* The host controller will choose the device address,
@@ -4658,11 +4720,11 @@ static int hub_set_address(struct usb_device *udev, int devnum)
if (udev->state != USB_STATE_DEFAULT)
return -EINVAL;
if (hcd->driver->address_device)
- retval = hcd->driver->address_device(hcd, udev);
+ retval = hcd->driver->address_device(hcd, udev, timeout_ms);
else
retval = usb_control_msg(udev, usb_sndaddr0pipe(),
USB_REQ_SET_ADDRESS, 0, devnum, 0,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
+ NULL, 0, timeout_ms);
if (retval == 0) {
update_devnum(udev, devnum);
/* Device now using proper address. */
@@ -5048,9 +5110,10 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
}
if (usb_endpoint_maxp(&udev->ep0.desc) == i) {
; /* Initial ep0 maxpacket guess is right */
- } else if ((udev->speed == USB_SPEED_FULL ||
+ } else if (((udev->speed == USB_SPEED_FULL ||
udev->speed == USB_SPEED_HIGH) &&
- (i == 8 || i == 16 || i == 32 || i == 64)) {
+ (i == 8 || i == 16 || i == 32 || i == 64)) ||
+ (udev->speed >= USB_SPEED_SUPER && i > 0)) {
/* Initial guess is wrong; use the descriptor's value */
if (udev->speed == USB_SPEED_FULL)
dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i);
@@ -5881,7 +5944,7 @@ out_hdev_lock:
/* Balance the stuff in kick_hub_wq() and allow autosuspend */
usb_autopm_put_interface(intf);
- kref_put(&hub->kref, hub_release);
+ hub_put(hub);
kcov_remote_stop();
}
@@ -5914,6 +5977,21 @@ static const struct usb_device_id hub_id_table[] = {
.idVendor = USB_VENDOR_TEXAS_INSTRUMENTS,
.idProduct = USB_PRODUCT_TUSB8041_USB3,
.driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
+ { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_PRODUCT,
+ .idVendor = USB_VENDOR_MICROCHIP,
+ .idProduct = USB_PRODUCT_USB4913,
+ .driver_info = HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL},
+ { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_PRODUCT,
+ .idVendor = USB_VENDOR_MICROCHIP,
+ .idProduct = USB_PRODUCT_USB4914,
+ .driver_info = HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL},
+ { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_PRODUCT,
+ .idVendor = USB_VENDOR_MICROCHIP,
+ .idProduct = USB_PRODUCT_USB4915,
+ .driver_info = HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL},
{ .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
.bDeviceClass = USB_CLASS_HUB},
{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
Powered by cgit, Gruvboxed by Blaster4385.