diff options
Diffstat (limited to 'drivers/usb/core/hub.c')
| -rw-r--r-- | drivers/usb/core/hub.c | 71 |
1 files changed, 44 insertions, 27 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b4584a0cd484..ffd7c99e24a3 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -47,12 +47,24 @@ #define USB_VENDOR_TEXAS_INSTRUMENTS 0x0451 #define USB_PRODUCT_TUSB8041_USB3 0x8140 #define USB_PRODUCT_TUSB8041_USB2 0x8142 -#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01 -#define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02 +#define USB_VENDOR_MICROCHIP 0x0424 +#define USB_PRODUCT_USB4913 0x4913 +#define USB_PRODUCT_USB4914 0x4914 +#define USB_PRODUCT_USB4915 0x4915 +#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND BIT(0) +#define HUB_QUIRK_DISABLE_AUTOSUSPEND BIT(1) +#define HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL BIT(2) #define USB_TP_TRANSMISSION_DELAY 40 /* ns */ #define USB_TP_TRANSMISSION_DELAY_MAX 65535 /* ns */ #define USB_PING_RESPONSE_TIME 400 /* ns */ +#define USB_REDUCE_FRAME_INTR_BINTERVAL 9 + +/* + * The SET_ADDRESS request timeout will be 500 ms when + * USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT quirk flag is set. + */ +#define USB_SHORT_SET_ADDRESS_REQ_TIMEOUT 500 /* ms */ /* Protect struct usb_device->state and ->children members * Note: Both are also protected by ->dev.sem, except that ->state can @@ -622,29 +634,6 @@ static int hub_ext_port_status(struct usb_hub *hub, int port1, int type, ret = 0; } mutex_unlock(&hub->status_mutex); - - /* - * There is no need to lock status_mutex here, because status_mutex - * protects hub->status, and the phy driver only checks the port - * status without changing the status. - */ - if (!ret) { - struct usb_device *hdev = hub->hdev; - - /* - * Only roothub will be notified of port state changes, - * since the USB PHY only cares about changes at the next - * level. - */ - if (is_root_hub(hdev)) { - struct usb_hcd *hcd = bus_to_hcd(hdev->bus); - - if (hcd->usb_phy) - usb_phy_notify_port_status(hcd->usb_phy, - port1 - 1, *status, *change); - } - } - return ret; } @@ -1927,6 +1916,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) usb_autopm_get_interface_no_resume(intf); } + if ((id->driver_info & HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL) && + desc->endpoint[0].desc.bInterval > USB_REDUCE_FRAME_INTR_BINTERVAL) { + desc->endpoint[0].desc.bInterval = + USB_REDUCE_FRAME_INTR_BINTERVAL; + /* Tell the HCD about the interrupt ep's new bInterval */ + usb_set_interface(hdev, 0, 0); + } + if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) { onboard_hub_create_pdevs(hdev, &hub->onboard_hub_devs); @@ -4649,7 +4646,12 @@ EXPORT_SYMBOL_GPL(usb_ep0_reinit); static int hub_set_address(struct usb_device *udev, int devnum) { int retval; + unsigned int timeout_ms = USB_CTRL_SET_TIMEOUT; struct usb_hcd *hcd = bus_to_hcd(udev->bus); + struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); + + if (hub->hdev->quirks & USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT) + timeout_ms = USB_SHORT_SET_ADDRESS_REQ_TIMEOUT; /* * The host controller will choose the device address, @@ -4662,11 +4664,11 @@ static int hub_set_address(struct usb_device *udev, int devnum) if (udev->state != USB_STATE_DEFAULT) return -EINVAL; if (hcd->driver->address_device) - retval = hcd->driver->address_device(hcd, udev); + retval = hcd->driver->address_device(hcd, udev, timeout_ms); else retval = usb_control_msg(udev, usb_sndaddr0pipe(), USB_REQ_SET_ADDRESS, 0, devnum, 0, - NULL, 0, USB_CTRL_SET_TIMEOUT); + NULL, 0, timeout_ms); if (retval == 0) { update_devnum(udev, devnum); /* Device now using proper address. */ @@ -5918,6 +5920,21 @@ static const struct usb_device_id hub_id_table[] = { .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS, .idProduct = USB_PRODUCT_TUSB8041_USB3, .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND}, + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT, + .idVendor = USB_VENDOR_MICROCHIP, + .idProduct = USB_PRODUCT_USB4913, + .driver_info = HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL}, + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT, + .idVendor = USB_VENDOR_MICROCHIP, + .idProduct = USB_PRODUCT_USB4914, + .driver_info = HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL}, + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + | USB_DEVICE_ID_MATCH_PRODUCT, + .idVendor = USB_VENDOR_MICROCHIP, + .idProduct = USB_PRODUCT_USB4915, + .driver_info = HUB_QUIRK_REDUCE_FRAME_INTR_BINTERVAL}, { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS, .bDeviceClass = USB_CLASS_HUB}, { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS, |