diff options
Diffstat (limited to 'drivers/usb/core/hub.c')
| -rw-r--r-- | drivers/usb/core/hub.c | 149 |
1 files changed, 64 insertions, 85 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index cbb146736f57..a56c75e09786 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -6,6 +6,8 @@ * (C) Copyright 1999 Gregory P. Smith * (C) Copyright 2001 Brad Hards (bhards@bigpond.net.au) * + * Released under the GPLv2 only. + * SPDX-License-Identifier: GPL-2.0 */ #include <linux/kernel.h> @@ -27,7 +29,7 @@ #include <linux/random.h> #include <linux/pm_qos.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <asm/byteorder.h> #include "hub.h" @@ -101,6 +103,7 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem); static void hub_release(struct kref *kref); static int usb_reset_and_verify_device(struct usb_device *udev); +static int hub_port_disable(struct usb_hub *hub, int port1, int set_state); static inline char *portspeed(struct usb_hub *hub, int portstatus) { @@ -899,88 +902,6 @@ static int hub_set_port_link_state(struct usb_hub *hub, int port1, } /* - * If USB 3.0 ports are placed into the Disabled state, they will no longer - * detect any device connects or disconnects. This is generally not what the - * USB core wants, since it expects a disabled port to produce a port status - * change event when a new device connects. - * - * Instead, set the link state to Disabled, wait for the link to settle into - * that state, clear any change bits, and then put the port into the RxDetect - * state. - */ -static int hub_usb3_port_disable(struct usb_hub *hub, int port1) -{ - int ret; - int total_time; - u16 portchange, portstatus; - - if (!hub_is_superspeed(hub->hdev)) - return -EINVAL; - - ret = hub_port_status(hub, port1, &portstatus, &portchange); - if (ret < 0) - return ret; - - /* - * USB controller Advanced Micro Devices, Inc. [AMD] FCH USB XHCI - * Controller [1022:7814] will have spurious result making the following - * usb 3.0 device hotplugging route to the 2.0 root hub and recognized - * as high-speed device if we set the usb 3.0 port link state to - * Disabled. Since it's already in USB_SS_PORT_LS_RX_DETECT state, we - * check the state here to avoid the bug. - */ - if ((portstatus & USB_PORT_STAT_LINK_STATE) == - USB_SS_PORT_LS_RX_DETECT) { - dev_dbg(&hub->ports[port1 - 1]->dev, - "Not disabling port; link state is RxDetect\n"); - return ret; - } - - ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED); - if (ret) - return ret; - - /* Wait for the link to enter the disabled state. */ - for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) { - ret = hub_port_status(hub, port1, &portstatus, &portchange); - if (ret < 0) - return ret; - - if ((portstatus & USB_PORT_STAT_LINK_STATE) == - USB_SS_PORT_LS_SS_DISABLED) - break; - if (total_time >= HUB_DEBOUNCE_TIMEOUT) - break; - msleep(HUB_DEBOUNCE_STEP); - } - if (total_time >= HUB_DEBOUNCE_TIMEOUT) - dev_warn(&hub->ports[port1 - 1]->dev, - "Could not disable after %d ms\n", total_time); - - return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT); -} - -static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) -{ - struct usb_port *port_dev = hub->ports[port1 - 1]; - struct usb_device *hdev = hub->hdev; - int ret = 0; - - if (port_dev->child && set_state) - usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED); - if (!hub->error) { - if (hub_is_superspeed(hub->hdev)) - ret = hub_usb3_port_disable(hub, port1); - else - ret = usb_clear_port_feature(hdev, port1, - USB_PORT_FEAT_ENABLE); - } - if (ret && ret != -ENODEV) - dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret); - return ret; -} - -/* * Disable a port and mark a logical connect-change event, so that some * time later hub_wq will disconnect() any existing usb_device on the port * and will re-enumerate if there actually is a device attached. @@ -2731,8 +2652,15 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, if (ret < 0) return ret; - /* The port state is unknown until the reset completes. */ - if (!(portstatus & USB_PORT_STAT_RESET)) + /* + * The port state is unknown until the reset completes. + * + * On top of that, some chips may require additional time + * to re-establish a connection after the reset is complete, + * so also wait for the connection to be re-established. + */ + if (!(portstatus & USB_PORT_STAT_RESET) && + (portstatus & USB_PORT_STAT_CONNECTION)) break; /* switch to the long delay after two short delay failures */ @@ -4140,6 +4068,26 @@ void usb_unlocked_enable_lpm(struct usb_device *udev) } EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm); +/* usb3 devices use U3 for disabled, make sure remote wakeup is disabled */ +static void hub_usb3_port_prepare_disable(struct usb_hub *hub, + struct usb_port *port_dev) +{ + struct usb_device *udev = port_dev->child; + int ret; + + if (udev && udev->port_is_suspended && udev->do_remote_wakeup) { + ret = hub_set_port_link_state(hub, port_dev->portnum, + USB_SS_PORT_LS_U0); + if (!ret) { + msleep(USB_RESUME_TIMEOUT); + ret = usb_disable_remote_wakeup(udev); + } + if (ret) + dev_warn(&udev->dev, + "Port disable: can't disable remote wake\n"); + udev->do_remote_wakeup = 0; + } +} #else /* CONFIG_PM */ @@ -4147,6 +4095,9 @@ EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm); #define hub_resume NULL #define hub_reset_resume NULL +static inline void hub_usb3_port_prepare_disable(struct usb_hub *hub, + struct usb_port *port_dev) { } + int usb_disable_lpm(struct usb_device *udev) { return 0; @@ -4182,6 +4133,34 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, #endif /* CONFIG_PM */ +/* + * USB-3 does not have a similar link state as USB-2 that will avoid negotiating + * a connection with a plugged-in cable but will signal the host when the cable + * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices + */ +static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) +{ + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_device *hdev = hub->hdev; + int ret = 0; + + if (!hub->error) { + if (hub_is_superspeed(hub->hdev)) { + hub_usb3_port_prepare_disable(hub, port_dev); + ret = hub_set_port_link_state(hub, port_dev->portnum, + USB_SS_PORT_LS_U3); + } else { + ret = usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_ENABLE); + } + } + if (port_dev->child && set_state) + usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED); + if (ret && ret != -ENODEV) + dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret); + return ret; +} + /* USB 2.0 spec, 7.1.7.3 / fig 7-29: * |