aboutsummaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/8250/8250_mca.c61
-rw-r--r--drivers/tty/serial/8250/Kconfig9
-rw-r--r--drivers/tty/serial/8250/Makefile1
-rw-r--r--drivers/tty/serial/sh-sci.c49
-rw-r--r--drivers/tty/vt/keyboard.c20
5 files changed, 52 insertions, 88 deletions
diff --git a/drivers/tty/serial/8250/8250_mca.c b/drivers/tty/serial/8250/8250_mca.c
deleted file mode 100644
index d20abf04541e..000000000000
--- a/drivers/tty/serial/8250/8250_mca.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright (C) 2005 Russell King.
- * Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mca.h>
-#include <linux/serial_8250.h>
-
-/*
- * FIXME: Should we be doing AUTO_IRQ here?
- */
-#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define MCA_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ
-#else
-#define MCA_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST
-#endif
-
-#define PORT(_base,_irq) \
- { \
- .iobase = _base, \
- .irq = _irq, \
- .uartclk = 1843200, \
- .iotype = UPIO_PORT, \
- .flags = MCA_FLAGS, \
- }
-
-static struct plat_serial8250_port mca_data[] = {
- PORT(0x3220, 3),
- PORT(0x3228, 3),
- PORT(0x4220, 3),
- PORT(0x4228, 3),
- PORT(0x5220, 3),
- PORT(0x5228, 3),
- { },
-};
-
-static struct platform_device mca_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_MCA,
- .dev = {
- .platform_data = mca_data,
- },
-};
-
-static int __init mca_init(void)
-{
- if (!MCA_bus)
- return -ENODEV;
- return platform_device_register(&mca_device);
-}
-
-module_init(mca_init);
-
-MODULE_AUTHOR("Russell King");
-MODULE_DESCRIPTION("8250 serial probe module for MCA ports");
-MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 8bc7ecbf6bea..a27dd0569bd7 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -241,15 +241,6 @@ config SERIAL_8250_RSA
help
::: To be written :::
-config SERIAL_8250_MCA
- tristate "Support 8250-type ports on MCA buses"
- depends on SERIAL_8250 != n && MCA
- help
- Say Y here if you have a MCA serial ports.
-
- To compile this driver as a module, choose M here: the module
- will be called 8250_mca.
-
config SERIAL_8250_ACORN
tristate "Acorn expansion card serial port support"
depends on ARCH_ACORN && SERIAL_8250
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 3f35eacdf673..d7533c7d2c1a 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
-obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 3158e17b665c..4604153b7954 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1052,9 +1052,17 @@ static int sci_request_irq(struct sci_port *port)
if (SCIx_IRQ_IS_MUXED(port)) {
i = SCIx_MUX_IRQ;
irq = up->irq;
- } else
+ } else {
irq = port->cfg->irqs[i];
+ /*
+ * Certain port types won't support all of the
+ * available interrupt sources.
+ */
+ if (unlikely(!irq))
+ continue;
+ }
+
desc = sci_irq_desc + i;
port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s",
dev_name(up->dev), desc->desc);
@@ -1094,6 +1102,15 @@ static void sci_free_irq(struct sci_port *port)
* IRQ first.
*/
for (i = 0; i < SCIx_NR_IRQS; i++) {
+ unsigned int irq = port->cfg->irqs[i];
+
+ /*
+ * Certain port types won't support all of the available
+ * interrupt sources.
+ */
+ if (unlikely(!irq))
+ continue;
+
free_irq(port->cfg->irqs[i], port);
kfree(port->irqstr[i]);
@@ -1564,10 +1581,32 @@ static void sci_enable_ms(struct uart_port *port)
static void sci_break_ctl(struct uart_port *port, int break_state)
{
- /*
- * Not supported by hardware. Most parts couple break and rx
- * interrupts together, with break detection always enabled.
- */
+ struct sci_port *s = to_sci_port(port);
+ struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
+ unsigned short scscr, scsptr;
+
+ /* check wheter the port has SCSPTR */
+ if (!reg->size) {
+ /*
+ * Not supported by hardware. Most parts couple break and rx
+ * interrupts together, with break detection always enabled.
+ */
+ return;
+ }
+
+ scsptr = serial_port_in(port, SCSPTR);
+ scscr = serial_port_in(port, SCSCR);
+
+ if (break_state == -1) {
+ scsptr = (scsptr | SCSPTR_SPB2IO) & ~SCSPTR_SPB2DT;
+ scscr &= ~SCSCR_TE;
+ } else {
+ scsptr = (scsptr | SCSPTR_SPB2DT) & ~SCSPTR_SPB2IO;
+ scscr |= SCSCR_TE;
+ }
+
+ serial_port_out(port, SCSPTR, scsptr);
+ serial_port_out(port, SCSCR, scscr);
}
#ifdef CONFIG_SERIAL_SH_SCI_DMA
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 3b0c4e32ed7b..48cc6f25cfd3 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -53,17 +53,13 @@ extern void ctrl_alt_del(void);
#define KBD_DEFMODE ((1 << VC_REPEAT) | (1 << VC_META))
-/*
- * Some laptops take the 789uiojklm,. keys as number pad when NumLock is on.
- * This seems a good reason to start with NumLock off. On HIL keyboards
- * of PARISC machines however there is no NumLock key and everyone expects the
- * keypad to be used for numbers.
- */
-
-#if defined(CONFIG_PARISC) && (defined(CONFIG_KEYBOARD_HIL) || defined(CONFIG_KEYBOARD_HIL_OLD))
-#define KBD_DEFLEDS (1 << VC_NUMLOCK)
+#if defined(CONFIG_X86) || defined(CONFIG_PARISC)
+#include <asm/kbdleds.h>
#else
-#define KBD_DEFLEDS 0
+static inline int kbd_defleds(void)
+{
+ return 0;
+}
#endif
#define KBD_DEFLOCK 0
@@ -1524,8 +1520,8 @@ int __init kbd_init(void)
int error;
for (i = 0; i < MAX_NR_CONSOLES; i++) {
- kbd_table[i].ledflagstate = KBD_DEFLEDS;
- kbd_table[i].default_ledflagstate = KBD_DEFLEDS;
+ kbd_table[i].ledflagstate = kbd_defleds();
+ kbd_table[i].default_ledflagstate = kbd_defleds();
kbd_table[i].ledmode = LED_SHOW_FLAGS;
kbd_table[i].lockstate = KBD_DEFLOCK;
kbd_table[i].slockstate = 0;
Powered by cgit, Gruvboxed by Blaster4385.