diff options
Diffstat (limited to 'drivers/tty/serial/fsl_lpuart.c')
| -rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 23 |
1 files changed, 17 insertions, 6 deletions
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 77efa7ee6eda..57b0632a3db6 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -184,6 +184,7 @@ #define UARTCTRL_SBK 0x00010000 #define UARTCTRL_MA1IE 0x00008000 #define UARTCTRL_MA2IE 0x00004000 +#define UARTCTRL_M7 0x00000800 #define UARTCTRL_IDLECFG GENMASK(10, 8) #define UARTCTRL_LOOPS 0x00000080 #define UARTCTRL_DOZEEN 0x00000040 @@ -2222,8 +2223,9 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, modem = lpuart32_read(&sport->port, UARTMODIR); sport->is_cs7 = false; /* - * only support CS8 and CS7, and for CS7 must enable PE. + * only support CS8 and CS7 * supported mode: + * - (7,n,1) (imx only) * - (7,e/o,1) * - (8,n,1) * - (8,m/s,1) @@ -2238,7 +2240,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, if ((termios->c_cflag & CSIZE) == CS8 || (termios->c_cflag & CSIZE) == CS7) - ctrl = old_ctrl & ~UARTCTRL_M; + ctrl = old_ctrl & ~(UARTCTRL_M | UARTCTRL_M7); if (termios->c_cflag & CMSPAR) { if ((termios->c_cflag & CSIZE) != CS8) { @@ -2265,9 +2267,18 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, else bd &= ~UARTBAUD_SBNS; - /* parity must be enabled when CS7 to match 8-bits format */ - if ((termios->c_cflag & CSIZE) == CS7) - termios->c_cflag |= PARENB; + /* + * imx support 7-bits format, no limitation on parity when CS7 + * for layerscape, parity must be enabled when CS7 to match 8-bits format + */ + if ((termios->c_cflag & CSIZE) == CS7 && !(termios->c_cflag & PARENB)) { + if (is_imx7ulp_lpuart(sport) || + is_imx8ulp_lpuart(sport) || + is_imx8qxp_lpuart(sport)) + ctrl |= UARTCTRL_M7; + else + termios->c_cflag |= PARENB; + } if ((termios->c_cflag & PARENB)) { if (termios->c_cflag & CMSPAR) { @@ -3206,7 +3217,7 @@ static const struct dev_pm_ops lpuart_pm_ops = { static struct platform_driver lpuart_driver = { .probe = lpuart_probe, - .remove_new = lpuart_remove, + .remove = lpuart_remove, .driver = { .name = "fsl-lpuart", .of_match_table = lpuart_dt_ids, |