diff options
Diffstat (limited to 'drivers/serial/pmac_zilog.c')
| -rw-r--r-- | drivers/serial/pmac_zilog.c | 246 |
1 files changed, 180 insertions, 66 deletions
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 683e66f18e8c..f020de1cdd50 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -63,11 +63,17 @@ #include <asm/sections.h> #include <asm/io.h> #include <asm/irq.h> + +#ifdef CONFIG_PPC_PMAC #include <asm/prom.h> #include <asm/machdep.h> #include <asm/pmac_feature.h> #include <asm/dbdma.h> #include <asm/macio.h> +#else +#include <linux/platform_device.h> +#define of_machine_is_compatible(x) (0) +#endif #if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ @@ -83,11 +89,9 @@ static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt <[email protected]>)"; MODULE_AUTHOR("Benjamin Herrenschmidt <[email protected]>"); -MODULE_DESCRIPTION("Driver for the PowerMac serial ports."); +MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports."); MODULE_LICENSE("GPL"); -#define PWRDBG(fmt, arg...) printk(KERN_DEBUG fmt , ## arg) - #ifdef CONFIG_SERIAL_PMACZILOG_TTYS #define PMACZILOG_MAJOR TTY_MAJOR #define PMACZILOG_MINOR 64 @@ -153,8 +157,8 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs) write_zsreg(uap, R10, regs[R10]); /* Set TX/RX controls sans the enable bits. */ - write_zsreg(uap, R3, regs[R3] & ~RxENABLE); - write_zsreg(uap, R5, regs[R5] & ~TxENABLE); + write_zsreg(uap, R3, regs[R3] & ~RxENABLE); + write_zsreg(uap, R5, regs[R5] & ~TxENABLE); /* now set R7 "prime" on ESCC */ write_zsreg(uap, R15, regs[R15] | EN85C30); @@ -205,7 +209,7 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs) */ static void pmz_maybe_update_regs(struct uart_pmac_port *uap) { - if (!ZS_REGS_HELD(uap)) { + if (!ZS_REGS_HELD(uap)) { if (ZS_TX_ACTIVE(uap)) { uap->flags |= PMACZILOG_FLAG_REGS_HELD; } else { @@ -281,7 +285,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) spin_lock(&uap->port.lock); if (swallow) goto next_char; - } + } #endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */ /* A real serial line, record the character and status. */ @@ -317,7 +321,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) if (uap->port.ignore_status_mask == 0xff || (r1 & uap->port.ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(tty, ch, flag); } if (r1 & Rx_OVR) tty_insert_flip_char(tty, 0, TTY_OVERRUN); @@ -341,7 +345,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); write_zsreg(uap, R1, uap->curregs[R1]); zssync(uap); - dev_err(&uap->dev->ofdev.dev, "pmz: rx irq flood !\n"); + pmz_error("pmz: rx irq flood !\n"); return tty; } @@ -470,47 +474,47 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id) uap_a = pmz_get_port_A(uap); uap_b = uap_a->mate; - - spin_lock(&uap_a->port.lock); + + spin_lock(&uap_a->port.lock); r3 = read_zsreg(uap_a, R3); #ifdef DEBUG_HARD pmz_debug("irq, r3: %x\n", r3); #endif - /* Channel A */ + /* Channel A */ tty = NULL; - if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { write_zsreg(uap_a, R0, RES_H_IUS); zssync(uap_a); - if (r3 & CHAEXT) - pmz_status_handle(uap_a); + if (r3 & CHAEXT) + pmz_status_handle(uap_a); if (r3 & CHARxIP) tty = pmz_receive_chars(uap_a); - if (r3 & CHATxIP) - pmz_transmit_chars(uap_a); - rc = IRQ_HANDLED; - } - spin_unlock(&uap_a->port.lock); + if (r3 & CHATxIP) + pmz_transmit_chars(uap_a); + rc = IRQ_HANDLED; + } + spin_unlock(&uap_a->port.lock); if (tty != NULL) tty_flip_buffer_push(tty); if (uap_b->node == NULL) goto out; - spin_lock(&uap_b->port.lock); + spin_lock(&uap_b->port.lock); tty = NULL; if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { write_zsreg(uap_b, R0, RES_H_IUS); zssync(uap_b); - if (r3 & CHBEXT) - pmz_status_handle(uap_b); - if (r3 & CHBRxIP) - tty = pmz_receive_chars(uap_b); - if (r3 & CHBTxIP) - pmz_transmit_chars(uap_b); - rc = IRQ_HANDLED; - } - spin_unlock(&uap_b->port.lock); + if (r3 & CHBEXT) + pmz_status_handle(uap_b); + if (r3 & CHBRxIP) + tty = pmz_receive_chars(uap_b); + if (r3 & CHBTxIP) + pmz_transmit_chars(uap_b); + rc = IRQ_HANDLED; + } + spin_unlock(&uap_b->port.lock); if (tty != NULL) tty_flip_buffer_push(tty); @@ -718,7 +722,7 @@ static void pmz_enable_ms(struct uart_port *port) if (ZS_IS_ASLEEP(uap)) return; - /* NOTE: Not subject to 'transmitter active' rule. */ + /* NOTE: Not subject to 'transmitter active' rule. */ write_zsreg(uap, R15, uap->curregs[R15]); } } @@ -748,7 +752,7 @@ static void pmz_break_ctl(struct uart_port *port, int break_state) if (new_reg != uap->curregs[R5]) { uap->curregs[R5] = new_reg; - /* NOTE: Not subject to 'transmitter active' rule. */ + /* NOTE: Not subject to 'transmitter active' rule. */ if (ZS_IS_ASLEEP(uap)) return; write_zsreg(uap, R5, uap->curregs[R5]); @@ -757,6 +761,8 @@ static void pmz_break_ctl(struct uart_port *port, int break_state) spin_unlock_irqrestore(&port->lock, flags); } +#ifdef CONFIG_PPC_PMAC + /* * Turn power on or off to the SCC and associated stuff * (port drivers, modem, IR port, etc.) @@ -792,6 +798,15 @@ static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) return delay; } +#else + +static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) +{ + return 0; +} + +#endif /* !CONFIG_PPC_PMAC */ + /* * FixZeroBug....Works around a bug in the SCC receving channel. * Inspired from Darwin code, 15 Sept. 2000 -DanM @@ -908,7 +923,6 @@ static int __pmz_startup(struct uart_pmac_port *uap) /* Remember status for DCD/CTS changes */ uap->prev_status = read_zsreg(uap, R0); - return pwr_delay; } @@ -955,9 +969,9 @@ static int pmz_startup(struct uart_port *port) } pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON; - if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, "PowerMac Zilog", uap)) { - dev_err(&uap->dev->ofdev.dev, - "Unable to register zs interrupt handler.\n"); + if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, + "SCC", uap)) { + pmz_error("Unable to register zs interrupt handler.\n"); pmz_set_scc_power(uap, 0); mutex_unlock(&pmz_irq_mutex); return -ENXIO; @@ -983,7 +997,7 @@ static int pmz_startup(struct uart_port *port) if (!ZS_IS_EXTCLK(uap)) uap->curregs[R1] |= EXT_INT_ENAB; write_zsreg(uap, R1, uap->curregs[R1]); - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock_irqrestore(&port->lock, flags); pmz_debug("pmz: startup() done.\n"); @@ -1003,7 +1017,7 @@ static void pmz_shutdown(struct uart_port *port) mutex_lock(&pmz_irq_mutex); /* Release interrupt handler */ - free_irq(uap->port.irq, uap); + free_irq(uap->port.irq, uap); spin_lock_irqsave(&port->lock, flags); @@ -1051,7 +1065,6 @@ static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag, { int brg; - /* Switch to external clocking for IrDA high clock rates. That * code could be re-used for Midi interfaces with different * multipliers @@ -1198,7 +1211,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0 || (read_zsreg(uap, R1) & ALL_SNT) == 0) { if (--t <= 0) { - dev_err(&uap->dev->ofdev.dev, "transmitter didn't drain\n"); + pmz_error("transmitter didn't drain\n"); return; } udelay(10); @@ -1214,7 +1227,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) read_zsdata(uap); mdelay(10); if (--t <= 0) { - dev_err(&uap->dev->ofdev.dev, "receiver didn't drain\n"); + pmz_error("receiver didn't drain\n"); return; } } @@ -1223,20 +1236,19 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) uap->curregs[R5] |= DTR; write_zsreg(uap, R5, uap->curregs[R5]); zssync(uap); - mdelay(1); + mdelay(1); /* Switch SCC to 19200 */ pmz_convert_to_zs(uap, CS8, 0, 19200); pmz_load_zsregs(uap, uap->curregs); - mdelay(1); + mdelay(1); /* Write get_version command byte */ write_zsdata(uap, 1); t = 5000; while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { if (--t <= 0) { - dev_err(&uap->dev->ofdev.dev, - "irda_setup timed out on get_version byte\n"); + pmz_error("irda_setup timed out on get_version byte\n"); goto out; } udelay(10); @@ -1244,8 +1256,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) version = read_zsdata(uap); if (version < 4) { - dev_info(&uap->dev->ofdev.dev, "IrDA: dongle version %d not supported\n", - version); + pmz_info("IrDA: dongle version %d not supported\n", version); goto out; } @@ -1254,18 +1265,16 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) t = 5000; while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { if (--t <= 0) { - dev_err(&uap->dev->ofdev.dev, - "irda_setup timed out on speed mode byte\n"); + pmz_error("irda_setup timed out on speed mode byte\n"); goto out; } udelay(10); } t = read_zsdata(uap); if (t != cmdbyte) - dev_err(&uap->dev->ofdev.dev, - "irda_setup speed mode byte = %x (%x)\n", t, cmdbyte); + pmz_error("irda_setup speed mode byte = %x (%x)\n", t, cmdbyte); - dev_info(&uap->dev->ofdev.dev, "IrDA setup for %ld bps, dongle version: %d\n", + pmz_info("IrDA setup for %ld bps, dongle version: %d\n", *baud, version); (void)read_zsdata(uap); @@ -1415,7 +1424,7 @@ static void pmz_poll_put_char(struct uart_port *port, unsigned char c) write_zsdata(uap, c); } -#endif +#endif /* CONFIG_CONSOLE_POLL */ static struct uart_ops pmz_pops = { .tx_empty = pmz_tx_empty, @@ -1440,6 +1449,8 @@ static struct uart_ops pmz_pops = { #endif }; +#ifdef CONFIG_PPC_PMAC + /* * Setup one port structure after probing, HW is down at this point, * Unlike sunzilog, we don't need to pre-init the spinlock as we don't @@ -1463,7 +1474,7 @@ static int __init pmz_init_port(struct uart_pmac_port *uap) return -ENODEV; uap->port.mapbase = r_ports.start; uap->port.membase = ioremap(uap->port.mapbase, 0x1000); - + uap->control_reg = uap->port.membase; uap->data_reg = uap->control_reg + 0x10; @@ -1590,7 +1601,7 @@ static void pmz_dispose_port(struct uart_pmac_port *uap) } /* - * Called upon match with an escc node in the devive-tree. + * Called upon match with an escc node in the device-tree. */ static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match) { @@ -1812,7 +1823,7 @@ static int __init pmz_probe(void) pmz_ports[count].node = node_a; pmz_ports[count+1].node = node_b; pmz_ports[count].port.line = count; - pmz_ports[count+1].port.line = count+1; + pmz_ports[count+1].port.line = count+1; /* * Setup the ports for real @@ -1836,6 +1847,88 @@ next: return 0; } +#else + +extern struct platform_device scc_a_pdev, scc_b_pdev; + +static int __init pmz_init_port(struct uart_pmac_port *uap) +{ + struct resource *r_ports; + int irq; + + r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0); + irq = platform_get_irq(uap->node, 0); + if (!r_ports || !irq) + return -ENODEV; + + uap->port.mapbase = r_ports->start; + uap->port.membase = (unsigned char __iomem *) r_ports->start; + uap->port.iotype = UPIO_MEM; + uap->port.irq = irq; + uap->port.uartclk = ZS_CLOCK; + uap->port.fifosize = 1; + uap->port.ops = &pmz_pops; + uap->port.type = PORT_PMAC_ZILOG; + uap->port.flags = 0; + + uap->control_reg = uap->port.membase; + uap->data_reg = uap->control_reg + 4; + uap->port_type = 0; + + pmz_convert_to_zs(uap, CS8, 0, 9600); + + return 0; +} + +static int __init pmz_probe(void) +{ + int err; + + pmz_ports_count = 0; + + pmz_ports[0].mate = &pmz_ports[1]; + pmz_ports[0].port.line = 0; + pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A; + pmz_ports[0].node = &scc_a_pdev; + err = pmz_init_port(&pmz_ports[0]); + if (err) + return err; + pmz_ports_count++; + + pmz_ports[1].mate = &pmz_ports[0]; + pmz_ports[1].port.line = 1; + pmz_ports[1].flags = 0; + pmz_ports[1].node = &scc_b_pdev; + err = pmz_init_port(&pmz_ports[1]); + if (err) + return err; + pmz_ports_count++; + + return 0; +} + +static void pmz_dispose_port(struct uart_pmac_port *uap) +{ + memset(uap, 0, sizeof(struct uart_pmac_port)); +} + +static int __init pmz_attach(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < pmz_ports_count; i++) + if (pmz_ports[i].node == pdev) + return 0; + return -ENODEV; +} + +static int __exit pmz_detach(struct platform_device *pdev) +{ + return 0; +} + +#endif /* !CONFIG_PPC_PMAC */ + #ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE static void pmz_console_write(struct console *con, const char *s, unsigned int count); @@ -1896,28 +1989,41 @@ err_out: return rc; } +#ifdef CONFIG_PPC_PMAC + static struct of_device_id pmz_match[] = { { - .name = "ch-a", + .name = "ch-a", }, { - .name = "ch-b", + .name = "ch-b", }, {}, }; MODULE_DEVICE_TABLE (of, pmz_match); -static struct macio_driver pmz_driver = -{ +static struct macio_driver pmz_driver = { .name = "pmac_zilog", .match_table = pmz_match, .probe = pmz_attach, .remove = pmz_detach, .suspend = pmz_suspend, - .resume = pmz_resume, + .resume = pmz_resume, }; +#else + +static struct platform_driver pmz_driver = { + .remove = __exit_p(pmz_detach), + .driver = { + .name = "scc", + .owner = THIS_MODULE, + }, +}; + +#endif /* !CONFIG_PPC_PMAC */ + static int __init init_pmz(void) { int rc, i; @@ -1952,19 +2058,27 @@ static int __init init_pmz(void) pmz_dispose_port(&pmz_ports[i]); return rc; } - + /* * Then we register the macio driver itself */ +#ifdef CONFIG_PPC_PMAC return macio_register_driver(&pmz_driver); +#else + return platform_driver_probe(&pmz_driver, pmz_attach); +#endif } static void __exit exit_pmz(void) { int i; +#ifdef CONFIG_PPC_PMAC /* Get rid of macio-driver (detach from macio) */ macio_unregister_driver(&pmz_driver); +#else + platform_driver_unregister(&pmz_driver); +#endif for (i = 0; i < pmz_ports_count; i++) { struct uart_pmac_port *uport = &pmz_ports[i]; @@ -2031,10 +2145,10 @@ static int __init pmz_console_setup(struct console *co, char *options) /* * XServe's default to 57600 bps */ - if (machine_is_compatible("RackMac1,1") - || machine_is_compatible("RackMac1,2") - || machine_is_compatible("MacRISC4")) - baud = 57600; + if (of_machine_is_compatible("RackMac1,1") + || of_machine_is_compatible("RackMac1,2") + || of_machine_is_compatible("MacRISC4")) + baud = 57600; /* * Check whether an invalid uart number has been specified, and |