aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/scsi_lib.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/scsi_lib.c')
-rw-r--r--drivers/scsi/scsi_lib.c142
1 files changed, 73 insertions, 69 deletions
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 532304d42f00..7456a26aef51 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -194,7 +194,7 @@ void scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
* @bufflen: len of buffer
* @sense: optional sense buffer
* @sshdr: optional decoded sense header
- * @timeout: request timeout in seconds
+ * @timeout: request timeout in HZ
* @retries: number of times to retry request
* @flags: flags for ->cmd_flags
* @rq_flags: flags for ->rq_flags
@@ -211,20 +211,23 @@ int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
{
struct request *req;
struct scsi_request *rq;
- int ret = DRIVER_ERROR << 24;
+ int ret;
req = blk_get_request(sdev->request_queue,
data_direction == DMA_TO_DEVICE ?
- REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN,
+ REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
rq_flags & RQF_PM ? BLK_MQ_REQ_PM : 0);
if (IS_ERR(req))
- return ret;
- rq = scsi_req(req);
+ return PTR_ERR(req);
- if (bufflen && blk_rq_map_kern(sdev->request_queue, req,
- buffer, bufflen, GFP_NOIO))
- goto out;
+ rq = scsi_req(req);
+ if (bufflen) {
+ ret = blk_rq_map_kern(sdev->request_queue, req,
+ buffer, bufflen, GFP_NOIO);
+ if (ret)
+ goto out;
+ }
rq->cmd_len = COMMAND_SIZE(cmd[0]);
memcpy(rq->cmd, cmd, rq->cmd_len);
rq->retries = retries;
@@ -540,7 +543,7 @@ static bool scsi_end_request(struct request *req, blk_status_t error,
if (blk_queue_add_random(q))
add_disk_randomness(req->rq_disk);
- if (!blk_rq_is_scsi(req)) {
+ if (!blk_rq_is_passthrough(req)) {
WARN_ON_ONCE(!(cmd->flags & SCMD_INITIALIZED));
cmd->flags &= ~SCMD_INITIALIZED;
}
@@ -588,12 +591,7 @@ static blk_status_t scsi_result_to_blk_status(struct scsi_cmnd *cmd, int result)
{
switch (host_byte(result)) {
case DID_OK:
- /*
- * Also check the other bytes than the status byte in result
- * to handle the case when a SCSI LLD sets result to
- * DRIVER_SENSE << 24 without setting SAM_STAT_CHECK_CONDITION.
- */
- if (scsi_status_is_good(result) && (result & ~0xff) == 0)
+ if (scsi_status_is_good(result))
return BLK_STS_OK;
return BLK_STS_IOERR;
case DID_TRANSPORT_FAILFAST:
@@ -728,6 +726,7 @@ static void scsi_io_completion_action(struct scsi_cmnd *cmd, int result)
case 0x07: /* operation in progress */
case 0x08: /* Long write in progress */
case 0x09: /* self test in progress */
+ case 0x11: /* notify (enable spinup) required */
case 0x14: /* space allocation in progress */
case 0x1a: /* start stop unit in progress */
case 0x1b: /* sanitize in progress */
@@ -787,7 +786,7 @@ static void scsi_io_completion_action(struct scsi_cmnd *cmd, int result)
*/
if (!level && __ratelimit(&_rs)) {
scsi_print_result(cmd, NULL, FAILED);
- if (driver_byte(result) == DRIVER_SENSE)
+ if (sense_valid)
scsi_print_sense(cmd);
scsi_print_command(cmd);
}
@@ -875,7 +874,7 @@ static int scsi_io_completion_nz_result(struct scsi_cmnd *cmd, int result,
* if it can't fit). Treat SAM_STAT_CONDITION_MET and the related
* intermediate statuses (both obsolete in SAM-4) as good.
*/
- if (status_byte(result) && scsi_status_is_good(result)) {
+ if ((result & 0xff) && scsi_status_is_good(result)) {
result = 0;
*blk_statp = BLK_STS_OK;
}
@@ -1115,7 +1114,7 @@ void scsi_init_command(struct scsi_device *dev, struct scsi_cmnd *cmd)
bool in_flight;
int budget_token = cmd->budget_token;
- if (!blk_rq_is_scsi(rq) && !(flags & SCMD_INITIALIZED)) {
+ if (!blk_rq_is_passthrough(rq) && !(flags & SCMD_INITIALIZED)) {
flags |= SCMD_INITIALIZED;
scsi_initialize_rq(rq);
}
@@ -1556,7 +1555,7 @@ static blk_status_t scsi_prepare_cmd(struct request *req)
* Special handling for passthrough commands, which don't go to the ULP
* at all:
*/
- if (blk_rq_is_scsi(req))
+ if (blk_rq_is_passthrough(req))
return scsi_setup_scsi_cmnd(sdev, req);
if (sdev->handler && sdev->handler->prep_fn) {
@@ -1899,18 +1898,6 @@ static const struct blk_mq_ops scsi_mq_ops = {
.get_rq_budget_token = scsi_mq_get_rq_budget_token,
};
-struct request_queue *scsi_mq_alloc_queue(struct scsi_device *sdev)
-{
- sdev->request_queue = blk_mq_init_queue(&sdev->host->tag_set);
- if (IS_ERR(sdev->request_queue))
- return NULL;
-
- sdev->request_queue->queuedata = sdev;
- __scsi_init_queue(sdev->host, sdev->request_queue);
- blk_queue_flag_set(QUEUE_FLAG_SCSI_PASSTHROUGH, sdev->request_queue);
- return sdev->request_queue;
-}
-
int scsi_mq_setup_tags(struct Scsi_Host *shost)
{
unsigned int cmd_size, sgl_size;
@@ -2093,9 +2080,7 @@ EXPORT_SYMBOL_GPL(scsi_mode_select);
* @sshdr: place to put sense data (or NULL if no sense to be collected).
* must be SCSI_SENSE_BUFFERSIZE big.
*
- * Returns zero if unsuccessful, or the header offset (either 4
- * or 8 depending on whether a six or ten byte command was
- * issued) if successful.
+ * Returns zero if successful, or a negative error number on failure
*/
int
scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
@@ -2142,58 +2127,60 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len,
sshdr, timeout, retries, NULL);
+ if (result < 0)
+ return result;
/* This code looks awful: what it's doing is making sure an
* ILLEGAL REQUEST sense return identifies the actual command
* byte as the problem. MODE_SENSE commands can return
* ILLEGAL REQUEST if the code page isn't supported */
- if (use_10_for_ms && !scsi_status_is_good(result) &&
- driver_byte(result) == DRIVER_SENSE) {
+ if (!scsi_status_is_good(result)) {
if (scsi_sense_valid(sshdr)) {
if ((sshdr->sense_key == ILLEGAL_REQUEST) &&
(sshdr->asc == 0x20) && (sshdr->ascq == 0)) {
/*
* Invalid command operation code
*/
- sdev->use_10_for_ms = 0;
+ if (use_10_for_ms) {
+ sdev->use_10_for_ms = 0;
+ goto retry;
+ }
+ }
+ if (scsi_status_is_check_condition(result) &&
+ sshdr->sense_key == UNIT_ATTENTION &&
+ retry_count) {
+ retry_count--;
goto retry;
}
}
+ return -EIO;
+ }
+ if (unlikely(buffer[0] == 0x86 && buffer[1] == 0x0b &&
+ (modepage == 6 || modepage == 8))) {
+ /* Initio breakage? */
+ header_length = 0;
+ data->length = 13;
+ data->medium_type = 0;
+ data->device_specific = 0;
+ data->longlba = 0;
+ data->block_descriptor_length = 0;
+ } else if (use_10_for_ms) {
+ data->length = buffer[0]*256 + buffer[1] + 2;
+ data->medium_type = buffer[2];
+ data->device_specific = buffer[3];
+ data->longlba = buffer[4] & 0x01;
+ data->block_descriptor_length = buffer[6]*256
+ + buffer[7];
+ } else {
+ data->length = buffer[0] + 1;
+ data->medium_type = buffer[1];
+ data->device_specific = buffer[2];
+ data->block_descriptor_length = buffer[3];
}
+ data->header_length = header_length;
- if (scsi_status_is_good(result)) {
- if (unlikely(buffer[0] == 0x86 && buffer[1] == 0x0b &&
- (modepage == 6 || modepage == 8))) {
- /* Initio breakage? */
- header_length = 0;
- data->length = 13;
- data->medium_type = 0;
- data->device_specific = 0;
- data->longlba = 0;
- data->block_descriptor_length = 0;
- } else if (use_10_for_ms) {
- data->length = buffer[0]*256 + buffer[1] + 2;
- data->medium_type = buffer[2];
- data->device_specific = buffer[3];
- data->longlba = buffer[4] & 0x01;
- data->block_descriptor_length = buffer[6]*256
- + buffer[7];
- } else {
- data->length = buffer[0] + 1;
- data->medium_type = buffer[1];
- data->device_specific = buffer[2];
- data->block_descriptor_length = buffer[3];
- }
- data->header_length = header_length;
- } else if ((status_byte(result) == CHECK_CONDITION) &&
- scsi_sense_valid(sshdr) &&
- sshdr->sense_key == UNIT_ATTENTION && retry_count) {
- retry_count--;
- goto retry;
- }
-
- return result;
+ return 0;
}
EXPORT_SYMBOL(scsi_mode_sense);
@@ -3218,3 +3205,20 @@ int scsi_vpd_tpg_id(struct scsi_device *sdev, int *rel_id)
return group_id;
}
EXPORT_SYMBOL(scsi_vpd_tpg_id);
+
+/**
+ * scsi_build_sense - build sense data for a command
+ * @scmd: scsi command for which the sense should be formatted
+ * @desc: Sense format (non-zero == descriptor format,
+ * 0 == fixed format)
+ * @key: Sense key
+ * @asc: Additional sense code
+ * @ascq: Additional sense code qualifier
+ *
+ **/
+void scsi_build_sense(struct scsi_cmnd *scmd, int desc, u8 key, u8 asc, u8 ascq)
+{
+ scsi_build_sense_buffer(desc, scmd->sense_buffer, key, asc, ascq);
+ scmd->result = SAM_STAT_CHECK_CONDITION;
+}
+EXPORT_SYMBOL_GPL(scsi_build_sense);