diff options
Diffstat (limited to 'drivers/regulator/stm32-pwr.c')
| -rw-r--r-- | drivers/regulator/stm32-pwr.c | 186 |
1 files changed, 186 insertions, 0 deletions
diff --git a/drivers/regulator/stm32-pwr.c b/drivers/regulator/stm32-pwr.c new file mode 100644 index 000000000000..e0e627b0106e --- /dev/null +++ b/drivers/regulator/stm32-pwr.c @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) STMicroelectronics 2019 +// Authors: Gabriel Fernandez <[email protected]> +// Pascal Paillet <[email protected]>. + +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> + +/* + * Registers description + */ +#define REG_PWR_CR3 0x0C + +#define USB_3_3_EN BIT(24) +#define USB_3_3_RDY BIT(26) +#define REG_1_8_EN BIT(28) +#define REG_1_8_RDY BIT(29) +#define REG_1_1_EN BIT(30) +#define REG_1_1_RDY BIT(31) + +/* list of supported regulators */ +enum { + PWR_REG11, + PWR_REG18, + PWR_USB33, + STM32PWR_REG_NUM_REGS +}; + +static u32 ready_mask_table[STM32PWR_REG_NUM_REGS] = { + [PWR_REG11] = REG_1_1_RDY, + [PWR_REG18] = REG_1_8_RDY, + [PWR_USB33] = USB_3_3_RDY, +}; + +struct stm32_pwr_reg { + void __iomem *base; + u32 ready_mask; +}; + +static int stm32_pwr_reg_is_ready(struct regulator_dev *rdev) +{ + struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev); + u32 val; + + val = readl_relaxed(priv->base + REG_PWR_CR3); + + return (val & priv->ready_mask); +} + +static int stm32_pwr_reg_is_enabled(struct regulator_dev *rdev) +{ + struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev); + u32 val; + + val = readl_relaxed(priv->base + REG_PWR_CR3); + + return (val & rdev->desc->enable_mask); +} + +static int stm32_pwr_reg_enable(struct regulator_dev *rdev) +{ + struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev); + int ret; + u32 val; + + val = readl_relaxed(priv->base + REG_PWR_CR3); + val |= rdev->desc->enable_mask; + writel_relaxed(val, priv->base + REG_PWR_CR3); + + /* use an arbitrary timeout of 20ms */ + ret = readx_poll_timeout(stm32_pwr_reg_is_ready, rdev, val, val, + 100, 20 * 1000); + if (ret) + dev_err(&rdev->dev, "regulator enable timed out!\n"); + + return ret; +} + +static int stm32_pwr_reg_disable(struct regulator_dev *rdev) +{ + struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev); + int ret; + u32 val; + + val = readl_relaxed(priv->base + REG_PWR_CR3); + val &= ~rdev->desc->enable_mask; + writel_relaxed(val, priv->base + REG_PWR_CR3); + + /* use an arbitrary timeout of 20ms */ + ret = readx_poll_timeout(stm32_pwr_reg_is_ready, rdev, val, !val, + 100, 20 * 1000); + if (ret) + dev_err(&rdev->dev, "regulator disable timed out!\n"); + + return ret; +} + +static const struct regulator_ops stm32_pwr_reg_ops = { + .enable = stm32_pwr_reg_enable, + .disable = stm32_pwr_reg_disable, + .is_enabled = stm32_pwr_reg_is_enabled, +}; + +#define PWR_REG(_id, _name, _volt, _en, _supply) \ + [_id] = { \ + .id = _id, \ + .name = _name, \ + .of_match = of_match_ptr(_name), \ + .n_voltages = 1, \ + .type = REGULATOR_VOLTAGE, \ + .fixed_uV = _volt, \ + .ops = &stm32_pwr_reg_ops, \ + .enable_mask = _en, \ + .owner = THIS_MODULE, \ + .supply_name = _supply, \ + } \ + +static const struct regulator_desc stm32_pwr_desc[] = { + PWR_REG(PWR_REG11, "reg11", 1100000, REG_1_1_EN, "vdd"), + PWR_REG(PWR_REG18, "reg18", 1800000, REG_1_8_EN, "vdd"), + PWR_REG(PWR_USB33, "usb33", 3300000, USB_3_3_EN, "vdd_3v3_usbfs"), +}; + +static int stm32_pwr_regulator_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct stm32_pwr_reg *priv; + void __iomem *base; + struct regulator_dev *rdev; + struct regulator_config config = { }; + int i, ret = 0; + + base = of_iomap(np, 0); + if (!base) { + dev_err(&pdev->dev, "Unable to map IO memory\n"); + return -ENOMEM; + } + + config.dev = &pdev->dev; + + for (i = 0; i < STM32PWR_REG_NUM_REGS; i++) { + priv = devm_kzalloc(&pdev->dev, sizeof(struct stm32_pwr_reg), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + priv->base = base; + priv->ready_mask = ready_mask_table[i]; + config.driver_data = priv; + + rdev = devm_regulator_register(&pdev->dev, + &stm32_pwr_desc[i], + &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(&pdev->dev, + "Failed to register regulator: %d\n", ret); + break; + } + } + return ret; +} + +static const struct of_device_id stm32_pwr_of_match[] = { + { .compatible = "st,stm32mp1,pwr-reg", }, + {}, +}; +MODULE_DEVICE_TABLE(of, stm32_pwr_of_match); + +static struct platform_driver stm32_pwr_driver = { + .probe = stm32_pwr_regulator_probe, + .driver = { + .name = "stm32-pwr-regulator", + .of_match_table = of_match_ptr(stm32_pwr_of_match), + }, +}; +module_platform_driver(stm32_pwr_driver); + +MODULE_DESCRIPTION("STM32MP1 PWR voltage regulator driver"); +MODULE_AUTHOR("Pascal Paillet <[email protected]>"); +MODULE_LICENSE("GPL v2"); |