1 files changed, 17 insertions, 20 deletions

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 68473d0cc57e..c894cf0d8a28 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * core.c  --  Voltage/Current Regulator framework.
  *
@@ -5,12 +6,6 @@
  * Copyright 2008 SlimLogic Ltd.
  *
  * Author: Liam Girdwood <[email protected]>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
  */
 
 #include <linux/kernel.h>
@@ -1339,9 +1334,7 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		 * We'll only apply the initial system load if an
 		 * initial mode wasn't specified.
 		 */
-		regulator_lock(rdev);
 		drms_uA_update(rdev);
-		regulator_unlock(rdev);
 	}
 
 	if ((rdev->constraints->ramp_delay || rdev->constraints->ramp_disable)
@@ -2256,6 +2249,7 @@ static void regulator_ena_gpio_free(struct regulator_dev *rdev)
 		if (pin->gpiod == rdev->ena_pin->gpiod) {
 			if (pin->request_count <= 1) {
 				pin->request_count = 0;
+				gpiod_put(pin->gpiod);
 				list_del(&pin->list);
 				kfree(pin);
 				rdev->ena_pin = NULL;
@@ -3004,7 +2998,7 @@ EXPORT_SYMBOL_GPL(regulator_get_linear_step);
  * @min_uV: Minimum required voltage in uV.
  * @max_uV: Maximum required voltage in uV.
  *
- * Returns a boolean or a negative error code.
+ * Returns a boolean.
  */
 int regulator_is_supported_voltage(struct regulator *regulator,
 				   int min_uV, int max_uV)
@@ -3028,7 +3022,7 @@ int regulator_is_supported_voltage(struct regulator *regulator,
 
 	ret = regulator_count_voltages(regulator);
 	if (ret < 0)
-		return ret;
+		return 0;
 	voltages = ret;
 
 	for (i = 0; i < voltages; i++) {
@@ -3322,15 +3316,12 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
 
 	/* for not coupled regulators this will just set the voltage */
 	ret = regulator_balance_voltage(rdev, state);
-	if (ret < 0)
-		goto out2;
+	if (ret < 0) {
+		voltage->min_uV = old_min_uV;
+		voltage->max_uV = old_max_uV;
+	}
 
 out:
-	return 0;
-out2:
-	voltage->min_uV = old_min_uV;
-	voltage->max_uV = old_max_uV;
-
 	return ret;
 }
 
@@ -4347,8 +4338,6 @@ int regulator_bulk_get(struct device *dev, int num_consumers,
 						      consumers[i].supply);
 		if (IS_ERR(consumers[i].consumer)) {
 			ret = PTR_ERR(consumers[i].consumer);
-			dev_err(dev, "Failed to get supply '%s': %d\n",
-				consumers[i].supply, ret);
 			consumers[i].consumer = NULL;
 			goto err;
 		}
@@ -4357,6 +4346,13 @@ int regulator_bulk_get(struct device *dev, int num_consumers,
 	return 0;
 
 err:
+	if (ret != -EPROBE_DEFER)
+		dev_err(dev, "Failed to get supply '%s': %d\n",
+			consumers[i].supply, ret);
+	else
+		dev_dbg(dev, "Failed to get supply '%s', deferring\n",
+			consumers[i].supply);
+
 	while (--i >= 0)
 		regulator_put(consumers[i].consumer);
 
@@ -5064,10 +5060,11 @@ void regulator_unregister(struct regulator_dev *rdev)
 		regulator_put(rdev->supply);
 	}
 
+	flush_work(&rdev->disable_work.work);
+
 	mutex_lock(&regulator_list_mutex);
 
 	debugfs_remove_recursive(rdev->debugfs);
-	flush_work(&rdev->disable_work.work);
 	WARN_ON(rdev->open_count);
 	regulator_remove_coupling(rdev);
 	unset_regulator_supplies(rdev);