diff options
Diffstat (limited to 'drivers/platform')
| -rw-r--r-- | drivers/platform/goldfish/goldfish_pipe.c | 28 | ||||
| -rw-r--r-- | drivers/platform/surface/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/platform/surface/surface_gpe.c | 4 | ||||
| -rw-r--r-- | drivers/platform/x86/amd-pmc.c | 2 | ||||
| -rw-r--r-- | drivers/platform/x86/hp-wmi.c | 3 | ||||
| -rw-r--r-- | drivers/platform/x86/i2c-multi-instantiate.c | 31 | ||||
| -rw-r--r-- | drivers/platform/x86/ideapad-laptop.c | 15 | ||||
| -rw-r--r-- | drivers/platform/x86/intel-vbtn.c | 10 | ||||
| -rw-r--r-- | drivers/platform/x86/thinkpad_acpi.c | 5 | ||||
| -rw-r--r-- | drivers/platform/x86/touchscreen_dmi.c | 18 |
10 files changed, 83 insertions, 41 deletions
diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c index 1ab207ec9c94..b67539f9848c 100644 --- a/drivers/platform/goldfish/goldfish_pipe.c +++ b/drivers/platform/goldfish/goldfish_pipe.c @@ -212,9 +212,6 @@ struct goldfish_pipe_dev { int version; unsigned char __iomem *base; - /* an irq tasklet to run goldfish_interrupt_task */ - struct tasklet_struct irq_tasklet; - struct miscdevice miscdev; }; @@ -577,10 +574,10 @@ static struct goldfish_pipe *signalled_pipes_pop_front( return pipe; } -static void goldfish_interrupt_task(unsigned long dev_addr) +static irqreturn_t goldfish_interrupt_task(int irq, void *dev_addr) { /* Iterate over the signalled pipes and wake them one by one */ - struct goldfish_pipe_dev *dev = (struct goldfish_pipe_dev *)dev_addr; + struct goldfish_pipe_dev *dev = dev_addr; struct goldfish_pipe *pipe; int wakes; @@ -599,13 +596,14 @@ static void goldfish_interrupt_task(unsigned long dev_addr) */ wake_up_interruptible(&pipe->wake_queue); } + return IRQ_HANDLED; } static void goldfish_pipe_device_deinit(struct platform_device *pdev, struct goldfish_pipe_dev *dev); /* - * The general idea of the interrupt handling: + * The general idea of the (threaded) interrupt handling: * * 1. device raises an interrupt if there's at least one signalled pipe * 2. IRQ handler reads the signalled pipes and their count from the device @@ -614,8 +612,8 @@ static void goldfish_pipe_device_deinit(struct platform_device *pdev, * otherwise it leaves it raised, so IRQ handler will be called * again for the next chunk * 4. IRQ handler adds all returned pipes to the device's signalled pipes list - * 5. IRQ handler launches a tasklet to process the signalled pipes from the - * list in a separate context + * 5. IRQ handler defers processing the signalled pipes from the list in a + * separate context */ static irqreturn_t goldfish_pipe_interrupt(int irq, void *dev_id) { @@ -645,8 +643,7 @@ static irqreturn_t goldfish_pipe_interrupt(int irq, void *dev_id) spin_unlock_irqrestore(&dev->lock, flags); - tasklet_schedule(&dev->irq_tasklet); - return IRQ_HANDLED; + return IRQ_WAKE_THREAD; } static int get_free_pipe_id_locked(struct goldfish_pipe_dev *dev) @@ -811,12 +808,10 @@ static int goldfish_pipe_device_init(struct platform_device *pdev, { int err; - tasklet_init(&dev->irq_tasklet, &goldfish_interrupt_task, - (unsigned long)dev); - - err = devm_request_irq(&pdev->dev, dev->irq, - goldfish_pipe_interrupt, - IRQF_SHARED, "goldfish_pipe", dev); + err = devm_request_threaded_irq(&pdev->dev, dev->irq, + goldfish_pipe_interrupt, + goldfish_interrupt_task, + IRQF_SHARED, "goldfish_pipe", dev); if (err) { dev_err(&pdev->dev, "unable to allocate IRQ for v2\n"); return err; @@ -874,7 +869,6 @@ static void goldfish_pipe_device_deinit(struct platform_device *pdev, struct goldfish_pipe_dev *dev) { misc_deregister(&dev->miscdev); - tasklet_kill(&dev->irq_tasklet); kfree(dev->pipes); free_page((unsigned long)dev->buffers); } diff --git a/drivers/platform/surface/Kconfig b/drivers/platform/surface/Kconfig index 33040b0b3b79..2c941cdac9ee 100644 --- a/drivers/platform/surface/Kconfig +++ b/drivers/platform/surface/Kconfig @@ -5,6 +5,7 @@ menuconfig SURFACE_PLATFORMS bool "Microsoft Surface Platform-Specific Device Drivers" + depends on ACPI default y help Say Y here to get to see options for platform-specific device drivers @@ -29,20 +30,19 @@ config SURFACE3_WMI config SURFACE_3_BUTTON tristate "Power/home/volume buttons driver for Microsoft Surface 3 tablet" - depends on ACPI && KEYBOARD_GPIO && I2C + depends on KEYBOARD_GPIO && I2C help This driver handles the power/home/volume buttons on the Microsoft Surface 3 tablet. config SURFACE_3_POWER_OPREGION tristate "Surface 3 battery platform operation region support" - depends on ACPI && I2C + depends on I2C help This driver provides support for ACPI operation region of the Surface 3 battery platform driver. config SURFACE_GPE tristate "Surface GPE/Lid Support Driver" - depends on ACPI depends on DMI help This driver marks the GPEs related to the ACPI lid device found on @@ -52,7 +52,7 @@ config SURFACE_GPE config SURFACE_PRO3_BUTTON tristate "Power/home/volume buttons driver for Microsoft Surface Pro 3/4 tablet" - depends on ACPI && INPUT + depends on INPUT help This driver handles the power/home/volume buttons on the Microsoft Surface Pro 3/4 tablet. diff --git a/drivers/platform/surface/surface_gpe.c b/drivers/platform/surface/surface_gpe.c index e49e5d6d5d4e..86f6991b1215 100644 --- a/drivers/platform/surface/surface_gpe.c +++ b/drivers/platform/surface/surface_gpe.c @@ -181,12 +181,12 @@ static int surface_lid_enable_wakeup(struct device *dev, bool enable) return 0; } -static int surface_gpe_suspend(struct device *dev) +static int __maybe_unused surface_gpe_suspend(struct device *dev) { return surface_lid_enable_wakeup(dev, true); } -static int surface_gpe_resume(struct device *dev) +static int __maybe_unused surface_gpe_resume(struct device *dev) { return surface_lid_enable_wakeup(dev, false); } diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c index 0102bf1c7916..ef8342572463 100644 --- a/drivers/platform/x86/amd-pmc.c +++ b/drivers/platform/x86/amd-pmc.c @@ -85,7 +85,7 @@ static inline void amd_pmc_reg_write(struct amd_pmc_dev *dev, int reg_offset, u3 iowrite32(val, dev->regbase + reg_offset); } -#if CONFIG_DEBUG_FS +#ifdef CONFIG_DEBUG_FS static int smu_fw_info_show(struct seq_file *s, void *unused) { struct amd_pmc_dev *dev = s->private; diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index ecd477964d11..18bf8aeb5f87 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -247,7 +247,8 @@ static int hp_wmi_perform_query(int query, enum hp_wmi_command command, ret = bios_return->return_code; if (ret) { - if (ret != HPWMI_RET_UNKNOWN_CMDTYPE) + if (ret != HPWMI_RET_UNKNOWN_COMMAND && + ret != HPWMI_RET_UNKNOWN_CMDTYPE) pr_warn("query 0x%x returned error 0x%x\n", query, ret); goto out_free; } diff --git a/drivers/platform/x86/i2c-multi-instantiate.c b/drivers/platform/x86/i2c-multi-instantiate.c index b457b0babde3..2cce82579d09 100644 --- a/drivers/platform/x86/i2c-multi-instantiate.c +++ b/drivers/platform/x86/i2c-multi-instantiate.c @@ -164,13 +164,29 @@ static const struct i2c_inst_data bsg2150_data[] = { {} }; -static const struct i2c_inst_data int3515_data[] = { - { "tps6598x", IRQ_RESOURCE_APIC, 0 }, - { "tps6598x", IRQ_RESOURCE_APIC, 1 }, - { "tps6598x", IRQ_RESOURCE_APIC, 2 }, - { "tps6598x", IRQ_RESOURCE_APIC, 3 }, - {} -}; +/* + * Device with _HID INT3515 (TI PD controllers) has some unresolved interrupt + * issues. The most common problem seen is interrupt flood. + * + * There are at least two known causes. Firstly, on some boards, the + * I2CSerialBus resource index does not match the Interrupt resource, i.e. they + * are not one-to-one mapped like in the array below. Secondly, on some boards + * the IRQ line from the PD controller is not actually connected at all. But the + * interrupt flood is also seen on some boards where those are not a problem, so + * there are some other problems as well. + * + * Because of the issues with the interrupt, the device is disabled for now. If + * you wish to debug the issues, uncomment the below, and add an entry for the + * INT3515 device to the i2c_multi_instance_ids table. + * + * static const struct i2c_inst_data int3515_data[] = { + * { "tps6598x", IRQ_RESOURCE_APIC, 0 }, + * { "tps6598x", IRQ_RESOURCE_APIC, 1 }, + * { "tps6598x", IRQ_RESOURCE_APIC, 2 }, + * { "tps6598x", IRQ_RESOURCE_APIC, 3 }, + * { } + * }; + */ /* * Note new device-ids must also be added to i2c_multi_instantiate_ids in @@ -179,7 +195,6 @@ static const struct i2c_inst_data int3515_data[] = { static const struct acpi_device_id i2c_multi_inst_acpi_ids[] = { { "BSG1160", (unsigned long)bsg1160_data }, { "BSG2150", (unsigned long)bsg2150_data }, - { "INT3515", (unsigned long)int3515_data }, { } }; MODULE_DEVICE_TABLE(acpi, i2c_multi_inst_acpi_ids); diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 7598cd46cf60..5b81bafa5c16 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -92,6 +92,7 @@ struct ideapad_private { struct dentry *debug; unsigned long cfg; bool has_hw_rfkill_switch; + bool has_touchpad_switch; const char *fnesc_guid; }; @@ -535,7 +536,9 @@ static umode_t ideapad_is_visible(struct kobject *kobj, } else if (attr == &dev_attr_fn_lock.attr) { supported = acpi_has_method(priv->adev->handle, "HALS") && acpi_has_method(priv->adev->handle, "SALS"); - } else + } else if (attr == &dev_attr_touchpad.attr) + supported = priv->has_touchpad_switch; + else supported = true; return supported ? attr->mode : 0; @@ -867,6 +870,9 @@ static void ideapad_sync_touchpad_state(struct ideapad_private *priv) { unsigned long value; + if (!priv->has_touchpad_switch) + return; + /* Without reading from EC touchpad LED doesn't switch state */ if (!read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &value)) { /* Some IdeaPads don't really turn off touchpad - they only @@ -989,6 +995,9 @@ static int ideapad_acpi_add(struct platform_device *pdev) priv->platform_device = pdev; priv->has_hw_rfkill_switch = dmi_check_system(hw_rfkill_list); + /* Most ideapads with ELAN0634 touchpad don't use EC touchpad switch */ + priv->has_touchpad_switch = !acpi_dev_present("ELAN0634", NULL, -1); + ret = ideapad_sysfs_init(priv); if (ret) return ret; @@ -1006,6 +1015,10 @@ static int ideapad_acpi_add(struct platform_device *pdev) if (!priv->has_hw_rfkill_switch) write_ec_cmd(priv->adev->handle, VPCCMD_W_RF, 1); + /* The same for Touchpad */ + if (!priv->has_touchpad_switch) + write_ec_cmd(priv->adev->handle, VPCCMD_W_TOUCHPAD, 1); + for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) if (test_bit(ideapad_rfk_data[i].cfgbit, &priv->cfg)) ideapad_register_rfkill(priv, i); diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c index 3b49a1f4061b..30a9062d2b4b 100644 --- a/drivers/platform/x86/intel-vbtn.c +++ b/drivers/platform/x86/intel-vbtn.c @@ -207,19 +207,19 @@ static const struct dmi_system_id dmi_switches_allow_list[] = { { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP Stream x360 Convertible PC 11"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion 13 x360 PC"), }, }, { .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion 13 x360 PC"), + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Switch SA5-271"), }, }, { .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_NAME, "Switch SA5-271"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7352"), }, }, {} /* Array terminator */ diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index e03df2881dc6..f3e8eca8d86d 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -8783,6 +8783,7 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = { TPACPI_Q_LNV3('N', '1', 'T', TPACPI_FAN_2CTL), /* P71 */ TPACPI_Q_LNV3('N', '1', 'U', TPACPI_FAN_2CTL), /* P51 */ TPACPI_Q_LNV3('N', '2', 'C', TPACPI_FAN_2CTL), /* P52 / P72 */ + TPACPI_Q_LNV3('N', '2', 'N', TPACPI_FAN_2CTL), /* P53 / P73 */ TPACPI_Q_LNV3('N', '2', 'E', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (1st gen) */ TPACPI_Q_LNV3('N', '2', 'O', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (2nd gen) */ TPACPI_Q_LNV3('N', '2', 'V', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (3nd gen) */ @@ -9951,9 +9952,9 @@ static int tpacpi_proxsensor_init(struct ibm_init_struct *iibm) if ((palm_err == -ENODEV) && (lap_err == -ENODEV)) return 0; /* Otherwise, if there was an error return it */ - if (palm_err && (palm_err != ENODEV)) + if (palm_err && (palm_err != -ENODEV)) return palm_err; - if (lap_err && (lap_err != ENODEV)) + if (lap_err && (lap_err != -ENODEV)) return lap_err; if (has_palmsensor) { diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 5783139d0a11..c4de932302d6 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -263,6 +263,16 @@ static const struct ts_dmi_data digma_citi_e200_data = { .properties = digma_citi_e200_props, }; +static const struct property_entry estar_beauty_hd_props[] = { + PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), + { } +}; + +static const struct ts_dmi_data estar_beauty_hd_data = { + .acpi_name = "GDIX1001:00", + .properties = estar_beauty_hd_props, +}; + static const struct property_entry gp_electronic_t701_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 960), PROPERTY_ENTRY_U32("touchscreen-size-y", 640), @@ -943,6 +953,14 @@ const struct dmi_system_id touchscreen_dmi_table[] = { }, }, { + /* Estar Beauty HD (MID 7316R) */ + .driver_data = (void *)&estar_beauty_hd_data, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Estar"), + DMI_MATCH(DMI_PRODUCT_NAME, "eSTAR BEAUTY HD Intel Quad core"), + }, + }, + { /* GP-electronic T701 */ .driver_data = (void *)&gp_electronic_t701_data, .matches = { |