diff options
Diffstat (limited to 'drivers/platform/x86/x86-android-tablets/lenovo.c')
| -rw-r--r-- | drivers/platform/x86/x86-android-tablets/lenovo.c | 29 |
1 files changed, 13 insertions, 16 deletions
diff --git a/drivers/platform/x86/x86-android-tablets/lenovo.c b/drivers/platform/x86/x86-android-tablets/lenovo.c index 26a4ef670ad7..c1e68211283f 100644 --- a/drivers/platform/x86/x86-android-tablets/lenovo.c +++ b/drivers/platform/x86/x86-android-tablets/lenovo.c @@ -95,6 +95,7 @@ static const struct x86_i2c_client_info lenovo_yb1_x90_i2c_clients[] __initconst .index = 56, .trigger = ACPI_EDGE_SENSITIVE, .polarity = ACPI_ACTIVE_LOW, + .con_id = "goodix_ts_irq", }, }, { /* Wacom Digitizer in keyboard half */ @@ -111,6 +112,7 @@ static const struct x86_i2c_client_info lenovo_yb1_x90_i2c_clients[] __initconst .index = 49, .trigger = ACPI_LEVEL_SENSITIVE, .polarity = ACPI_ACTIVE_LOW, + .con_id = "wacom_irq", }, }, { /* LP8557 Backlight controller */ @@ -136,6 +138,7 @@ static const struct x86_i2c_client_info lenovo_yb1_x90_i2c_clients[] __initconst .index = 77, .trigger = ACPI_LEVEL_SENSITIVE, .polarity = ACPI_ACTIVE_LOW, + .con_id = "hideep_ts_irq", }, }, }; @@ -321,6 +324,7 @@ static struct x86_i2c_client_info lenovo_yoga_tab2_830_1050_i2c_clients[] __init .index = 2, .trigger = ACPI_EDGE_SENSITIVE, .polarity = ACPI_ACTIVE_HIGH, + .con_id = "bq24292i_irq", }, }, { /* BQ27541 fuel-gauge */ @@ -431,7 +435,8 @@ static int __init lenovo_yoga_tab2_830_1050_init_touchscreen(void) int ret; /* Use PMIC GPIO 10 bootstrap pin to differentiate 830 vs 1050 */ - ret = x86_android_tablet_get_gpiod("gpio_crystalcove", 10, &gpiod); + ret = x86_android_tablet_get_gpiod("gpio_crystalcove", 10, "yoga_bootstrap", + false, GPIOD_ASIS, &gpiod); if (ret) return ret; @@ -560,7 +565,6 @@ static const struct software_node fg_bq25890_1_supply_node = { /* bq25892 charger settings for the flat lipo battery behind the screen */ static const struct property_entry lenovo_yt3_bq25892_0_props[] = { PROPERTY_ENTRY_STRING_ARRAY("supplied-from", lenovo_yt3_bq25892_0_suppliers), - PROPERTY_ENTRY_STRING("linux,power-supply-name", "bq25892-second-chrg"), PROPERTY_ENTRY_U32("linux,iinlim-percentage", 40), PROPERTY_ENTRY_BOOL("linux,skip-reset"), /* Values taken from Android Factory Image */ @@ -615,6 +619,7 @@ static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = { .index = 5, .trigger = ACPI_EDGE_SENSITIVE, .polarity = ACPI_ACTIVE_LOW, + .con_id = "bq25892_0_irq", }, }, { /* bq27500 fuel-gauge for the round li-ion cells in the hinge */ @@ -640,6 +645,7 @@ static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = { .index = 77, .trigger = ACPI_LEVEL_SENSITIVE, .polarity = ACPI_ACTIVE_LOW, + .con_id = "hideep_ts_irq", }, }, { /* LP8557 Backlight controller */ @@ -655,7 +661,6 @@ static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = { static int __init lenovo_yt3_init(void) { - struct gpio_desc *gpiod; int ret; /* @@ -665,31 +670,23 @@ static int __init lenovo_yt3_init(void) * * The bq25890_charger driver controls these through I2C, but this only * works if not overridden by the pins. Set these pins here: - * 1. Set /CE to 0 to allow charging. + * 1. Set /CE to 1 to allow charging. * 2. Set OTG to 0 disable V5 boost output since the 5V boost output of * the main "bq25892_1" charger is used when necessary. */ /* /CE pin */ - ret = x86_android_tablet_get_gpiod("INT33FF:02", 22, &gpiod); + ret = x86_android_tablet_get_gpiod("INT33FF:02", 22, "bq25892_0_ce", + true, GPIOD_OUT_HIGH, NULL); if (ret < 0) return ret; - /* - * The gpio_desc returned by x86_android_tablet_get_gpiod() is a "raw" - * gpio_desc, that is there is no way to pass lookup-flags like - * GPIO_ACTIVE_LOW. Set the GPIO to 0 here to enable charging since - * the /CE pin is active-low, but not marked as such in the gpio_desc. - */ - gpiod_set_value(gpiod, 0); - /* OTG pin */ - ret = x86_android_tablet_get_gpiod("INT33FF:03", 19, &gpiod); + ret = x86_android_tablet_get_gpiod("INT33FF:03", 19, "bq25892_0_otg", + false, GPIOD_OUT_LOW, NULL); if (ret < 0) return ret; - gpiod_set_value(gpiod, 0); - /* Enable the regulators used by the touchscreen */ intel_soc_pmic_exec_mipi_pmic_seq_element(0x6e, 0x9b, 0x02, 0xff); intel_soc_pmic_exec_mipi_pmic_seq_element(0x6e, 0xa0, 0x02, 0xff); |