diff options
Diffstat (limited to 'drivers/phy/samsung/phy-exynos5-usbdrd.c')
| -rw-r--r-- | drivers/phy/samsung/phy-exynos5-usbdrd.c | 1053 |
1 files changed, 869 insertions, 184 deletions
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c index 04171eed5b16..df52b78a120b 100644 --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c @@ -8,6 +8,7 @@ * Author: Vivek Gautam <gautam.vivek@samsung.com> */ +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> @@ -30,18 +31,16 @@ #define EXYNOS5_FSEL_19MHZ2 0x3 #define EXYNOS5_FSEL_20MHZ 0x4 #define EXYNOS5_FSEL_24MHZ 0x5 -#define EXYNOS5_FSEL_26MHZ 0x82 +#define EXYNOS5_FSEL_26MHZ 0x6 #define EXYNOS5_FSEL_50MHZ 0x7 /* Exynos5: USB 3.0 DRD PHY registers */ #define EXYNOS5_DRD_LINKSYSTEM 0x04 - +#define LINKSYSTEM_XHCI_VERSION_CONTROL BIT(27) #define LINKSYSTEM_FLADJ_MASK (0x3f << 1) #define LINKSYSTEM_FLADJ(_x) ((_x) << 1) -#define LINKSYSTEM_XHCI_VERSION_CONTROL BIT(27) #define EXYNOS5_DRD_PHYUTMI 0x08 - #define PHYUTMI_OTGDISABLE BIT(6) #define PHYUTMI_FORCESUSPEND BIT(1) #define PHYUTMI_FORCESLEEP BIT(0) @@ -49,40 +48,31 @@ #define EXYNOS5_DRD_PHYPIPE 0x0c #define EXYNOS5_DRD_PHYCLKRST 0x10 - #define PHYCLKRST_EN_UTMISUSPEND BIT(31) - #define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23) #define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23) - #define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21) #define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21) - #define PHYCLKRST_SSC_EN BIT(20) #define PHYCLKRST_REF_SSP_EN BIT(19) #define PHYCLKRST_REF_CLKDIV2 BIT(18) - #define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11) #define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11) #define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x32 << 11) #define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11) #define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11) #define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11) - -#define PHYCLKRST_FSEL_UTMI_MASK (0x7 << 5) #define PHYCLKRST_FSEL_PIPE_MASK (0x7 << 8) +#define PHYCLKRST_FSEL_UTMI_MASK (0x7 << 5) #define PHYCLKRST_FSEL(_x) ((_x) << 5) #define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5) #define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5) #define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5) #define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5) - #define PHYCLKRST_RETENABLEN BIT(4) - #define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2) #define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2) #define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2) - #define PHYCLKRST_PORTRESET BIT(1) #define PHYCLKRST_COMMONONN BIT(0) @@ -100,30 +90,27 @@ #define PHYREG1_CR_ACK BIT(0) #define EXYNOS5_DRD_PHYPARAM0 0x1c - #define PHYPARAM0_REF_USE_PAD BIT(31) #define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26) #define PHYPARAM0_REF_LOSLEVEL (0x9 << 26) #define EXYNOS5_DRD_PHYPARAM1 0x20 - #define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0) #define PHYPARAM1_PCS_TXDEEMPH (0x1c) #define EXYNOS5_DRD_PHYTERM 0x24 #define EXYNOS5_DRD_PHYTEST 0x28 - #define PHYTEST_POWERDOWN_SSP BIT(3) #define PHYTEST_POWERDOWN_HSP BIT(2) #define EXYNOS5_DRD_PHYADP 0x2c #define EXYNOS5_DRD_PHYUTMICLKSEL 0x30 - #define PHYUTMICLKSEL_UTMI_CLKSEL BIT(2) #define EXYNOS5_DRD_PHYRESUME 0x34 + #define EXYNOS5_DRD_LINKPORT 0x44 /* USB 3.0 DRD PHY SS Function Control Reg; accessed by CR_PORT */ @@ -147,35 +134,215 @@ /* Exynos850: USB DRD PHY registers */ #define EXYNOS850_DRD_LINKCTRL 0x04 -#define LINKCTRL_BUS_FILTER_BYPASS(_x) ((_x) << 4) +#define LINKCTRL_FORCE_RXELECIDLE BIT(18) +#define LINKCTRL_FORCE_PHYSTATUS BIT(17) +#define LINKCTRL_FORCE_PIPE_EN BIT(16) #define LINKCTRL_FORCE_QACT BIT(8) +#define LINKCTRL_BUS_FILTER_BYPASS(_x) ((_x) << 4) + +#define EXYNOS850_DRD_LINKPORT 0x08 +#define LINKPORT_HOST_NUM_U3 GENMASK(19, 16) +#define LINKPORT_HOST_NUM_U2 GENMASK(15, 12) #define EXYNOS850_DRD_CLKRST 0x20 -#define CLKRST_LINK_SW_RST BIT(0) -#define CLKRST_PORT_RST BIT(1) +/* + * On versions without SS ports (like E850), bit 3 is for the 2.0 phy (HS), + * while on versions with (like gs101), bits 2 and 3 are for the 3.0 phy (SS) + * and bits 12 & 13 for the 2.0 phy. + */ +#define CLKRST_PHY20_SW_POR BIT(13) +#define CLKRST_PHY20_SW_POR_SEL BIT(12) +#define CLKRST_LINK_PCLK_SEL BIT(7) #define CLKRST_PHY_SW_RST BIT(3) +#define CLKRST_PHY_RESET_SEL BIT(2) +#define CLKRST_PORT_RST BIT(1) +#define CLKRST_LINK_SW_RST BIT(0) + +#define EXYNOS850_DRD_SSPPLLCTL 0x30 +#define SSPPLLCTL_FSEL GENMASK(2, 0) #define EXYNOS850_DRD_UTMI 0x50 -#define UTMI_FORCE_SLEEP BIT(0) -#define UTMI_FORCE_SUSPEND BIT(1) -#define UTMI_DM_PULLDOWN BIT(2) -#define UTMI_DP_PULLDOWN BIT(3) -#define UTMI_FORCE_BVALID BIT(4) #define UTMI_FORCE_VBUSVALID BIT(5) +#define UTMI_FORCE_BVALID BIT(4) +#define UTMI_DP_PULLDOWN BIT(3) +#define UTMI_DM_PULLDOWN BIT(2) +#define UTMI_FORCE_SUSPEND BIT(1) +#define UTMI_FORCE_SLEEP BIT(0) #define EXYNOS850_DRD_HSP 0x54 -#define HSP_COMMONONN BIT(8) -#define HSP_EN_UTMISUSPEND BIT(9) -#define HSP_VBUSVLDEXT BIT(12) -#define HSP_VBUSVLDEXTSEL BIT(13) #define HSP_FSV_OUT_EN BIT(24) +#define HSP_VBUSVLDEXTSEL BIT(13) +#define HSP_VBUSVLDEXT BIT(12) +#define HSP_EN_UTMISUSPEND BIT(9) +#define HSP_COMMONONN BIT(8) + +#define EXYNOS850_DRD_HSPPARACON 0x58 +#define HSPPARACON_TXVREF GENMASK(31, 28) +#define HSPPARACON_TXRISE GENMASK(25, 24) +#define HSPPARACON_TXRES GENMASK(22, 21) +#define HSPPARACON_TXPREEMPPULSE BIT(20) +#define HSPPARACON_TXPREEMPAMP GENMASK(19, 18) +#define HSPPARACON_TXHSXV GENMASK(17, 16) +#define HSPPARACON_TXFSLS GENMASK(15, 12) +#define HSPPARACON_SQRX GENMASK(10, 8) +#define HSPPARACON_OTG GENMASK(6, 4) +#define HSPPARACON_COMPDIS GENMASK(2, 0) #define EXYNOS850_DRD_HSP_TEST 0x5c #define HSP_TEST_SIDDQ BIT(24) +/* Exynos9 - GS101 */ +#define EXYNOS850_DRD_SECPMACTL 0x48 +#define SECPMACTL_PMA_ROPLL_REF_CLK_SEL GENMASK(13, 12) +#define SECPMACTL_PMA_LCPLL_REF_CLK_SEL GENMASK(11, 10) +#define SECPMACTL_PMA_REF_FREQ_SEL GENMASK(9, 8) +#define SECPMACTL_PMA_LOW_PWR BIT(4) +#define SECPMACTL_PMA_TRSV_SW_RST BIT(3) +#define SECPMACTL_PMA_CMN_SW_RST BIT(2) +#define SECPMACTL_PMA_INIT_SW_RST BIT(1) +#define SECPMACTL_PMA_APB_SW_RST BIT(0) + +/* PMA registers */ +#define EXYNOS9_PMA_USBDP_CMN_REG0008 0x0020 +#define CMN_REG0008_OVRD_AUX_EN BIT(3) +#define CMN_REG0008_AUX_EN BIT(2) + +#define EXYNOS9_PMA_USBDP_CMN_REG00B8 0x02e0 +#define CMN_REG00B8_LANE_MUX_SEL_DP GENMASK(3, 0) + +#define EXYNOS9_PMA_USBDP_CMN_REG01C0 0x0700 +#define CMN_REG01C0_ANA_LCPLL_LOCK_DONE BIT(7) +#define CMN_REG01C0_ANA_LCPLL_AFC_DONE BIT(6) + +/* these have similar register layout, for lanes 0 and 2 */ +#define EXYNOS9_PMA_USBDP_TRSV_REG03C3 0x0f0c +#define EXYNOS9_PMA_USBDP_TRSV_REG07C3 0x1f0c +#define TRSV_REG03C3_LN0_MON_RX_CDR_AFC_DONE BIT(3) +#define TRSV_REG03C3_LN0_MON_RX_CDR_CAL_DONE BIT(2) +#define TRSV_REG03C3_LN0_MON_RX_CDR_FLD_PLL_MODE_DONE BIT(1) +#define TRSV_REG03C3_LN0_MON_RX_CDR_LOCK_DONE BIT(0) + +/* TRSV_REG0413 and TRSV_REG0813 have similar register layout */ +#define EXYNOS9_PMA_USBDP_TRSV_REG0413 0x104c +#define TRSV_REG0413_OVRD_LN1_TX_RXD_COMP_EN BIT(7) +#define TRSV_REG0413_OVRD_LN1_TX_RXD_EN BIT(5) + +#define EXYNOS9_PMA_USBDP_TRSV_REG0813 0x204c +#define TRSV_REG0813_OVRD_LN3_TX_RXD_COMP_EN BIT(7) +#define TRSV_REG0813_OVRD_LN3_TX_RXD_EN BIT(5) + +/* PCS registers */ +#define EXYNOS9_PCS_NS_VEC_PS1_N1 0x010c +#define EXYNOS9_PCS_NS_VEC_PS2_N0 0x0110 +#define EXYNOS9_PCS_NS_VEC_PS3_N0 0x0118 +#define NS_VEC_NS_REQ GENMASK(31, 24) +#define NS_VEC_ENABLE_TIMER BIT(22) +#define NS_VEC_SEL_TIMEOUT GENMASK(21, 20) +#define NS_VEC_INV_MASK GENMASK(19, 16) +#define NS_VEC_COND_MASK GENMASK(11, 8) +#define NS_VEC_EXP_COND GENMASK(3, 0) + +#define EXYNOS9_PCS_OUT_VEC_2 0x014c +#define EXYNOS9_PCS_OUT_VEC_3 0x0150 +#define PCS_OUT_VEC_B9_DYNAMIC BIT(19) +#define PCS_OUT_VEC_B9_SEL_OUT BIT(18) +#define PCS_OUT_VEC_B8_DYNAMIC BIT(17) +#define PCS_OUT_VEC_B8_SEL_OUT BIT(16) +#define PCS_OUT_VEC_B7_DYNAMIC BIT(15) +#define PCS_OUT_VEC_B7_SEL_OUT BIT(14) +#define PCS_OUT_VEC_B6_DYNAMIC BIT(13) +#define PCS_OUT_VEC_B6_SEL_OUT BIT(12) +#define PCS_OUT_VEC_B5_DYNAMIC BIT(11) +#define PCS_OUT_VEC_B5_SEL_OUT BIT(10) +#define PCS_OUT_VEC_B4_DYNAMIC BIT(9) +#define PCS_OUT_VEC_B4_SEL_OUT BIT(8) +#define PCS_OUT_VEC_B3_DYNAMIC BIT(7) +#define PCS_OUT_VEC_B3_SEL_OUT BIT(6) +#define PCS_OUT_VEC_B2_DYNAMIC BIT(5) +#define PCS_OUT_VEC_B2_SEL_OUT BIT(4) +#define PCS_OUT_VEC_B1_DYNAMIC BIT(3) +#define PCS_OUT_VEC_B1_SEL_OUT BIT(2) +#define PCS_OUT_VEC_B0_DYNAMIC BIT(1) +#define PCS_OUT_VEC_B0_SEL_OUT BIT(0) + +#define EXYNOS9_PCS_TIMEOUT_0 0x0170 + +#define EXYNOS9_PCS_TIMEOUT_3 0x017c + +#define EXYNOS9_PCS_EBUF_PARAM 0x0304 +#define EBUF_PARAM_SKP_REMOVE_TH_EMPTY_MODE GENMASK(29, 24) + +#define EXYNOS9_PCS_BACK_END_MODE_VEC 0x030c +#define BACK_END_MODE_VEC_FORCE_EBUF_EMPTY_MODE BIT(1) +#define BACK_END_MODE_VEC_DISABLE_DATA_MASK BIT(0) + +#define EXYNOS9_PCS_RX_CONTROL 0x03f0 +#define RX_CONTROL_EN_BLOCK_ALIGNER_TYPE_B BIT(22) + +#define EXYNOS9_PCS_RX_CONTROL_DEBUG 0x03f4 +#define RX_CONTROL_DEBUG_EN_TS_CHECK BIT(5) +#define RX_CONTROL_DEBUG_NUM_COM_FOUND GENMASK(3, 0) + +#define EXYNOS9_PCS_LOCAL_COEF 0x040c +#define LOCAL_COEF_PMA_CENTER_COEF GENMASK(21, 16) +#define LOCAL_COEF_LF GENMASK(13, 8) +#define LOCAL_COEF_FS GENMASK(5, 0) + +#define EXYNOS9_PCS_HS_TX_COEF_MAP_0 0x0410 +#define HS_TX_COEF_MAP_0_SSTX_DEEMP GENMASK(17, 12) +#define HS_TX_COEF_MAP_0_SSTX_LEVEL GENMASK(11, 6) +#define HS_TX_COEF_MAP_0_SSTX_PRE_SHOOT GENMASK(5, 0) + + #define KHZ 1000 #define MHZ (KHZ * KHZ) +#define PHY_TUNING_ENTRY_PHY(o, m, v) { \ + .off = (o), \ + .mask = (m), \ + .val = (v), \ + .region = PTR_PHY \ + } + +#define PHY_TUNING_ENTRY_PCS(o, m, v) { \ + .off = (o), \ + .mask = (m), \ + .val = (v), \ + .region = PTR_PCS \ + } + +#define PHY_TUNING_ENTRY_PMA(o, m, v) { \ + .off = (o), \ + .mask = (m), \ + .val = (v), \ + .region = PTR_PMA, \ + } + +#define PHY_TUNING_ENTRY_LAST { .region = PTR_INVALID } + +#define for_each_phy_tune(tune) \ + for (; (tune)->region != PTR_INVALID; ++(tune)) + +struct exynos5_usbdrd_phy_tuning { + u32 off; + u32 mask; + u32 val; + char region; +#define PTR_INVALID 0 +#define PTR_PHY 1 +#define PTR_PCS 2 +#define PTR_PMA 3 +}; + +enum exynos5_usbdrd_phy_tuning_state { + PTS_UTMI_POSTINIT, + PTS_PIPE3_PREINIT, + PTS_PIPE3_INIT, + PTS_PIPE3_POSTINIT, + PTS_PIPE3_POSTLOCK, + PTS_MAX, +}; + enum exynos5_usbdrd_phy_id { EXYNOS5_DRDPHY_UTMI, EXYNOS5_DRDPHY_PIPE3, @@ -187,44 +354,48 @@ struct exynos5_usbdrd_phy; struct exynos5_usbdrd_phy_config { u32 id; - void (*phy_isol)(struct phy_usb_instance *inst, u32 on); + void (*phy_isol)(struct phy_usb_instance *inst, bool isolate); void (*phy_init)(struct exynos5_usbdrd_phy *phy_drd); unsigned int (*set_refclk)(struct phy_usb_instance *inst); }; struct exynos5_usbdrd_phy_drvdata { const struct exynos5_usbdrd_phy_config *phy_cfg; + const struct exynos5_usbdrd_phy_tuning **phy_tunes; const struct phy_ops *phy_ops; + const char * const *clk_names; + int n_clks; + const char * const *core_clk_names; + int n_core_clks; + const char * const *regulator_names; + int n_regulators; u32 pmu_offset_usbdrd0_phy; + u32 pmu_offset_usbdrd0_phy_ss; u32 pmu_offset_usbdrd1_phy; - bool has_common_clk_gate; }; /** * struct exynos5_usbdrd_phy - driver data for USB 3.0 PHY * @dev: pointer to device instance of this platform device * @reg_phy: usb phy controller register memory base - * @clk: phy clock for register access - * @pipeclk: clock for pipe3 phy - * @utmiclk: clock for utmi+ phy - * @itpclk: clock for ITP generation + * @reg_pcs: usb phy physical coding sublayer register memory base + * @reg_pma: usb phy physical media attachment register memory base + * @clks: clocks for register access + * @core_clks: core clocks for phy (ref, pipe3, utmi+, ITP, etc. as required) * @drv_data: pointer to SoC level driver data structure * @phys: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY * instances each with its 'phy' and 'phy_cfg'. * @extrefclk: frequency select settings when using 'separate * reference clocks' for SS and HS operations - * @ref_clk: reference clock to PHY block from which PHY's - * operational clocks are derived - * @vbus: VBUS regulator for phy - * @vbus_boost: Boost regulator for VBUS present on few Exynos boards + * @regulators: regulators for phy */ struct exynos5_usbdrd_phy { struct device *dev; void __iomem *reg_phy; - struct clk *clk; - struct clk *pipeclk; - struct clk *utmiclk; - struct clk *itpclk; + void __iomem *reg_pcs; + void __iomem *reg_pma; + struct clk_bulk_data *clks; + struct clk_bulk_data *core_clks; const struct exynos5_usbdrd_phy_drvdata *drv_data; struct phy_usb_instance { struct phy *phy; @@ -234,9 +405,7 @@ struct exynos5_usbdrd_phy { const struct exynos5_usbdrd_phy_config *phy_cfg; } phys[EXYNOS5_DRDPHYS_NUM]; u32 extrefclk; - struct clk *ref_clk; - struct regulator *vbus; - struct regulator *vbus_boost; + struct regulator_bulk_data *regulators; }; static inline @@ -287,14 +456,14 @@ static unsigned int exynos5_rate_to_clk(unsigned long rate, u32 *reg) } static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst, - unsigned int on) + bool isolate) { unsigned int val; if (!inst->reg_pmu) return; - val = on ? 0 : EXYNOS4_PHY_ENABLE; + val = isolate ? 0 : EXYNOS4_PHY_ENABLE; regmap_update_bits(inst->reg_pmu, inst->pmu_offset, EXYNOS4_PHY_ENABLE, val); @@ -371,6 +540,45 @@ exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst) return reg; } +static void +exynos5_usbdrd_apply_phy_tunes(struct exynos5_usbdrd_phy *phy_drd, + enum exynos5_usbdrd_phy_tuning_state state) +{ + const struct exynos5_usbdrd_phy_tuning *tune; + + tune = phy_drd->drv_data->phy_tunes[state]; + if (!tune) + return; + + for_each_phy_tune(tune) { + void __iomem *reg_base; + u32 reg = 0; + + switch (tune->region) { + case PTR_PHY: + reg_base = phy_drd->reg_phy; + break; + case PTR_PCS: + reg_base = phy_drd->reg_pcs; + break; + case PTR_PMA: + reg_base = phy_drd->reg_pma; + break; + default: + dev_warn_once(phy_drd->dev, + "unknown phy region %d\n", tune->region); + continue; + } + + if (~tune->mask) { + reg = readl(reg_base + tune->off); + reg &= ~tune->mask; + } + reg |= tune->val; + writel(reg, reg_base + tune->off); + } +} + static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd) { u32 reg; @@ -386,6 +594,129 @@ static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd) writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); } +static void +exynos5_usbdrd_usbdp_g2_v4_ctrl_pma_ready(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + + /* link pipe_clock selection to pclk of PMA */ + reg = readl(regs_base + EXYNOS850_DRD_CLKRST); + reg |= CLKRST_LINK_PCLK_SEL; + writel(reg, regs_base + EXYNOS850_DRD_CLKRST); + + reg = readl(regs_base + EXYNOS850_DRD_SECPMACTL); + reg &= ~SECPMACTL_PMA_REF_FREQ_SEL; + reg |= FIELD_PREP_CONST(SECPMACTL_PMA_REF_FREQ_SEL, 1); + /* SFR reset */ + reg |= (SECPMACTL_PMA_LOW_PWR | SECPMACTL_PMA_APB_SW_RST); + reg &= ~(SECPMACTL_PMA_ROPLL_REF_CLK_SEL | + SECPMACTL_PMA_LCPLL_REF_CLK_SEL); + /* PMA power off */ + reg |= (SECPMACTL_PMA_TRSV_SW_RST | SECPMACTL_PMA_CMN_SW_RST | + SECPMACTL_PMA_INIT_SW_RST); + writel(reg, regs_base + EXYNOS850_DRD_SECPMACTL); + + udelay(1); + + reg = readl(regs_base + EXYNOS850_DRD_SECPMACTL); + reg &= ~SECPMACTL_PMA_LOW_PWR; + writel(reg, regs_base + EXYNOS850_DRD_SECPMACTL); + + udelay(1); + + /* release override */ + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + reg &= ~LINKCTRL_FORCE_PIPE_EN; + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + udelay(1); + + /* APB enable */ + reg = readl(regs_base + EXYNOS850_DRD_SECPMACTL); + reg &= ~SECPMACTL_PMA_APB_SW_RST; + writel(reg, regs_base + EXYNOS850_DRD_SECPMACTL); +} + +static void +exynos5_usbdrd_usbdp_g2_v4_pma_lane_mux_sel(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *regs_base = phy_drd->reg_pma; + u32 reg; + + /* lane configuration: USB on all lanes */ + reg = readl(regs_base + EXYNOS9_PMA_USBDP_CMN_REG00B8); + reg &= ~CMN_REG00B8_LANE_MUX_SEL_DP; + writel(reg, regs_base + EXYNOS9_PMA_USBDP_CMN_REG00B8); + + /* + * FIXME: below code supports one connector orientation only. It needs + * updating once we can receive connector events. + */ + /* override of TX receiver detector and comparator: lane 1 */ + reg = readl(regs_base + EXYNOS9_PMA_USBDP_TRSV_REG0413); + reg &= ~TRSV_REG0413_OVRD_LN1_TX_RXD_COMP_EN; + reg &= ~TRSV_REG0413_OVRD_LN1_TX_RXD_EN; + writel(reg, regs_base + EXYNOS9_PMA_USBDP_TRSV_REG0413); + + /* lane 3 */ + reg = readl(regs_base + EXYNOS9_PMA_USBDP_TRSV_REG0813); + reg |= TRSV_REG0813_OVRD_LN3_TX_RXD_COMP_EN; + reg |= TRSV_REG0813_OVRD_LN3_TX_RXD_EN; + writel(reg, regs_base + EXYNOS9_PMA_USBDP_TRSV_REG0813); +} + +static int +exynos5_usbdrd_usbdp_g2_v4_pma_check_pll_lock(struct exynos5_usbdrd_phy *phy_drd) +{ + static const unsigned int timeout_us = 40000; + static const unsigned int sleep_us = 40; + static const u32 locked = (CMN_REG01C0_ANA_LCPLL_LOCK_DONE | + CMN_REG01C0_ANA_LCPLL_AFC_DONE); + u32 reg; + int err; + + err = readl_poll_timeout( + phy_drd->reg_pma + EXYNOS9_PMA_USBDP_CMN_REG01C0, + reg, (reg & locked) == locked, sleep_us, timeout_us); + if (err) + dev_err(phy_drd->dev, + "timed out waiting for PLL lock: %#.8x\n", reg); + + return err; +} + +static void +exynos5_usbdrd_usbdp_g2_v4_pma_check_cdr_lock(struct exynos5_usbdrd_phy *phy_drd) +{ + static const unsigned int timeout_us = 40000; + static const unsigned int sleep_us = 40; + static const u32 locked = + (TRSV_REG03C3_LN0_MON_RX_CDR_AFC_DONE + | TRSV_REG03C3_LN0_MON_RX_CDR_CAL_DONE + | TRSV_REG03C3_LN0_MON_RX_CDR_FLD_PLL_MODE_DONE + | TRSV_REG03C3_LN0_MON_RX_CDR_LOCK_DONE); + u32 reg; + int err; + + err = readl_poll_timeout( + phy_drd->reg_pma + EXYNOS9_PMA_USBDP_TRSV_REG03C3, + reg, (reg & locked) == locked, sleep_us, timeout_us); + if (!err) + return; + + dev_err(phy_drd->dev, + "timed out waiting for CDR lock (l0): %#.8x, retrying\n", reg); + + /* based on cable orientation, this might be on the other phy port */ + err = readl_poll_timeout( + phy_drd->reg_pma + EXYNOS9_PMA_USBDP_TRSV_REG07C3, + reg, (reg & locked) == locked, sleep_us, timeout_us); + if (err) + dev_err(phy_drd->dev, + "timed out waiting for CDR lock (l2): %#.8x\n", reg); +} + static void exynos5_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) { u32 reg; @@ -417,7 +748,7 @@ static int exynos5_usbdrd_phy_init(struct phy *phy) struct phy_usb_instance *inst = phy_get_drvdata(phy); struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); - ret = clk_prepare_enable(phy_drd->clk); + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); if (ret) return ret; @@ -462,12 +793,12 @@ static int exynos5_usbdrd_phy_init(struct phy *phy) writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); - udelay(10); + fsleep(10); reg &= ~PHYCLKRST_PORTRESET; writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); - clk_disable_unprepare(phy_drd->clk); + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); return 0; } @@ -479,7 +810,7 @@ static int exynos5_usbdrd_phy_exit(struct phy *phy) struct phy_usb_instance *inst = phy_get_drvdata(phy); struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); - ret = clk_prepare_enable(phy_drd->clk); + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); if (ret) return ret; @@ -501,7 +832,7 @@ static int exynos5_usbdrd_phy_exit(struct phy *phy) PHYTEST_POWERDOWN_HSP; writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); - clk_disable_unprepare(phy_drd->clk); + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); return 0; } @@ -514,47 +845,27 @@ static int exynos5_usbdrd_phy_power_on(struct phy *phy) dev_dbg(phy_drd->dev, "Request to power_on usbdrd_phy phy\n"); - clk_prepare_enable(phy_drd->ref_clk); - if (!phy_drd->drv_data->has_common_clk_gate) { - clk_prepare_enable(phy_drd->pipeclk); - clk_prepare_enable(phy_drd->utmiclk); - clk_prepare_enable(phy_drd->itpclk); - } + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_core_clks, + phy_drd->core_clks); + if (ret) + return ret; /* Enable VBUS supply */ - if (phy_drd->vbus_boost) { - ret = regulator_enable(phy_drd->vbus_boost); - if (ret) { - dev_err(phy_drd->dev, - "Failed to enable VBUS boost supply\n"); - goto fail_vbus; - } - } - - if (phy_drd->vbus) { - ret = regulator_enable(phy_drd->vbus); - if (ret) { - dev_err(phy_drd->dev, "Failed to enable VBUS supply\n"); - goto fail_vbus_boost; - } + ret = regulator_bulk_enable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); + if (ret) { + dev_err(phy_drd->dev, "Failed to enable PHY regulator(s)\n"); + goto fail_vbus; } - /* Power-on PHY*/ - inst->phy_cfg->phy_isol(inst, 0); + /* Power-on PHY */ + inst->phy_cfg->phy_isol(inst, false); return 0; -fail_vbus_boost: - if (phy_drd->vbus_boost) - regulator_disable(phy_drd->vbus_boost); - fail_vbus: - clk_disable_unprepare(phy_drd->ref_clk); - if (!phy_drd->drv_data->has_common_clk_gate) { - clk_disable_unprepare(phy_drd->itpclk); - clk_disable_unprepare(phy_drd->utmiclk); - clk_disable_unprepare(phy_drd->pipeclk); - } + clk_bulk_disable_unprepare(phy_drd->drv_data->n_core_clks, + phy_drd->core_clks); return ret; } @@ -567,20 +878,14 @@ static int exynos5_usbdrd_phy_power_off(struct phy *phy) dev_dbg(phy_drd->dev, "Request to power_off usbdrd_phy phy\n"); /* Power-off the PHY */ - inst->phy_cfg->phy_isol(inst, 1); + inst->phy_cfg->phy_isol(inst, true); /* Disable VBUS supply */ - if (phy_drd->vbus) - regulator_disable(phy_drd->vbus); - if (phy_drd->vbus_boost) - regulator_disable(phy_drd->vbus_boost); - - clk_disable_unprepare(phy_drd->ref_clk); - if (!phy_drd->drv_data->has_common_clk_gate) { - clk_disable_unprepare(phy_drd->itpclk); - clk_disable_unprepare(phy_drd->pipeclk); - clk_disable_unprepare(phy_drd->utmiclk); - } + regulator_bulk_disable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_core_clks, + phy_drd->core_clks); return 0; } @@ -744,10 +1049,29 @@ static const struct phy_ops exynos5_usbdrd_phy_ops = { .owner = THIS_MODULE, }; +static void +exynos5_usbdrd_usb_v3p1_pipe_override(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + + /* force pipe3 signal for link */ + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + reg &= ~LINKCTRL_FORCE_PHYSTATUS; + reg |= LINKCTRL_FORCE_PIPE_EN | LINKCTRL_FORCE_RXELECIDLE; + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + /* PMA disable */ + reg = readl(regs_base + EXYNOS850_DRD_SECPMACTL); + reg |= SECPMACTL_PMA_LOW_PWR; + writel(reg, regs_base + EXYNOS850_DRD_SECPMACTL); +} + static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) { void __iomem *regs_base = phy_drd->reg_phy; u32 reg; + u32 ss_ports; /* * Disable HWACG (hardware auto clock gating control). This will force @@ -758,8 +1082,16 @@ static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) reg |= LINKCTRL_FORCE_QACT; writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + reg = readl(regs_base + EXYNOS850_DRD_LINKPORT); + ss_ports = FIELD_GET(LINKPORT_HOST_NUM_U3, reg); + /* Start PHY Reset (POR=high) */ reg = readl(regs_base + EXYNOS850_DRD_CLKRST); + if (ss_ports) { + reg |= CLKRST_PHY20_SW_POR; + reg |= CLKRST_PHY20_SW_POR_SEL; + reg |= CLKRST_PHY_RESET_SEL; + } reg |= CLKRST_PHY_SW_RST; writel(reg, regs_base + EXYNOS850_DRD_CLKRST); @@ -787,22 +1119,58 @@ static void exynos850_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) reg |= HSP_VBUSVLDEXT | HSP_VBUSVLDEXTSEL; writel(reg, regs_base + EXYNOS850_DRD_HSP); + reg = readl(regs_base + EXYNOS850_DRD_SSPPLLCTL); + reg &= ~SSPPLLCTL_FSEL; + switch (phy_drd->extrefclk) { + case EXYNOS5_FSEL_50MHZ: + reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 7); + break; + case EXYNOS5_FSEL_26MHZ: + reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 6); + break; + case EXYNOS5_FSEL_24MHZ: + reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 2); + break; + case EXYNOS5_FSEL_20MHZ: + reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 1); + break; + case EXYNOS5_FSEL_19MHZ2: + reg |= FIELD_PREP_CONST(SSPPLLCTL_FSEL, 0); + break; + default: + dev_warn(phy_drd->dev, "unsupported ref clk: %#.2x\n", + phy_drd->extrefclk); + break; + } + writel(reg, regs_base + EXYNOS850_DRD_SSPPLLCTL); + + if (phy_drd->drv_data->phy_tunes) + exynos5_usbdrd_apply_phy_tunes(phy_drd, + PTS_UTMI_POSTINIT); + /* Power up PHY analog blocks */ reg = readl(regs_base + EXYNOS850_DRD_HSP_TEST); reg &= ~HSP_TEST_SIDDQ; writel(reg, regs_base + EXYNOS850_DRD_HSP_TEST); /* Finish PHY reset (POR=low) */ - udelay(10); /* required before doing POR=low */ + fsleep(10); /* required before doing POR=low */ reg = readl(regs_base + EXYNOS850_DRD_CLKRST); + if (ss_ports) { + reg |= CLKRST_PHY20_SW_POR_SEL; + reg &= ~CLKRST_PHY20_SW_POR; + } reg &= ~(CLKRST_PHY_SW_RST | CLKRST_PORT_RST); writel(reg, regs_base + EXYNOS850_DRD_CLKRST); - udelay(75); /* required after POR=low for guaranteed PHY clock */ + fsleep(75); /* required after POR=low for guaranteed PHY clock */ /* Disable single ended signal out */ reg = readl(regs_base + EXYNOS850_DRD_HSP); reg &= ~HSP_FSV_OUT_EN; writel(reg, regs_base + EXYNOS850_DRD_HSP); + + if (ss_ports) + exynos5_usbdrd_usb_v3p1_pipe_override(phy_drd); } static int exynos850_usbdrd_phy_init(struct phy *phy) @@ -811,14 +1179,14 @@ static int exynos850_usbdrd_phy_init(struct phy *phy) struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); int ret; - ret = clk_prepare_enable(phy_drd->clk); + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); if (ret) return ret; /* UTMI or PIPE3 specific init */ inst->phy_cfg->phy_init(phy_drd); - clk_disable_unprepare(phy_drd->clk); + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); return 0; } @@ -831,7 +1199,7 @@ static int exynos850_usbdrd_phy_exit(struct phy *phy) u32 reg; int ret; - ret = clk_prepare_enable(phy_drd->clk); + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); if (ret) return ret; @@ -850,11 +1218,11 @@ static int exynos850_usbdrd_phy_exit(struct phy *phy) reg = readl(regs_base + EXYNOS850_DRD_CLKRST); reg |= CLKRST_LINK_SW_RST; writel(reg, regs_base + EXYNOS850_DRD_CLKRST); - udelay(10); /* required before doing POR=low */ + fsleep(10); /* required before doing POR=low */ reg &= ~CLKRST_LINK_SW_RST; writel(reg, regs_base + EXYNOS850_DRD_CLKRST); - clk_disable_unprepare(phy_drd->clk); + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); return 0; } @@ -867,53 +1235,138 @@ static const struct phy_ops exynos850_usbdrd_phy_ops = { .owner = THIS_MODULE, }; -static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy *phy_drd) +static void exynos5_usbdrd_gs101_pipe3_init(struct exynos5_usbdrd_phy *phy_drd) { - unsigned long ref_rate; + void __iomem *regs_pma = phy_drd->reg_pma; + void __iomem *regs_phy = phy_drd->reg_phy; + u32 reg; + + exynos5_usbdrd_usbdp_g2_v4_ctrl_pma_ready(phy_drd); + + /* force aux off */ + reg = readl(regs_pma + EXYNOS9_PMA_USBDP_CMN_REG0008); + reg &= ~CMN_REG0008_AUX_EN; + reg |= CMN_REG0008_OVRD_AUX_EN; + writel(reg, regs_pma + EXYNOS9_PMA_USBDP_CMN_REG0008); + + exynos5_usbdrd_apply_phy_tunes(phy_drd, PTS_PIPE3_PREINIT); + exynos5_usbdrd_apply_phy_tunes(phy_drd, PTS_PIPE3_INIT); + exynos5_usbdrd_apply_phy_tunes(phy_drd, PTS_PIPE3_POSTINIT); + + exynos5_usbdrd_usbdp_g2_v4_pma_lane_mux_sel(phy_drd); + + /* reset release from port */ + reg = readl(regs_phy + EXYNOS850_DRD_SECPMACTL); + reg &= ~(SECPMACTL_PMA_TRSV_SW_RST | SECPMACTL_PMA_CMN_SW_RST | + SECPMACTL_PMA_INIT_SW_RST); + writel(reg, regs_phy + EXYNOS850_DRD_SECPMACTL); + + if (!exynos5_usbdrd_usbdp_g2_v4_pma_check_pll_lock(phy_drd)) + exynos5_usbdrd_usbdp_g2_v4_pma_check_cdr_lock(phy_drd); +} + +static int exynos5_usbdrd_gs101_phy_init(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); int ret; - phy_drd->clk = devm_clk_get(phy_drd->dev, "phy"); - if (IS_ERR(phy_drd->clk)) { - dev_err(phy_drd->dev, "Failed to get phy clock\n"); - return PTR_ERR(phy_drd->clk); + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) { + /* Power-on PHY ... */ + ret = regulator_bulk_enable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); + if (ret) { + dev_err(phy_drd->dev, + "Failed to enable PHY regulator(s)\n"); + return ret; + } } + /* + * ... and ungate power via PMU. Without this here, we get an SError + * trying to access PMA registers + */ + exynos5_usbdrd_phy_isol(inst, false); - phy_drd->ref_clk = devm_clk_get(phy_drd->dev, "ref"); - if (IS_ERR(phy_drd->ref_clk)) { - dev_err(phy_drd->dev, "Failed to get phy reference clock\n"); - return PTR_ERR(phy_drd->ref_clk); - } - ref_rate = clk_get_rate(phy_drd->ref_clk); + return exynos850_usbdrd_phy_init(phy); +} - ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk); - if (ret) { - dev_err(phy_drd->dev, "Clock rate (%ld) not supported\n", - ref_rate); +static int exynos5_usbdrd_gs101_phy_exit(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret; + + if (inst->phy_cfg->id != EXYNOS5_DRDPHY_UTMI) + return 0; + + ret = exynos850_usbdrd_phy_exit(phy); + if (ret) return ret; - } - if (!phy_drd->drv_data->has_common_clk_gate) { - phy_drd->pipeclk = devm_clk_get(phy_drd->dev, "phy_pipe"); - if (IS_ERR(phy_drd->pipeclk)) { - dev_info(phy_drd->dev, - "PIPE3 phy operational clock not specified\n"); - phy_drd->pipeclk = NULL; - } + exynos5_usbdrd_phy_isol(inst, true); + return regulator_bulk_disable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); +} - phy_drd->utmiclk = devm_clk_get(phy_drd->dev, "phy_utmi"); - if (IS_ERR(phy_drd->utmiclk)) { - dev_info(phy_drd->dev, - "UTMI phy operational clock not specified\n"); - phy_drd->utmiclk = NULL; - } +static const struct phy_ops gs101_usbdrd_phy_ops = { + .init = exynos5_usbdrd_gs101_phy_init, + .exit = exynos5_usbdrd_gs101_phy_exit, + .owner = THIS_MODULE, +}; + +static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy *phy_drd) +{ + int ret; + struct clk *ref_clk; + unsigned long ref_rate; + + phy_drd->clks = devm_kcalloc(phy_drd->dev, phy_drd->drv_data->n_clks, + sizeof(*phy_drd->clks), GFP_KERNEL); + if (!phy_drd->clks) + return -ENOMEM; + + for (int i = 0; i < phy_drd->drv_data->n_clks; ++i) + phy_drd->clks[i].id = phy_drd->drv_data->clk_names[i]; + + ret = devm_clk_bulk_get(phy_drd->dev, phy_drd->drv_data->n_clks, + phy_drd->clks); + if (ret) + return dev_err_probe(phy_drd->dev, ret, + "failed to get phy clock(s)\n"); + + phy_drd->core_clks = devm_kcalloc(phy_drd->dev, + phy_drd->drv_data->n_core_clks, + sizeof(*phy_drd->core_clks), + GFP_KERNEL); + if (!phy_drd->core_clks) + return -ENOMEM; - phy_drd->itpclk = devm_clk_get(phy_drd->dev, "itp"); - if (IS_ERR(phy_drd->itpclk)) { - dev_info(phy_drd->dev, - "ITP clock from main OSC not specified\n"); - phy_drd->itpclk = NULL; + for (int i = 0; i < phy_drd->drv_data->n_core_clks; ++i) + phy_drd->core_clks[i].id = phy_drd->drv_data->core_clk_names[i]; + + ret = devm_clk_bulk_get(phy_drd->dev, phy_drd->drv_data->n_core_clks, + phy_drd->core_clks); + if (ret) + return dev_err_probe(phy_drd->dev, ret, + "failed to get phy core clock(s)\n"); + + ref_clk = NULL; + for (int i = 0; i < phy_drd->drv_data->n_core_clks; ++i) { + if (!strcmp(phy_drd->core_clks[i].id, "ref")) { + ref_clk = phy_drd->core_clks[i].clk; + break; } } + if (!ref_clk) + return dev_err_probe(phy_drd->dev, -ENODEV, + "failed to find phy reference clock\n"); + + ref_rate = clk_get_rate(ref_clk); + ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk); + if (ret) + return dev_err_probe(phy_drd->dev, ret, + "clock rate (%ld) not supported\n", + ref_rate); return 0; } @@ -941,19 +1394,45 @@ static const struct exynos5_usbdrd_phy_config phy_cfg_exynos850[] = { }, }; +static const char * const exynos5_clk_names[] = { + "phy", +}; + +static const char * const exynos5_core_clk_names[] = { + "ref", +}; + +static const char * const exynos5433_core_clk_names[] = { + "ref", "phy_pipe", "phy_utmi", "itp", +}; + +static const char * const exynos5_regulator_names[] = { + "vbus", "vbus-boost", +}; + static const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy = { .phy_cfg = phy_cfg_exynos5, .phy_ops = &exynos5_usbdrd_phy_ops, .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, .pmu_offset_usbdrd1_phy = EXYNOS5420_USBDRD1_PHY_CONTROL, - .has_common_clk_gate = true, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = exynos5_regulator_names, + .n_regulators = ARRAY_SIZE(exynos5_regulator_names), }; static const struct exynos5_usbdrd_phy_drvdata exynos5250_usbdrd_phy = { .phy_cfg = phy_cfg_exynos5, .phy_ops = &exynos5_usbdrd_phy_ops, .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, - .has_common_clk_gate = true, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = exynos5_regulator_names, + .n_regulators = ARRAY_SIZE(exynos5_regulator_names), }; static const struct exynos5_usbdrd_phy_drvdata exynos5433_usbdrd_phy = { @@ -961,25 +1440,218 @@ static const struct exynos5_usbdrd_phy_drvdata exynos5433_usbdrd_phy = { .phy_ops = &exynos5_usbdrd_phy_ops, .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, .pmu_offset_usbdrd1_phy = EXYNOS5433_USBHOST30_PHY_CONTROL, - .has_common_clk_gate = false, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5433_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5433_core_clk_names), + .regulator_names = exynos5_regulator_names, + .n_regulators = ARRAY_SIZE(exynos5_regulator_names), }; static const struct exynos5_usbdrd_phy_drvdata exynos7_usbdrd_phy = { .phy_cfg = phy_cfg_exynos5, .phy_ops = &exynos5_usbdrd_phy_ops, .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, - .has_common_clk_gate = false, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5433_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5433_core_clk_names), + .regulator_names = exynos5_regulator_names, + .n_regulators = ARRAY_SIZE(exynos5_regulator_names), }; static const struct exynos5_usbdrd_phy_drvdata exynos850_usbdrd_phy = { .phy_cfg = phy_cfg_exynos850, .phy_ops = &exynos850_usbdrd_phy_ops, .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, - .has_common_clk_gate = true, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = exynos5_regulator_names, + .n_regulators = ARRAY_SIZE(exynos5_regulator_names), +}; + +static const struct exynos5_usbdrd_phy_config phy_cfg_gs101[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos850_usbdrd_utmi_init, + }, + { + .id = EXYNOS5_DRDPHY_PIPE3, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos5_usbdrd_gs101_pipe3_init, + }, +}; + +static const struct exynos5_usbdrd_phy_tuning gs101_tunes_utmi_postinit[] = { + PHY_TUNING_ENTRY_PHY(EXYNOS850_DRD_HSPPARACON, + (HSPPARACON_TXVREF | HSPPARACON_TXRES | + HSPPARACON_TXPREEMPAMP | HSPPARACON_SQRX | + HSPPARACON_COMPDIS), + (FIELD_PREP_CONST(HSPPARACON_TXVREF, 6) | + FIELD_PREP_CONST(HSPPARACON_TXRES, 1) | + FIELD_PREP_CONST(HSPPARACON_TXPREEMPAMP, 3) | + FIELD_PREP_CONST(HSPPARACON_SQRX, 5) | + FIELD_PREP_CONST(HSPPARACON_COMPDIS, 7))), + PHY_TUNING_ENTRY_LAST +}; + +static const struct exynos5_usbdrd_phy_tuning gs101_tunes_pipe3_preinit[] = { + /* preinit */ + /* CDR data mode exit GEN1 ON / GEN2 OFF */ + PHY_TUNING_ENTRY_PMA(0x0c8c, -1, 0xff), + PHY_TUNING_ENTRY_PMA(0x1c8c, -1, 0xff), + PHY_TUNING_ENTRY_PMA(0x0c9c, -1, 0x7d), + PHY_TUNING_ENTRY_PMA(0x1c9c, -1, 0x7d), + /* improve EDS distribution */ + PHY_TUNING_ENTRY_PMA(0x0e7c, -1, 0x06), + PHY_TUNING_ENTRY_PMA(0x09e0, -1, 0x00), + PHY_TUNING_ENTRY_PMA(0x09e4, -1, 0x36), + PHY_TUNING_ENTRY_PMA(0x1e7c, -1, 0x06), + PHY_TUNING_ENTRY_PMA(0x1e90, -1, 0x00), + PHY_TUNING_ENTRY_PMA(0x1e94, -1, 0x36), + /* improve LVCC */ + PHY_TUNING_ENTRY_PMA(0x08f0, -1, 0x30), + PHY_TUNING_ENTRY_PMA(0x18f0, -1, 0x30), + /* LFPS RX VIH shmoo hole */ + PHY_TUNING_ENTRY_PMA(0x0a08, -1, 0x0c), + PHY_TUNING_ENTRY_PMA(0x1a08, -1, 0x0c), + /* remove unrelated option for v4 phy */ + PHY_TUNING_ENTRY_PMA(0x0a0c, -1, 0x05), + PHY_TUNING_ENTRY_PMA(0x1a0c, -1, 0x05), + /* improve Gen2 LVCC */ + PHY_TUNING_ENTRY_PMA(0x00f8, -1, 0x1c), + PHY_TUNING_ENTRY_PMA(0x00fc, -1, 0x54), + /* Change Vth of RCV_DET because of TD 7.40 Polling Retry Test */ + PHY_TUNING_ENTRY_PMA(0x104c, -1, 0x07), + PHY_TUNING_ENTRY_PMA(0x204c, -1, 0x07), + /* reduce Ux Exit time, assuming 26MHz clock */ + /* Gen1 */ + PHY_TUNING_ENTRY_PMA(0x0ca8, -1, 0x00), + PHY_TUNING_ENTRY_PMA(0x0cac, -1, 0x04), + PHY_TUNING_ENTRY_PMA(0x1ca8, -1, 0x00), + PHY_TUNING_ENTRY_PMA(0x1cac, -1, 0x04), + /* Gen2 */ + PHY_TUNING_ENTRY_PMA(0x0cb8, -1, 0x00), + PHY_TUNING_ENTRY_PMA(0x0cbc, -1, 0x04), + PHY_TUNING_ENTRY_PMA(0x1cb8, -1, 0x00), + PHY_TUNING_ENTRY_PMA(0x1cbc, -1, 0x04), + /* RX impedance setting */ + PHY_TUNING_ENTRY_PMA(0x0bb0, 0x03, 0x01), + PHY_TUNING_ENTRY_PMA(0x0bb4, 0xf0, 0xa0), + PHY_TUNING_ENTRY_PMA(0x1bb0, 0x03, 0x01), + PHY_TUNING_ENTRY_PMA(0x1bb4, 0xf0, 0xa0), + + PHY_TUNING_ENTRY_LAST +}; + +static const struct exynos5_usbdrd_phy_tuning gs101_tunes_pipe3_init[] = { + /* init */ + /* abnormal common pattern mask */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_BACK_END_MODE_VEC, + BACK_END_MODE_VEC_DISABLE_DATA_MASK, 0), + /* de-serializer enabled when U2 */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_OUT_VEC_2, PCS_OUT_VEC_B4_DYNAMIC, + PCS_OUT_VEC_B4_SEL_OUT), + /* TX Keeper Disable, Squelch on when U3 */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_OUT_VEC_3, PCS_OUT_VEC_B7_DYNAMIC, + PCS_OUT_VEC_B7_SEL_OUT | PCS_OUT_VEC_B2_SEL_OUT), + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_NS_VEC_PS1_N1, -1, + (FIELD_PREP_CONST(NS_VEC_NS_REQ, 5) | + NS_VEC_ENABLE_TIMER | + FIELD_PREP_CONST(NS_VEC_SEL_TIMEOUT, 3))), + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_NS_VEC_PS2_N0, -1, + (FIELD_PREP_CONST(NS_VEC_NS_REQ, 1) | + NS_VEC_ENABLE_TIMER | + FIELD_PREP_CONST(NS_VEC_SEL_TIMEOUT, 3) | + FIELD_PREP_CONST(NS_VEC_COND_MASK, 2) | + FIELD_PREP_CONST(NS_VEC_EXP_COND, 2))), + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_NS_VEC_PS3_N0, -1, + (FIELD_PREP_CONST(NS_VEC_NS_REQ, 1) | + NS_VEC_ENABLE_TIMER | + FIELD_PREP_CONST(NS_VEC_SEL_TIMEOUT, 3) | + FIELD_PREP_CONST(NS_VEC_COND_MASK, 7) | + FIELD_PREP_CONST(NS_VEC_EXP_COND, 7))), + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_TIMEOUT_0, -1, 112), + /* Block Aligner Type B */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_RX_CONTROL, 0, + RX_CONTROL_EN_BLOCK_ALIGNER_TYPE_B), + /* Block align at TS1/TS2 for Gen2 stability (Gen2 only) */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_RX_CONTROL_DEBUG, + RX_CONTROL_DEBUG_NUM_COM_FOUND, + (RX_CONTROL_DEBUG_EN_TS_CHECK | + /* + * increase pcs ts1 adding packet-cnt 1 --> 4 + * lnx_rx_valid_rstn_delay_rise_sp/ssp : + * 19.6us(0x200) -> 15.3us(0x4) + */ + FIELD_PREP_CONST(RX_CONTROL_DEBUG_NUM_COM_FOUND, 4))), + /* Gen1 Tx DRIVER pre-shoot, de-emphasis, level ctrl */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_HS_TX_COEF_MAP_0, + (HS_TX_COEF_MAP_0_SSTX_DEEMP | HS_TX_COEF_MAP_0_SSTX_LEVEL | + HS_TX_COEF_MAP_0_SSTX_PRE_SHOOT), + (FIELD_PREP_CONST(HS_TX_COEF_MAP_0_SSTX_DEEMP, 8) | + FIELD_PREP_CONST(HS_TX_COEF_MAP_0_SSTX_LEVEL, 0xb) | + FIELD_PREP_CONST(HS_TX_COEF_MAP_0_SSTX_PRE_SHOOT, 0))), + /* Gen2 Tx DRIVER level ctrl */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_LOCAL_COEF, + LOCAL_COEF_PMA_CENTER_COEF, + FIELD_PREP_CONST(LOCAL_COEF_PMA_CENTER_COEF, 0xb)), + /* Gen2 U1 exit LFPS duration : 900ns ~ 1.2us */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_TIMEOUT_3, -1, 4096), + /* set skp_remove_th 0x2 -> 0x7 for avoiding retry problem. */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_EBUF_PARAM, + EBUF_PARAM_SKP_REMOVE_TH_EMPTY_MODE, + FIELD_PREP_CONST(EBUF_PARAM_SKP_REMOVE_TH_EMPTY_MODE, 0x7)), + + PHY_TUNING_ENTRY_LAST +}; + +static const struct exynos5_usbdrd_phy_tuning gs101_tunes_pipe3_postlock[] = { + /* Squelch off when U3 */ + PHY_TUNING_ENTRY_PCS(EXYNOS9_PCS_OUT_VEC_3, PCS_OUT_VEC_B2_SEL_OUT, 0), + + PHY_TUNING_ENTRY_LAST +}; + +static const struct exynos5_usbdrd_phy_tuning *gs101_tunes[PTS_MAX] = { + [PTS_UTMI_POSTINIT] = gs101_tunes_utmi_postinit, + [PTS_PIPE3_PREINIT] = gs101_tunes_pipe3_preinit, + [PTS_PIPE3_INIT] = gs101_tunes_pipe3_init, + [PTS_PIPE3_POSTLOCK] = gs101_tunes_pipe3_postlock, +}; + +static const char * const gs101_clk_names[] = { + "phy", "ctrl_aclk", "ctrl_pclk", "scl_pclk", +}; + +static const char * const gs101_regulator_names[] = { + "pll", + "dvdd-usb20", "vddh-usb20", "vdd33-usb20", + "vdda-usbdp", "vddh-usbdp", +}; + +static const struct exynos5_usbdrd_phy_drvdata gs101_usbd31rd_phy = { + .phy_cfg = phy_cfg_gs101, + .phy_tunes = gs101_tunes, + .phy_ops = &gs101_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = GS101_PHY_CTRL_USB20, + .pmu_offset_usbdrd0_phy_ss = GS101_PHY_CTRL_USBDP, + .clk_names = gs101_clk_names, + .n_clks = ARRAY_SIZE(gs101_clk_names), + .core_clk_names = exynos5_core_clk_names, + .n_core_clks = ARRAY_SIZE(exynos5_core_clk_names), + .regulator_names = gs101_regulator_names, + .n_regulators = ARRAY_SIZE(gs101_regulator_names), }; static const struct of_device_id exynos5_usbdrd_phy_of_match[] = { { + .compatible = "google,gs101-usb31drd-phy", + .data = &gs101_usbd31rd_phy + }, { .compatible = "samsung,exynos5250-usbdrd-phy", .data = &exynos5250_usbdrd_phy }, { @@ -1018,21 +1690,38 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) dev_set_drvdata(dev, phy_drd); phy_drd->dev = dev; - phy_drd->reg_phy = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(phy_drd->reg_phy)) - return PTR_ERR(phy_drd->reg_phy); - drv_data = of_device_get_match_data(dev); if (!drv_data) return -EINVAL; - phy_drd->drv_data = drv_data; + if (of_property_present(dev->of_node, "reg-names")) { + void __iomem *reg; + + reg = devm_platform_ioremap_resource_byname(pdev, "phy"); + if (IS_ERR(reg)) + return PTR_ERR(reg); + phy_drd->reg_phy = reg; + + reg = devm_platform_ioremap_resource_byname(pdev, "pcs"); + if (IS_ERR(reg)) + return PTR_ERR(reg); + phy_drd->reg_pcs = reg; + + reg = devm_platform_ioremap_resource_byname(pdev, "pma"); + if (IS_ERR(reg)) + return PTR_ERR(reg); + phy_drd->reg_pma = reg; + } else { + /* DTB with just a single region */ + phy_drd->reg_phy = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy_drd->reg_phy)) + return PTR_ERR(phy_drd->reg_phy); + } + ret = exynos5_usbdrd_phy_clk_handle(phy_drd); - if (ret) { - dev_err(dev, "Failed to initialize clocks\n"); + if (ret) return ret; - } reg_pmu = syscon_regmap_lookup_by_phandle(dev->of_node, "samsung,pmu-syscon"); @@ -1050,36 +1739,20 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) if (channel < 0) dev_dbg(dev, "Not a multi-controller usbdrd phy\n"); - switch (channel) { - case 1: - pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd1_phy; - break; - case 0: - default: - pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd0_phy; - break; - } - - /* Get Vbus regulators */ - phy_drd->vbus = devm_regulator_get(dev, "vbus"); - if (IS_ERR(phy_drd->vbus)) { - ret = PTR_ERR(phy_drd->vbus); - if (ret == -EPROBE_DEFER) - return ret; - - dev_warn(dev, "Failed to get VBUS supply regulator\n"); - phy_drd->vbus = NULL; - } - - phy_drd->vbus_boost = devm_regulator_get(dev, "vbus-boost"); - if (IS_ERR(phy_drd->vbus_boost)) { - ret = PTR_ERR(phy_drd->vbus_boost); - if (ret == -EPROBE_DEFER) - return ret; - - dev_warn(dev, "Failed to get VBUS boost supply regulator\n"); - phy_drd->vbus_boost = NULL; - } + /* Get regulators */ + phy_drd->regulators = devm_kcalloc(dev, + drv_data->n_regulators, + sizeof(*phy_drd->regulators), + GFP_KERNEL); + if (!phy_drd->regulators) + return ENOMEM; + regulator_bulk_set_supply_names(phy_drd->regulators, + drv_data->regulator_names, + drv_data->n_regulators); + ret = devm_regulator_bulk_get(dev, drv_data->n_regulators, + phy_drd->regulators); + if (ret) + return dev_err_probe(dev, ret, "failed to get regulators\n"); dev_vdbg(dev, "Creating usbdrd_phy phy\n"); @@ -1094,6 +1767,18 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) phy_drd->phys[i].phy = phy; phy_drd->phys[i].index = i; phy_drd->phys[i].reg_pmu = reg_pmu; + switch (channel) { + case 1: + pmu_offset = drv_data->pmu_offset_usbdrd1_phy; + break; + case 0: + default: + pmu_offset = drv_data->pmu_offset_usbdrd0_phy; + if (i == EXYNOS5_DRDPHY_PIPE3 && drv_data + ->pmu_offset_usbdrd0_phy_ss) + pmu_offset = drv_data->pmu_offset_usbdrd0_phy_ss; + break; + } phy_drd->phys[i].pmu_offset = pmu_offset; phy_drd->phys[i].phy_cfg = &drv_data->phy_cfg[i]; phy_set_drvdata(phy, &phy_drd->phys[i]); |