diff options
Diffstat (limited to 'drivers/pci/quirks.c')
-rw-r--r-- | drivers/pci/quirks.c | 110 |
1 files changed, 84 insertions, 26 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 194b243a2817..27e2c8f4ec73 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2929,32 +2929,6 @@ static void __devinit disable_igfx_irq(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); -/* - * The Intel 6 Series/C200 Series chipset's EHCI controllers on many - * ASUS motherboards will cause memory corruption or a system crash - * if they are in D3 while the system is put into S3 sleep. - */ -static void __devinit asus_ehci_no_d3(struct pci_dev *dev) -{ - const char *sys_info; - static const char good_Asus_board[] = "P8Z68-V"; - - if (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP) - return; - if (dev->subsystem_vendor != PCI_VENDOR_ID_ASUSTEK) - return; - sys_info = dmi_get_system_info(DMI_BOARD_NAME); - if (sys_info && memcmp(sys_info, good_Asus_board, - sizeof(good_Asus_board) - 1) == 0) - return; - - dev_info(&dev->dev, "broken D3 during system sleep on ASUS\n"); - dev->dev_flags |= PCI_DEV_FLAGS_NO_D3_DURING_SLEEP; - device_set_wakeup_capable(&dev->dev, false); -} -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c26, asus_ehci_no_d3); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c2d, asus_ehci_no_d3); - static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { @@ -3205,3 +3179,87 @@ int pci_dev_specific_reset(struct pci_dev *dev, int probe) return -ENOTTY; } + +static struct pci_dev *pci_func_0_dma_source(struct pci_dev *dev) +{ + if (!PCI_FUNC(dev->devfn)) + return pci_dev_get(dev); + + return pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); +} + +static const struct pci_dev_dma_source { + u16 vendor; + u16 device; + struct pci_dev *(*dma_source)(struct pci_dev *dev); +} pci_dev_dma_source[] = { + /* + * https://bugzilla.redhat.com/show_bug.cgi?id=605888 + * + * Some Ricoh devices use the function 0 source ID for DMA on + * other functions of a multifunction device. The DMA devices + * is therefore function 0, which will have implications of the + * iommu grouping of these devices. + */ + { PCI_VENDOR_ID_RICOH, 0xe822, pci_func_0_dma_source }, + { PCI_VENDOR_ID_RICOH, 0xe230, pci_func_0_dma_source }, + { PCI_VENDOR_ID_RICOH, 0xe832, pci_func_0_dma_source }, + { PCI_VENDOR_ID_RICOH, 0xe476, pci_func_0_dma_source }, + { 0 } +}; + +/* + * IOMMUs with isolation capabilities need to be programmed with the + * correct source ID of a device. In most cases, the source ID matches + * the device doing the DMA, but sometimes hardware is broken and will + * tag the DMA as being sourced from a different device. This function + * allows that translation. Note that the reference count of the + * returned device is incremented on all paths. + */ +struct pci_dev *pci_get_dma_source(struct pci_dev *dev) +{ + const struct pci_dev_dma_source *i; + + for (i = pci_dev_dma_source; i->dma_source; i++) { + if ((i->vendor == dev->vendor || + i->vendor == (u16)PCI_ANY_ID) && + (i->device == dev->device || + i->device == (u16)PCI_ANY_ID)) + return i->dma_source(dev); + } + + return pci_dev_get(dev); +} + +static const struct pci_dev_acs_enabled { + u16 vendor; + u16 device; + int (*acs_enabled)(struct pci_dev *dev, u16 acs_flags); +} pci_dev_acs_enabled[] = { + { 0 } +}; + +int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags) +{ + const struct pci_dev_acs_enabled *i; + int ret; + + /* + * Allow devices that do not expose standard PCIe ACS capabilities + * or control to indicate their support here. Multi-function express + * devices which do not allow internal peer-to-peer between functions, + * but do not implement PCIe ACS may wish to return true here. + */ + for (i = pci_dev_acs_enabled; i->acs_enabled; i++) { + if ((i->vendor == dev->vendor || + i->vendor == (u16)PCI_ANY_ID) && + (i->device == dev->device || + i->device == (u16)PCI_ANY_ID)) { + ret = i->acs_enabled(dev, acs_flags); + if (ret >= 0) + return ret; + } + } + + return -ENOTTY; +} |