aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/controller/pci-aardvark.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/controller/pci-aardvark.c')
-rw-r--r--drivers/pci/controller/pci-aardvark.c743
1 files changed, 592 insertions, 151 deletions
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index e3f5e7ab7606..c3b725afa11f 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -31,9 +31,6 @@
/* PCIe core registers */
#define PCIE_CORE_DEV_ID_REG 0x0
#define PCIE_CORE_CMD_STATUS_REG 0x4
-#define PCIE_CORE_CMD_IO_ACCESS_EN BIT(0)
-#define PCIE_CORE_CMD_MEM_ACCESS_EN BIT(1)
-#define PCIE_CORE_CMD_MEM_IO_REQ_EN BIT(2)
#define PCIE_CORE_DEV_REV_REG 0x8
#define PCIE_CORE_PCIEXP_CAP 0xc0
#define PCIE_CORE_ERR_CAPCTL_REG 0x118
@@ -57,7 +54,8 @@
#define PIO_COMPLETION_STATUS_UR 1
#define PIO_COMPLETION_STATUS_CRS 2
#define PIO_COMPLETION_STATUS_CA 4
-#define PIO_NON_POSTED_REQ BIT(0)
+#define PIO_NON_POSTED_REQ BIT(10)
+#define PIO_ERR_STATUS BIT(11)
#define PIO_ADDR_LS (PIO_BASE_ADDR + 0x8)
#define PIO_ADDR_MS (PIO_BASE_ADDR + 0xc)
#define PIO_WR_DATA (PIO_BASE_ADDR + 0x10)
@@ -98,6 +96,7 @@
#define PCIE_CORE_CTRL2_MSI_ENABLE BIT(10)
#define PCIE_CORE_REF_CLK_REG (CONTROL_BASE_ADDR + 0x14)
#define PCIE_CORE_REF_CLK_TX_ENABLE BIT(1)
+#define PCIE_CORE_REF_CLK_RX_ENABLE BIT(2)
#define PCIE_MSG_LOG_REG (CONTROL_BASE_ADDR + 0x30)
#define PCIE_ISR0_REG (CONTROL_BASE_ADDR + 0x40)
#define PCIE_MSG_PM_PME_MASK BIT(7)
@@ -105,27 +104,111 @@
#define PCIE_ISR0_MSI_INT_PENDING BIT(24)
#define PCIE_ISR0_INTX_ASSERT(val) BIT(16 + (val))
#define PCIE_ISR0_INTX_DEASSERT(val) BIT(20 + (val))
-#define PCIE_ISR0_ALL_MASK GENMASK(26, 0)
+#define PCIE_ISR0_ALL_MASK GENMASK(31, 0)
#define PCIE_ISR1_REG (CONTROL_BASE_ADDR + 0x48)
#define PCIE_ISR1_MASK_REG (CONTROL_BASE_ADDR + 0x4C)
#define PCIE_ISR1_POWER_STATE_CHANGE BIT(4)
#define PCIE_ISR1_FLUSH BIT(5)
#define PCIE_ISR1_INTX_ASSERT(val) BIT(8 + (val))
-#define PCIE_ISR1_ALL_MASK GENMASK(11, 4)
+#define PCIE_ISR1_ALL_MASK GENMASK(31, 0)
#define PCIE_MSI_ADDR_LOW_REG (CONTROL_BASE_ADDR + 0x50)
#define PCIE_MSI_ADDR_HIGH_REG (CONTROL_BASE_ADDR + 0x54)
#define PCIE_MSI_STATUS_REG (CONTROL_BASE_ADDR + 0x58)
#define PCIE_MSI_MASK_REG (CONTROL_BASE_ADDR + 0x5C)
#define PCIE_MSI_PAYLOAD_REG (CONTROL_BASE_ADDR + 0x9C)
+#define PCIE_MSI_DATA_MASK GENMASK(15, 0)
+
+/* PCIe window configuration */
+#define OB_WIN_BASE_ADDR 0x4c00
+#define OB_WIN_BLOCK_SIZE 0x20
+#define OB_WIN_COUNT 8
+#define OB_WIN_REG_ADDR(win, offset) (OB_WIN_BASE_ADDR + \
+ OB_WIN_BLOCK_SIZE * (win) + \
+ (offset))
+#define OB_WIN_MATCH_LS(win) OB_WIN_REG_ADDR(win, 0x00)
+#define OB_WIN_ENABLE BIT(0)
+#define OB_WIN_MATCH_MS(win) OB_WIN_REG_ADDR(win, 0x04)
+#define OB_WIN_REMAP_LS(win) OB_WIN_REG_ADDR(win, 0x08)
+#define OB_WIN_REMAP_MS(win) OB_WIN_REG_ADDR(win, 0x0c)
+#define OB_WIN_MASK_LS(win) OB_WIN_REG_ADDR(win, 0x10)
+#define OB_WIN_MASK_MS(win) OB_WIN_REG_ADDR(win, 0x14)
+#define OB_WIN_ACTIONS(win) OB_WIN_REG_ADDR(win, 0x18)
+#define OB_WIN_DEFAULT_ACTIONS (OB_WIN_ACTIONS(OB_WIN_COUNT-1) + 0x4)
+#define OB_WIN_FUNC_NUM_MASK GENMASK(31, 24)
+#define OB_WIN_FUNC_NUM_SHIFT 24
+#define OB_WIN_FUNC_NUM_ENABLE BIT(23)
+#define OB_WIN_BUS_NUM_BITS_MASK GENMASK(22, 20)
+#define OB_WIN_BUS_NUM_BITS_SHIFT 20
+#define OB_WIN_MSG_CODE_ENABLE BIT(22)
+#define OB_WIN_MSG_CODE_MASK GENMASK(21, 14)
+#define OB_WIN_MSG_CODE_SHIFT 14
+#define OB_WIN_MSG_PAYLOAD_LEN BIT(12)
+#define OB_WIN_ATTR_ENABLE BIT(11)
+#define OB_WIN_ATTR_TC_MASK GENMASK(10, 8)
+#define OB_WIN_ATTR_TC_SHIFT 8
+#define OB_WIN_ATTR_RELAXED BIT(7)
+#define OB_WIN_ATTR_NOSNOOP BIT(6)
+#define OB_WIN_ATTR_POISON BIT(5)
+#define OB_WIN_ATTR_IDO BIT(4)
+#define OB_WIN_TYPE_MASK GENMASK(3, 0)
+#define OB_WIN_TYPE_SHIFT 0
+#define OB_WIN_TYPE_MEM 0x0
+#define OB_WIN_TYPE_IO 0x4
+#define OB_WIN_TYPE_CONFIG_TYPE0 0x8
+#define OB_WIN_TYPE_CONFIG_TYPE1 0x9
+#define OB_WIN_TYPE_MSG 0xc
/* LMI registers base address and register offsets */
#define LMI_BASE_ADDR 0x6000
#define CFG_REG (LMI_BASE_ADDR + 0x0)
#define LTSSM_SHIFT 24
#define LTSSM_MASK 0x3f
-#define LTSSM_L0 0x10
#define RC_BAR_CONFIG 0x300
+/* LTSSM values in CFG_REG */
+enum {
+ LTSSM_DETECT_QUIET = 0x0,
+ LTSSM_DETECT_ACTIVE = 0x1,
+ LTSSM_POLLING_ACTIVE = 0x2,
+ LTSSM_POLLING_COMPLIANCE = 0x3,
+ LTSSM_POLLING_CONFIGURATION = 0x4,
+ LTSSM_CONFIG_LINKWIDTH_START = 0x5,
+ LTSSM_CONFIG_LINKWIDTH_ACCEPT = 0x6,
+ LTSSM_CONFIG_LANENUM_ACCEPT = 0x7,
+ LTSSM_CONFIG_LANENUM_WAIT = 0x8,
+ LTSSM_CONFIG_COMPLETE = 0x9,
+ LTSSM_CONFIG_IDLE = 0xa,
+ LTSSM_RECOVERY_RCVR_LOCK = 0xb,
+ LTSSM_RECOVERY_SPEED = 0xc,
+ LTSSM_RECOVERY_RCVR_CFG = 0xd,
+ LTSSM_RECOVERY_IDLE = 0xe,
+ LTSSM_L0 = 0x10,
+ LTSSM_RX_L0S_ENTRY = 0x11,
+ LTSSM_RX_L0S_IDLE = 0x12,
+ LTSSM_RX_L0S_FTS = 0x13,
+ LTSSM_TX_L0S_ENTRY = 0x14,
+ LTSSM_TX_L0S_IDLE = 0x15,
+ LTSSM_TX_L0S_FTS = 0x16,
+ LTSSM_L1_ENTRY = 0x17,
+ LTSSM_L1_IDLE = 0x18,
+ LTSSM_L2_IDLE = 0x19,
+ LTSSM_L2_TRANSMIT_WAKE = 0x1a,
+ LTSSM_DISABLED = 0x20,
+ LTSSM_LOOPBACK_ENTRY_MASTER = 0x21,
+ LTSSM_LOOPBACK_ACTIVE_MASTER = 0x22,
+ LTSSM_LOOPBACK_EXIT_MASTER = 0x23,
+ LTSSM_LOOPBACK_ENTRY_SLAVE = 0x24,
+ LTSSM_LOOPBACK_ACTIVE_SLAVE = 0x25,
+ LTSSM_LOOPBACK_EXIT_SLAVE = 0x26,
+ LTSSM_HOT_RESET = 0x27,
+ LTSSM_RECOVERY_EQUALIZATION_PHASE0 = 0x28,
+ LTSSM_RECOVERY_EQUALIZATION_PHASE1 = 0x29,
+ LTSSM_RECOVERY_EQUALIZATION_PHASE2 = 0x2a,
+ LTSSM_RECOVERY_EQUALIZATION_PHASE3 = 0x2b,
+};
+
+#define VENDOR_ID_REG (LMI_BASE_ADDR + 0x44)
+
/* PCIe core controller registers */
#define CTRL_CORE_BASE_ADDR 0x18000
#define CTRL_CONFIG_REG (CTRL_CORE_BASE_ADDR + 0x0)
@@ -156,7 +239,7 @@
#define PCIE_IRQ_MSI_INT2_DET BIT(21)
#define PCIE_IRQ_RC_DBELL_DET BIT(22)
#define PCIE_IRQ_EP_STATUS BIT(23)
-#define PCIE_IRQ_ALL_MASK 0xfff0fb
+#define PCIE_IRQ_ALL_MASK GENMASK(31, 0)
#define PCIE_IRQ_ENABLE_INTS_MASK PCIE_IRQ_CORE_INT
/* Transaction types */
@@ -165,7 +248,7 @@
#define PCIE_CONFIG_WR_TYPE0 0xa
#define PCIE_CONFIG_WR_TYPE1 0xb
-#define PIO_RETRY_CNT 500
+#define PIO_RETRY_CNT 750000 /* 1.5 s */
#define PIO_RETRY_DELAY 2 /* 2 us*/
#define LINK_WAIT_MAX_RETRIES 10
@@ -176,11 +259,21 @@
#define MSI_IRQ_NUM 32
+#define CFG_RD_CRS_VAL 0xffff0001
+
struct advk_pcie {
struct platform_device *pdev;
void __iomem *base;
+ struct {
+ phys_addr_t match;
+ phys_addr_t remap;
+ phys_addr_t mask;
+ u32 actions;
+ } wins[OB_WIN_COUNT];
+ u8 wins_count;
struct irq_domain *irq_domain;
struct irq_chip irq_chip;
+ raw_spinlock_t irq_lock;
struct irq_domain *msi_domain;
struct irq_domain *msi_inner_domain;
struct irq_chip msi_bottom_irq_chip;
@@ -205,18 +298,49 @@ static inline u32 advk_readl(struct advk_pcie *pcie, u64 reg)
return readl(pcie->base + reg);
}
-static inline u16 advk_read16(struct advk_pcie *pcie, u64 reg)
+static u8 advk_pcie_ltssm_state(struct advk_pcie *pcie)
{
- return advk_readl(pcie, (reg & ~0x3)) >> ((reg & 0x3) * 8);
+ u32 val;
+ u8 ltssm_state;
+
+ val = advk_readl(pcie, CFG_REG);
+ ltssm_state = (val >> LTSSM_SHIFT) & LTSSM_MASK;
+ return ltssm_state;
}
-static int advk_pcie_link_up(struct advk_pcie *pcie)
+static inline bool advk_pcie_link_up(struct advk_pcie *pcie)
{
- u32 val, ltssm_state;
+ /* check if LTSSM is in normal operation - some L* state */
+ u8 ltssm_state = advk_pcie_ltssm_state(pcie);
+ return ltssm_state >= LTSSM_L0 && ltssm_state < LTSSM_DISABLED;
+}
- val = advk_readl(pcie, CFG_REG);
- ltssm_state = (val >> LTSSM_SHIFT) & LTSSM_MASK;
- return ltssm_state >= LTSSM_L0;
+static inline bool advk_pcie_link_active(struct advk_pcie *pcie)
+{
+ /*
+ * According to PCIe Base specification 3.0, Table 4-14: Link
+ * Status Mapped to the LTSSM, and 4.2.6.3.6 Configuration.Idle
+ * is Link Up mapped to LTSSM Configuration.Idle, Recovery, L0,
+ * L0s, L1 and L2 states. And according to 3.2.1. Data Link
+ * Control and Management State Machine Rules is DL Up status
+ * reported in DL Active state.
+ */
+ u8 ltssm_state = advk_pcie_ltssm_state(pcie);
+ return ltssm_state >= LTSSM_CONFIG_IDLE && ltssm_state < LTSSM_DISABLED;
+}
+
+static inline bool advk_pcie_link_training(struct advk_pcie *pcie)
+{
+ /*
+ * According to PCIe Base specification 3.0, Table 4-14: Link
+ * Status Mapped to the LTSSM is Link Training mapped to LTSSM
+ * Configuration and Recovery states.
+ */
+ u8 ltssm_state = advk_pcie_ltssm_state(pcie);
+ return ((ltssm_state >= LTSSM_CONFIG_LINKWIDTH_START &&
+ ltssm_state < LTSSM_L0) ||
+ (ltssm_state >= LTSSM_RECOVERY_EQUALIZATION_PHASE0 &&
+ ltssm_state <= LTSSM_RECOVERY_EQUALIZATION_PHASE3));
}
static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
@@ -239,7 +363,7 @@ static void advk_pcie_wait_for_retrain(struct advk_pcie *pcie)
size_t retries;
for (retries = 0; retries < RETRAIN_WAIT_MAX_RETRIES; ++retries) {
- if (!advk_pcie_link_up(pcie))
+ if (advk_pcie_link_training(pcie))
break;
udelay(RETRAIN_WAIT_USLEEP_US);
}
@@ -247,23 +371,9 @@ static void advk_pcie_wait_for_retrain(struct advk_pcie *pcie)
static void advk_pcie_issue_perst(struct advk_pcie *pcie)
{
- u32 reg;
-
if (!pcie->reset_gpio)
return;
- /*
- * As required by PCI Express spec (PCI Express Base Specification, REV.
- * 4.0 PCI Express, February 19 2014, 6.6.1 Conventional Reset) a delay
- * for at least 100ms after de-asserting PERST# signal is needed before
- * link training is enabled. So ensure that link training is disabled
- * prior de-asserting PERST# signal to fulfill that PCI Express spec
- * requirement.
- */
- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- reg &= ~LINK_TRAINING_EN;
- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
/* 10ms delay is needed for some cards */
dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
gpiod_set_value_cansleep(pcie->reset_gpio, 1);
@@ -271,54 +381,47 @@ static void advk_pcie_issue_perst(struct advk_pcie *pcie)
gpiod_set_value_cansleep(pcie->reset_gpio, 0);
}
-static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen)
+static void advk_pcie_train_link(struct advk_pcie *pcie)
{
- int ret, neg_gen;
+ struct device *dev = &pcie->pdev->dev;
u32 reg;
+ int ret;
- /* Setup link speed */
+ /*
+ * Setup PCIe rev / gen compliance based on device tree property
+ * 'max-link-speed' which also forces maximal link speed.
+ */
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
reg &= ~PCIE_GEN_SEL_MSK;
- if (gen == 3)
+ if (pcie->link_gen == 3)
reg |= SPEED_GEN_3;
- else if (gen == 2)
+ else if (pcie->link_gen == 2)
reg |= SPEED_GEN_2;
else
reg |= SPEED_GEN_1;
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
/*
- * Enable link training. This is not needed in every call to this
- * function, just once suffices, but it does not break anything either.
+ * Set maximal link speed value also into PCIe Link Control 2 register.
+ * Armada 3700 Functional Specification says that default value is based
+ * on SPEED_GEN but tests showed that default value is always 8.0 GT/s.
*/
+ reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL2);
+ reg &= ~PCI_EXP_LNKCTL2_TLS;
+ if (pcie->link_gen == 3)
+ reg |= PCI_EXP_LNKCTL2_TLS_8_0GT;
+ else if (pcie->link_gen == 2)
+ reg |= PCI_EXP_LNKCTL2_TLS_5_0GT;
+ else
+ reg |= PCI_EXP_LNKCTL2_TLS_2_5GT;
+ advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL2);
+
+ /* Enable link training after selecting PCIe generation */
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
reg |= LINK_TRAINING_EN;
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
/*
- * Start link training immediately after enabling it.
- * This solves problems for some buggy cards.
- */
- reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
- reg |= PCI_EXP_LNKCTL_RL;
- advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
-
- ret = advk_pcie_wait_for_link(pcie);
- if (ret)
- return ret;
-
- reg = advk_read16(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKSTA);
- neg_gen = reg & PCI_EXP_LNKSTA_CLS;
-
- return neg_gen;
-}
-
-static void advk_pcie_train_link(struct advk_pcie *pcie)
-{
- struct device *dev = &pcie->pdev->dev;
- int neg_gen = -1, gen;
-
- /*
* Reset PCIe card via PERST# signal. Some cards are not detected
* during link training when they are in some non-initial state.
*/
@@ -328,50 +431,63 @@ static void advk_pcie_train_link(struct advk_pcie *pcie)
* PERST# signal could have been asserted by pinctrl subsystem before
* probe() callback has been called or issued explicitly by reset gpio
* function advk_pcie_issue_perst(), making the endpoint going into
- * fundamental reset. As required by PCI Express spec a delay for at
- * least 100ms after such a reset before link training is needed.
- */
- msleep(PCI_PM_D3COLD_WAIT);
-
- /*
- * Try link training at link gen specified by device tree property
- * 'max-link-speed'. If this fails, iteratively train at lower gen.
- */
- for (gen = pcie->link_gen; gen > 0; --gen) {
- neg_gen = advk_pcie_train_at_gen(pcie, gen);
- if (neg_gen > 0)
- break;
- }
-
- if (neg_gen < 0)
- goto err;
-
- /*
- * After successful training if negotiated gen is lower than requested,
- * train again on negotiated gen. This solves some stability issues for
- * some buggy gen1 cards.
+ * fundamental reset. As required by PCI Express spec (PCI Express
+ * Base Specification, REV. 4.0 PCI Express, February 19 2014, 6.6.1
+ * Conventional Reset) a delay for at least 100ms after such a reset
+ * before sending a Configuration Request to the device is needed.
+ * So wait until PCIe link is up. Function advk_pcie_wait_for_link()
+ * waits for link at least 900ms.
*/
- if (neg_gen < gen) {
- gen = neg_gen;
- neg_gen = advk_pcie_train_at_gen(pcie, gen);
- }
+ ret = advk_pcie_wait_for_link(pcie);
+ if (ret < 0)
+ dev_err(dev, "link never came up\n");
+ else
+ dev_info(dev, "link up\n");
+}
- if (neg_gen == gen) {
- dev_info(dev, "link up at gen %i\n", gen);
- return;
- }
+/*
+ * Set PCIe address window register which could be used for memory
+ * mapping.
+ */
+static void advk_pcie_set_ob_win(struct advk_pcie *pcie, u8 win_num,
+ phys_addr_t match, phys_addr_t remap,
+ phys_addr_t mask, u32 actions)
+{
+ advk_writel(pcie, OB_WIN_ENABLE |
+ lower_32_bits(match), OB_WIN_MATCH_LS(win_num));
+ advk_writel(pcie, upper_32_bits(match), OB_WIN_MATCH_MS(win_num));
+ advk_writel(pcie, lower_32_bits(remap), OB_WIN_REMAP_LS(win_num));
+ advk_writel(pcie, upper_32_bits(remap), OB_WIN_REMAP_MS(win_num));
+ advk_writel(pcie, lower_32_bits(mask), OB_WIN_MASK_LS(win_num));
+ advk_writel(pcie, upper_32_bits(mask), OB_WIN_MASK_MS(win_num));
+ advk_writel(pcie, actions, OB_WIN_ACTIONS(win_num));
+}
-err:
- dev_err(dev, "link never came up\n");
+static void advk_pcie_disable_ob_win(struct advk_pcie *pcie, u8 win_num)
+{
+ advk_writel(pcie, 0, OB_WIN_MATCH_LS(win_num));
+ advk_writel(pcie, 0, OB_WIN_MATCH_MS(win_num));
+ advk_writel(pcie, 0, OB_WIN_REMAP_LS(win_num));
+ advk_writel(pcie, 0, OB_WIN_REMAP_MS(win_num));
+ advk_writel(pcie, 0, OB_WIN_MASK_LS(win_num));
+ advk_writel(pcie, 0, OB_WIN_MASK_MS(win_num));
+ advk_writel(pcie, 0, OB_WIN_ACTIONS(win_num));
}
static void advk_pcie_setup_hw(struct advk_pcie *pcie)
{
u32 reg;
+ int i;
- /* Enable TX */
+ /*
+ * Configure PCIe Reference clock. Direction is from the PCIe
+ * controller to the endpoint card, so enable transmitting of
+ * Reference clock differential signal off-chip and disable
+ * receiving off-chip differential signal.
+ */
reg = advk_readl(pcie, PCIE_CORE_REF_CLK_REG);
reg |= PCIE_CORE_REF_CLK_TX_ENABLE;
+ reg &= ~PCIE_CORE_REF_CLK_RX_ENABLE;
advk_writel(pcie, reg, PCIE_CORE_REF_CLK_REG);
/* Set to Direct mode */
@@ -385,6 +501,41 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
reg |= (IS_RC_MSK << IS_RC_SHIFT);
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+ /*
+ * Replace incorrect PCI vendor id value 0x1b4b by correct value 0x11ab.
+ * VENDOR_ID_REG contains vendor id in low 16 bits and subsystem vendor
+ * id in high 16 bits. Updating this register changes readback value of
+ * read-only vendor id bits in PCIE_CORE_DEV_ID_REG register. Workaround
+ * for erratum 4.1: "The value of device and vendor ID is incorrect".
+ */
+ reg = (PCI_VENDOR_ID_MARVELL << 16) | PCI_VENDOR_ID_MARVELL;
+ advk_writel(pcie, reg, VENDOR_ID_REG);
+
+ /*
+ * Change Class Code of PCI Bridge device to PCI Bridge (0x600400),
+ * because the default value is Mass storage controller (0x010400).
+ *
+ * Note that this Aardvark PCI Bridge does not have compliant Type 1
+ * Configuration Space and it even cannot be accessed via Aardvark's
+ * PCI config space access method. Something like config space is
+ * available in internal Aardvark registers starting at offset 0x0
+ * and is reported as Type 0. In range 0x10 - 0x34 it has totally
+ * different registers.
+ *
+ * Therefore driver uses emulation of PCI Bridge which emulates
+ * access to configuration space via internal Aardvark registers or
+ * emulated configuration buffer.
+ */
+ reg = advk_readl(pcie, PCIE_CORE_DEV_REV_REG);
+ reg &= ~0xffffff00;
+ reg |= (PCI_CLASS_BRIDGE_PCI << 8) << 8;
+ advk_writel(pcie, reg, PCIE_CORE_DEV_REV_REG);
+
+ /* Disable Root Bridge I/O space, memory space and bus mastering */
+ reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
+ reg &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ advk_writel(pcie, reg, PCIE_CORE_CMD_STATUS_REG);
+
/* Set Advanced Error Capabilities and Control PF0 register */
reg = PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX |
PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN |
@@ -396,8 +547,9 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
reg &= ~PCI_EXP_DEVCTL_RELAX_EN;
reg &= ~PCI_EXP_DEVCTL_NOSNOOP_EN;
+ reg &= ~PCI_EXP_DEVCTL_PAYLOAD;
reg &= ~PCI_EXP_DEVCTL_READRQ;
- reg |= PCI_EXP_DEVCTL_PAYLOAD; /* Set max payload size */
+ reg |= PCI_EXP_DEVCTL_PAYLOAD_512B;
reg |= PCI_EXP_DEVCTL_READRQ_512B;
advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
@@ -436,67 +588,159 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
reg = PCIE_IRQ_ALL_MASK & (~PCIE_IRQ_ENABLE_INTS_MASK);
advk_writel(pcie, reg, HOST_CTRL_INT_MASK_REG);
+ /*
+ * Enable AXI address window location generation:
+ * When it is enabled, the default outbound window
+ * configurations (Default User Field: 0xD0074CFC)
+ * are used to transparent address translation for
+ * the outbound transactions. Thus, PCIe address
+ * windows are not required for transparent memory
+ * access when default outbound window configuration
+ * is set for memory access.
+ */
reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
reg |= PCIE_CORE_CTRL2_OB_WIN_ENABLE;
advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
- /* Bypass the address window mapping for PIO */
+ /*
+ * Set memory access in Default User Field so it
+ * is not required to configure PCIe address for
+ * transparent memory access.
+ */
+ advk_writel(pcie, OB_WIN_TYPE_MEM, OB_WIN_DEFAULT_ACTIONS);
+
+ /*
+ * Bypass the address window mapping for PIO:
+ * Since PIO access already contains all required
+ * info over AXI interface by PIO registers, the
+ * address window is not required.
+ */
reg = advk_readl(pcie, PIO_CTRL);
reg |= PIO_CTRL_ADDR_WIN_DISABLE;
advk_writel(pcie, reg, PIO_CTRL);
- advk_pcie_train_link(pcie);
-
/*
- * FIXME: The following register update is suspicious. This register is
- * applicable only when the PCI controller is configured for Endpoint
- * mode, not as a Root Complex. But apparently when this code is
- * removed, some cards stop working. This should be investigated and
- * a comment explaining this should be put here.
+ * Configure PCIe address windows for non-memory or
+ * non-transparent access as by default PCIe uses
+ * transparent memory access.
*/
- reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
- reg |= PCIE_CORE_CMD_MEM_ACCESS_EN |
- PCIE_CORE_CMD_IO_ACCESS_EN |
- PCIE_CORE_CMD_MEM_IO_REQ_EN;
- advk_writel(pcie, reg, PCIE_CORE_CMD_STATUS_REG);
+ for (i = 0; i < pcie->wins_count; i++)
+ advk_pcie_set_ob_win(pcie, i,
+ pcie->wins[i].match, pcie->wins[i].remap,
+ pcie->wins[i].mask, pcie->wins[i].actions);
+
+ /* Disable remaining PCIe outbound windows */
+ for (i = pcie->wins_count; i < OB_WIN_COUNT; i++)
+ advk_pcie_disable_ob_win(pcie, i);
+
+ advk_pcie_train_link(pcie);
}
-static void advk_pcie_check_pio_status(struct advk_pcie *pcie)
+static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u32 *val)
{
struct device *dev = &pcie->pdev->dev;
u32 reg;
unsigned int status;
char *strcomp_status, *str_posted;
+ int ret;
reg = advk_readl(pcie, PIO_STAT);
status = (reg & PIO_COMPLETION_STATUS_MASK) >>
PIO_COMPLETION_STATUS_SHIFT;
- if (!status)
- return;
-
+ /*
+ * According to HW spec, the PIO status check sequence as below:
+ * 1) even if COMPLETION_STATUS(bit9:7) indicates successful,
+ * it still needs to check Error Status(bit11), only when this bit
+ * indicates no error happen, the operation is successful.
+ * 2) value Unsupported Request(1) of COMPLETION_STATUS(bit9:7) only
+ * means a PIO write error, and for PIO read it is successful with
+ * a read value of 0xFFFFFFFF.
+ * 3) value Completion Retry Status(CRS) of COMPLETION_STATUS(bit9:7)
+ * only means a PIO write error, and for PIO read it is successful
+ * with a read value of 0xFFFF0001.
+ * 4) value Completer Abort (CA) of COMPLETION_STATUS(bit9:7) means
+ * error for both PIO read and PIO write operation.
+ * 5) other errors are indicated as 'unknown'.
+ */
switch (status) {
+ case PIO_COMPLETION_STATUS_OK:
+ if (reg & PIO_ERR_STATUS) {
+ strcomp_status = "COMP_ERR";
+ ret = -EFAULT;
+ break;
+ }
+ /* Get the read result */
+ if (val)
+ *val = advk_readl(pcie, PIO_RD_DATA);
+ /* No error */
+ strcomp_status = NULL;
+ ret = 0;
+ break;
case PIO_COMPLETION_STATUS_UR:
strcomp_status = "UR";
+ ret = -EOPNOTSUPP;
break;
case PIO_COMPLETION_STATUS_CRS:
+ if (allow_crs && val) {
+ /* PCIe r4.0, sec 2.3.2, says:
+ * If CRS Software Visibility is enabled:
+ * For a Configuration Read Request that includes both
+ * bytes of the Vendor ID field of a device Function's
+ * Configuration Space Header, the Root Complex must
+ * complete the Request to the host by returning a
+ * read-data value of 0001h for the Vendor ID field and
+ * all '1's for any additional bytes included in the
+ * request.
+ *
+ * So CRS in this case is not an error status.
+ */
+ *val = CFG_RD_CRS_VAL;
+ strcomp_status = NULL;
+ ret = 0;
+ break;
+ }
+ /* PCIe r4.0, sec 2.3.2, says:
+ * If CRS Software Visibility is not enabled, the Root Complex
+ * must re-issue the Configuration Request as a new Request.
+ * If CRS Software Visibility is enabled: For a Configuration
+ * Write Request or for any other Configuration Read Request,
+ * the Root Complex must re-issue the Configuration Request as
+ * a new Request.
+ * A Root Complex implementation may choose to limit the number
+ * of Configuration Request/CRS Completion Status loops before
+ * determining that something is wrong with the target of the
+ * Request and taking appropriate action, e.g., complete the
+ * Request to the host as a failed transaction.
+ *
+ * So return -EAGAIN and caller (pci-aardvark.c driver) will
+ * re-issue request again up to the PIO_RETRY_CNT retries.
+ */
strcomp_status = "CRS";
+ ret = -EAGAIN;
break;
case PIO_COMPLETION_STATUS_CA:
strcomp_status = "CA";
+ ret = -ECANCELED;
break;
default:
strcomp_status = "Unknown";
+ ret = -EINVAL;
break;
}
+ if (!strcomp_status)
+ return ret;
+
if (reg & PIO_NON_POSTED_REQ)
str_posted = "Non-posted";
else
str_posted = "Posted";
- dev_err(dev, "%s PIO Response Status: %s, %#x @ %#x\n",
+ dev_dbg(dev, "%s PIO Response Status: %s, %#x @ %#x\n",
str_posted, strcomp_status, reg, advk_readl(pcie, PIO_ADDR_LS));
+
+ return ret;
}
static int advk_pcie_wait_pio(struct advk_pcie *pcie)
@@ -504,13 +748,13 @@ static int advk_pcie_wait_pio(struct advk_pcie *pcie)
struct device *dev = &pcie->pdev->dev;
int i;
- for (i = 0; i < PIO_RETRY_CNT; i++) {
+ for (i = 1; i <= PIO_RETRY_CNT; i++) {
u32 start, isr;
start = advk_readl(pcie, PIO_START);
isr = advk_readl(pcie, PIO_ISR);
if (!start && isr)
- return 0;
+ return i;
udelay(PIO_RETRY_DELAY);
}
@@ -518,6 +762,64 @@ static int advk_pcie_wait_pio(struct advk_pcie *pcie)
return -ETIMEDOUT;
}
+static pci_bridge_emul_read_status_t
+advk_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge,
+ int reg, u32 *value)
+{
+ struct advk_pcie *pcie = bridge->data;
+
+ switch (reg) {
+ case PCI_COMMAND:
+ *value = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
+ return PCI_BRIDGE_EMUL_HANDLED;
+
+ case PCI_INTERRUPT_LINE: {
+ /*
+ * From the whole 32bit register we support reading from HW only
+ * one bit: PCI_BRIDGE_CTL_BUS_RESET.
+ * Other bits are retrieved only from emulated config buffer.
+ */
+ __le32 *cfgspace = (__le32 *)&bridge->conf;
+ u32 val = le32_to_cpu(cfgspace[PCI_INTERRUPT_LINE / 4]);
+ if (advk_readl(pcie, PCIE_CORE_CTRL1_REG) & HOT_RESET_GEN)
+ val |= PCI_BRIDGE_CTL_BUS_RESET << 16;
+ else
+ val &= ~(PCI_BRIDGE_CTL_BUS_RESET << 16);
+ *value = val;
+ return PCI_BRIDGE_EMUL_HANDLED;
+ }
+
+ default:
+ return PCI_BRIDGE_EMUL_NOT_HANDLED;
+ }
+}
+
+static void
+advk_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
+ int reg, u32 old, u32 new, u32 mask)
+{
+ struct advk_pcie *pcie = bridge->data;
+
+ switch (reg) {
+ case PCI_COMMAND:
+ advk_writel(pcie, new, PCIE_CORE_CMD_STATUS_REG);
+ break;
+
+ case PCI_INTERRUPT_LINE:
+ if (mask & (PCI_BRIDGE_CTL_BUS_RESET << 16)) {
+ u32 val = advk_readl(pcie, PCIE_CORE_CTRL1_REG);
+ if (new & (PCI_BRIDGE_CTL_BUS_RESET << 16))
+ val |= HOT_RESET_GEN;
+ else
+ val &= ~HOT_RESET_GEN;
+ advk_writel(pcie, val, PCIE_CORE_CTRL1_REG);
+ }
+ break;
+
+ default:
+ break;
+ }
+}
static pci_bridge_emul_read_status_t
advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
@@ -534,6 +836,8 @@ advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
case PCI_EXP_RTCTL: {
u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG);
*value = (val & PCIE_MSG_PM_PME_MASK) ? 0 : PCI_EXP_RTCTL_PMEIE;
+ *value |= le16_to_cpu(bridge->pcie_conf.rootctl) & PCI_EXP_RTCTL_CRSSVE;
+ *value |= PCI_EXP_RTCAP_CRSVIS << 16;
return PCI_BRIDGE_EMUL_HANDLED;
}
@@ -544,12 +848,26 @@ advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
return PCI_BRIDGE_EMUL_HANDLED;
}
+ case PCI_EXP_LNKCAP: {
+ u32 val = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg);
+ /*
+ * PCI_EXP_LNKCAP_DLLLARC bit is hardwired in aardvark HW to 0.
+ * But support for PCI_EXP_LNKSTA_DLLLA is emulated via ltssm
+ * state so explicitly enable PCI_EXP_LNKCAP_DLLLARC flag.
+ */
+ val |= PCI_EXP_LNKCAP_DLLLARC;
+ *value = val;
+ return PCI_BRIDGE_EMUL_HANDLED;
+ }
+
case PCI_EXP_LNKCTL: {
/* u32 contains both PCI_EXP_LNKCTL and PCI_EXP_LNKSTA */
u32 val = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg) &
~(PCI_EXP_LNKSTA_LT << 16);
- if (!advk_pcie_link_up(pcie))
+ if (advk_pcie_link_training(pcie))
val |= (PCI_EXP_LNKSTA_LT << 16);
+ if (advk_pcie_link_active(pcie))
+ val |= (PCI_EXP_LNKSTA_DLLLA << 16);
*value = val;
return PCI_BRIDGE_EMUL_HANDLED;
}
@@ -557,7 +875,6 @@ advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
case PCI_CAP_LIST_ID:
case PCI_EXP_DEVCAP:
case PCI_EXP_DEVCTL:
- case PCI_EXP_LNKCAP:
*value = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg);
return PCI_BRIDGE_EMUL_HANDLED;
default:
@@ -604,6 +921,8 @@ advk_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
}
static struct pci_bridge_emul_ops advk_pci_bridge_emul_ops = {
+ .read_base = advk_pci_bridge_emul_base_conf_read,
+ .write_base = advk_pci_bridge_emul_base_conf_write,
.read_pcie = advk_pci_bridge_emul_pcie_conf_read,
.write_pcie = advk_pci_bridge_emul_pcie_conf_write,
};
@@ -634,6 +953,9 @@ static int advk_sw_pci_bridge_init(struct advk_pcie *pcie)
/* Support interrupt A for MSI feature */
bridge->conf.intpin = PCIE_CORE_INT_A_ASSERT_ENABLE;
+ /* Indicates supports for Completion Retry Status */
+ bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);
+
bridge->has_pcie = true;
bridge->data = pcie;
bridge->ops = &advk_pci_bridge_emul_ops;
@@ -690,6 +1012,8 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
int where, int size, u32 *val)
{
struct advk_pcie *pcie = bus->sysdata;
+ int retry_count;
+ bool allow_crs;
u32 reg;
int ret;
@@ -702,10 +1026,17 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
return pci_bridge_emul_conf_read(&pcie->bridge, where,
size, val);
- if (advk_pcie_pio_is_running(pcie)) {
- *val = 0xffffffff;
- return PCIBIOS_SET_FAILED;
- }
+ /*
+ * Completion Retry Status is possible to return only when reading all
+ * 4 bytes from PCI_VENDOR_ID and PCI_DEVICE_ID registers at once and
+ * CRSSVE flag on Root Bridge is enabled.
+ */
+ allow_crs = (where == PCI_VENDOR_ID) && (size == 4) &&
+ (le16_to_cpu(pcie->bridge.pcie_conf.rootctl) &
+ PCI_EXP_RTCTL_CRSSVE);
+
+ if (advk_pcie_pio_is_running(pcie))
+ goto try_crs;
/* Program the control register */
reg = advk_readl(pcie, PIO_CTRL);
@@ -724,26 +1055,45 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
/* Program the data strobe */
advk_writel(pcie, 0xf, PIO_WR_DATA_STRB);
- /* Clear PIO DONE ISR and start the transfer */
- advk_writel(pcie, 1, PIO_ISR);
- advk_writel(pcie, 1, PIO_START);
+ retry_count = 0;
+ do {
+ /* Clear PIO DONE ISR and start the transfer */
+ advk_writel(pcie, 1, PIO_ISR);
+ advk_writel(pcie, 1, PIO_START);
- ret = advk_pcie_wait_pio(pcie);
- if (ret < 0) {
- *val = 0xffffffff;
- return PCIBIOS_SET_FAILED;
- }
+ ret = advk_pcie_wait_pio(pcie);
+ if (ret < 0)
+ goto try_crs;
+
+ retry_count += ret;
- advk_pcie_check_pio_status(pcie);
+ /* Check PIO status and get the read result */
+ ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
+ } while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT);
+
+ if (ret < 0)
+ goto fail;
- /* Get the read result */
- *val = advk_readl(pcie, PIO_RD_DATA);
if (size == 1)
*val = (*val >> (8 * (where & 3))) & 0xff;
else if (size == 2)
*val = (*val >> (8 * (where & 3))) & 0xffff;
return PCIBIOS_SUCCESSFUL;
+
+try_crs:
+ /*
+ * If it is possible, return Completion Retry Status so that caller
+ * tries to issue the request again instead of failing.
+ */
+ if (allow_crs) {
+ *val = CFG_RD_CRS_VAL;
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+fail:
+ *val = 0xffffffff;
+ return PCIBIOS_SET_FAILED;
}
static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
@@ -752,6 +1102,7 @@ static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
struct advk_pcie *pcie = bus->sysdata;
u32 reg;
u32 data_strobe = 0x0;
+ int retry_count;
int offset;
int ret;
@@ -793,17 +1144,22 @@ static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
/* Program the data strobe */
advk_writel(pcie, data_strobe, PIO_WR_DATA_STRB);
- /* Clear PIO DONE ISR and start the transfer */
- advk_writel(pcie, 1, PIO_ISR);
- advk_writel(pcie, 1, PIO_START);
+ retry_count = 0;
+ do {
+ /* Clear PIO DONE ISR and start the transfer */
+ advk_writel(pcie, 1, PIO_ISR);
+ advk_writel(pcie, 1, PIO_START);
- ret = advk_pcie_wait_pio(pcie);
- if (ret < 0)
- return PCIBIOS_SET_FAILED;
+ ret = advk_pcie_wait_pio(pcie);
+ if (ret < 0)
+ return PCIBIOS_SET_FAILED;
- advk_pcie_check_pio_status(pcie);
+ retry_count += ret;
- return PCIBIOS_SUCCESSFUL;
+ ret = advk_pcie_check_pio_status(pcie, false, NULL);
+ } while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT);
+
+ return ret < 0 ? PCIBIOS_SET_FAILED : PCIBIOS_SUCCESSFUL;
}
static struct pci_ops advk_pcie_ops = {
@@ -852,7 +1208,7 @@ static int advk_msi_irq_domain_alloc(struct irq_domain *domain,
domain->host_data, handle_simple_irq,
NULL, NULL);
- return hwirq;
+ return 0;
}
static void advk_msi_irq_domain_free(struct irq_domain *domain,
@@ -875,22 +1231,28 @@ static void advk_pcie_irq_mask(struct irq_data *d)
{
struct advk_pcie *pcie = d->domain->host_data;
irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ unsigned long flags;
u32 mask;
+ raw_spin_lock_irqsave(&pcie->irq_lock, flags);
mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
mask |= PCIE_ISR1_INTX_ASSERT(hwirq);
advk_writel(pcie, mask, PCIE_ISR1_MASK_REG);
+ raw_spin_unlock_irqrestore(&pcie->irq_lock, flags);
}
static void advk_pcie_irq_unmask(struct irq_data *d)
{
struct advk_pcie *pcie = d->domain->host_data;
irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ unsigned long flags;
u32 mask;
+ raw_spin_lock_irqsave(&pcie->irq_lock, flags);
mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
mask &= ~PCIE_ISR1_INTX_ASSERT(hwirq);
advk_writel(pcie, mask, PCIE_ISR1_MASK_REG);
+ raw_spin_unlock_irqrestore(&pcie->irq_lock, flags);
}
static int advk_pcie_irq_map(struct irq_domain *h,
@@ -974,6 +1336,8 @@ static int advk_pcie_init_irq_domain(struct advk_pcie *pcie)
struct irq_chip *irq_chip;
int ret = 0;
+ raw_spin_lock_init(&pcie->irq_lock);
+
pcie_intc_node = of_get_next_child(node, NULL);
if (!pcie_intc_node) {
dev_err(dev, "No PCIe Intc node found\n");
@@ -1025,8 +1389,12 @@ static void advk_pcie_handle_msi(struct advk_pcie *pcie)
if (!(BIT(msi_idx) & msi_status))
continue;
+ /*
+ * msi_idx contains bits [4:0] of the msi_data and msi_data
+ * contains 16bit MSI interrupt number
+ */
advk_writel(pcie, BIT(msi_idx), PCIE_MSI_STATUS_REG);
- msi_data = advk_readl(pcie, PCIE_MSI_PAYLOAD_REG) & 0xFF;
+ msi_data = advk_readl(pcie, PCIE_MSI_PAYLOAD_REG) & PCIE_MSI_DATA_MASK;
generic_handle_irq(msi_data);
}
@@ -1038,7 +1406,7 @@ static void advk_pcie_handle_int(struct advk_pcie *pcie)
{
u32 isr0_val, isr0_mask, isr0_status;
u32 isr1_val, isr1_mask, isr1_status;
- int i, virq;
+ int i;
isr0_val = advk_readl(pcie, PCIE_ISR0_REG);
isr0_mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
@@ -1048,12 +1416,6 @@ static void advk_pcie_handle_int(struct advk_pcie *pcie)
isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK);
- if (!isr0_status && !isr1_status) {
- advk_writel(pcie, isr0_val, PCIE_ISR0_REG);
- advk_writel(pcie, isr1_val, PCIE_ISR1_REG);
- return;
- }
-
/* Process MSI interrupts */
if (isr0_status & PCIE_ISR0_MSI_INT_PENDING)
advk_pcie_handle_msi(pcie);
@@ -1066,8 +1428,7 @@ static void advk_pcie_handle_int(struct advk_pcie *pcie)
advk_writel(pcie, PCIE_ISR1_INTX_ASSERT(i),
PCIE_ISR1_REG);
- virq = irq_find_mapping(pcie->irq_domain, i);
- generic_handle_irq(virq);
+ generic_handle_domain_irq(pcie->irq_domain, i);
}
}
@@ -1151,6 +1512,7 @@ static int advk_pcie_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct advk_pcie *pcie;
struct pci_host_bridge *bridge;
+ struct resource_entry *entry;
int ret, irq;
bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct advk_pcie));
@@ -1161,6 +1523,80 @@ static int advk_pcie_probe(struct platform_device *pdev)
pcie->pdev = pdev;
platform_set_drvdata(pdev, pcie);
+ resource_list_for_each_entry(entry, &bridge->windows) {
+ resource_size_t start = entry->res->start;
+ resource_size_t size = resource_size(entry->res);
+ unsigned long type = resource_type(entry->res);
+ u64 win_size;
+
+ /*
+ * Aardvark hardware allows to configure also PCIe window
+ * for config type 0 and type 1 mapping, but driver uses
+ * only PIO for issuing configuration transfers which does
+ * not use PCIe window configuration.
+ */
+ if (type != IORESOURCE_MEM && type != IORESOURCE_MEM_64 &&
+ type != IORESOURCE_IO)
+ continue;
+
+ /*
+ * Skip transparent memory resources. Default outbound access
+ * configuration is set to transparent memory access so it
+ * does not need window configuration.
+ */
+ if ((type == IORESOURCE_MEM || type == IORESOURCE_MEM_64) &&
+ entry->offset == 0)
+ continue;
+
+ /*
+ * The n-th PCIe window is configured by tuple (match, remap, mask)
+ * and an access to address A uses this window if A matches the
+ * match with given mask.
+ * So every PCIe window size must be a power of two and every start
+ * address must be aligned to window size. Minimal size is 64 KiB
+ * because lower 16 bits of mask must be zero. Remapped address
+ * may have set only bits from the mask.
+ */
+ while (pcie->wins_count < OB_WIN_COUNT && size > 0) {
+ /* Calculate the largest aligned window size */
+ win_size = (1ULL << (fls64(size)-1)) |
+ (start ? (1ULL << __ffs64(start)) : 0);
+ win_size = 1ULL << __ffs64(win_size);
+ if (win_size < 0x10000)
+ break;
+
+ dev_dbg(dev,
+ "Configuring PCIe window %d: [0x%llx-0x%llx] as %lu\n",
+ pcie->wins_count, (unsigned long long)start,
+ (unsigned long long)start + win_size, type);
+
+ if (type == IORESOURCE_IO) {
+ pcie->wins[pcie->wins_count].actions = OB_WIN_TYPE_IO;
+ pcie->wins[pcie->wins_count].match = pci_pio_to_address(start);
+ } else {
+ pcie->wins[pcie->wins_count].actions = OB_WIN_TYPE_MEM;
+ pcie->wins[pcie->wins_count].match = start;
+ }
+ pcie->wins[pcie->wins_count].remap = start - entry->offset;
+ pcie->wins[pcie->wins_count].mask = ~(win_size - 1);
+
+ if (pcie->wins[pcie->wins_count].remap & (win_size - 1))
+ break;
+
+ start += win_size;
+ size -= win_size;
+ pcie->wins_count++;
+ }
+
+ if (size > 0) {
+ dev_err(&pcie->pdev->dev,
+ "Invalid PCIe region [0x%llx-0x%llx]\n",
+ (unsigned long long)entry->res->start,
+ (unsigned long long)entry->res->end + 1);
+ return -EINVAL;
+ }
+ }
+
pcie->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(pcie->base))
return PTR_ERR(pcie->base);
@@ -1241,6 +1677,7 @@ static int advk_pcie_remove(struct platform_device *pdev)
{
struct advk_pcie *pcie = platform_get_drvdata(pdev);
struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
+ int i;
pci_lock_rescan_remove();
pci_stop_root_bus(bridge->bus);
@@ -1250,6 +1687,10 @@ static int advk_pcie_remove(struct platform_device *pdev)
advk_pcie_remove_msi_irq_domain(pcie);
advk_pcie_remove_irq_domain(pcie);
+ /* Disable outbound address windows mapping */
+ for (i = 0; i < OB_WIN_COUNT; i++)
+ advk_pcie_disable_ob_win(pcie, i);
+
return 0;
}