diff options
Diffstat (limited to 'drivers/pci/controller/dwc/pci-keystone.c')
| -rw-r--r-- | drivers/pci/controller/dwc/pci-keystone.c | 52 |
1 files changed, 18 insertions, 34 deletions
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c index cff5bca45878..57135eee2d7d 100644 --- a/drivers/pci/controller/dwc/pci-keystone.c +++ b/drivers/pci/controller/dwc/pci-keystone.c @@ -289,6 +289,24 @@ static void ks_pcie_clear_dbi_mode(struct keystone_pcie *ks_pcie) static int ks_pcie_msi_host_init(struct dw_pcie_rp *pp) { + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); + + /* Configure and set up BAR0 */ + ks_pcie_set_dbi_mode(ks_pcie); + + /* Enable BAR0 */ + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1); + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1); + + ks_pcie_clear_dbi_mode(ks_pcie); + + /* + * For BAR0, just setting bus address for inbound writes (MSI) should + * be sufficient. Use physical address to avoid any conflicts. + */ + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start); + pp->msi_irq_chip = &ks_pcie_msi_irq_chip; return dw_pcie_allocate_domains(pp); } @@ -445,44 +463,10 @@ static struct pci_ops ks_child_pcie_ops = { .write = pci_generic_config_write, }; -/** - * ks_pcie_v3_65_add_bus() - keystone add_bus post initialization - * @bus: A pointer to the PCI bus structure. - * - * This sets BAR0 to enable inbound access for MSI_IRQ register - */ -static int ks_pcie_v3_65_add_bus(struct pci_bus *bus) -{ - struct dw_pcie_rp *pp = bus->sysdata; - struct dw_pcie *pci = to_dw_pcie_from_pp(pp); - struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); - - if (!pci_is_root_bus(bus)) - return 0; - - /* Configure and set up BAR0 */ - ks_pcie_set_dbi_mode(ks_pcie); - - /* Enable BAR0 */ - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1); - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1); - - ks_pcie_clear_dbi_mode(ks_pcie); - - /* - * For BAR0, just setting bus address for inbound writes (MSI) should - * be sufficient. Use physical address to avoid any conflicts. - */ - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start); - - return 0; -} - static struct pci_ops ks_pcie_ops = { .map_bus = dw_pcie_own_conf_map_bus, .read = pci_generic_config_read, .write = pci_generic_config_write, - .add_bus = ks_pcie_v3_65_add_bus, }; /** |