diff options
Diffstat (limited to 'drivers/net/wireless')
56 files changed, 369 insertions, 956 deletions
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c index a105087af963..f9aa1bc0a947 100644 --- a/drivers/net/wireless/adm8211.c +++ b/drivers/net/wireless/adm8211.c @@ -732,7 +732,7 @@ static int adm8211_rf_set_channel(struct ieee80211_hw *dev, unsigned int chan) /* Nothing to do for ADMtek BBP */ } else if (priv->bbp_type != ADM8211_TYPE_ADMTEK) - wiphy_debug(dev->wiphy, "unsupported bbp type %d\n", + wiphy_debug(dev->wiphy, "unsupported BBP type %d\n", priv->bbp_type); ADM8211_RESTORE(); @@ -1032,7 +1032,7 @@ static int adm8211_hw_init_bbp(struct ieee80211_hw *dev) break; } } else - wiphy_debug(dev->wiphy, "unsupported bbp %d\n", priv->bbp_type); + wiphy_debug(dev->wiphy, "unsupported BBP %d\n", priv->bbp_type); ADM8211_CSR_WRITE(SYNRF, 0); @@ -1525,7 +1525,7 @@ static int adm8211_start(struct ieee80211_hw *dev) retval = request_irq(priv->pdev->irq, adm8211_interrupt, IRQF_SHARED, "adm8211", dev); if (retval) { - wiphy_err(dev->wiphy, "failed to register irq handler\n"); + wiphy_err(dev->wiphy, "failed to register IRQ handler\n"); goto fail; } @@ -1902,7 +1902,7 @@ static int __devinit adm8211_probe(struct pci_dev *pdev, goto err_free_eeprom; } - wiphy_info(dev->wiphy, "hwaddr %pm, rev 0x%02x\n", + wiphy_info(dev->wiphy, "hwaddr %pM, Rev 0x%02x\n", dev->wiphy->perm_addr, pdev->revision); return 0; diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 1d05445d4ba3..ce77575e88b3 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -4430,21 +4430,24 @@ static const struct file_operations proc_statsdelta_ops = { .owner = THIS_MODULE, .read = proc_read, .open = proc_statsdelta_open, - .release = proc_close + .release = proc_close, + .llseek = default_llseek, }; static const struct file_operations proc_stats_ops = { .owner = THIS_MODULE, .read = proc_read, .open = proc_stats_open, - .release = proc_close + .release = proc_close, + .llseek = default_llseek, }; static const struct file_operations proc_status_ops = { .owner = THIS_MODULE, .read = proc_read, .open = proc_status_open, - .release = proc_close + .release = proc_close, + .llseek = default_llseek, }; static const struct file_operations proc_SSID_ops = { @@ -4452,7 +4455,8 @@ static const struct file_operations proc_SSID_ops = { .read = proc_read, .write = proc_write, .open = proc_SSID_open, - .release = proc_close + .release = proc_close, + .llseek = default_llseek, }; static const struct file_operations proc_BSSList_ops = { @@ -4460,7 +4464,8 @@ static const struct file_operations proc_BSSList_ops = { .read = proc_read, .write = proc_write, .open = proc_BSSList_open, - .release = proc_close + .release = proc_close, + .llseek = default_llseek, }; static const struct file_operations proc_APList_ops = { @@ -4468,7 +4473,8 @@ static const struct file_operations proc_APList_ops = { .read = proc_read, .write = proc_write, .open = proc_APList_open, - .release = proc_close + .release = proc_close, + .llseek = default_llseek, }; static const struct file_operations proc_config_ops = { @@ -4476,7 +4482,8 @@ static const struct file_operations proc_config_ops = { .read = proc_read, .write = proc_write, .open = proc_config_open, - .release = proc_close + .release = proc_close, + .llseek = default_llseek, }; static const struct file_operations proc_wepkey_ops = { @@ -4484,7 +4491,8 @@ static const struct file_operations proc_wepkey_ops = { .read = proc_read, .write = proc_write, .open = proc_wepkey_open, - .release = proc_close + .release = proc_close, + .llseek = default_llseek, }; static struct proc_dir_entry *airo_entry; diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 9a121a5b787c..df2484d45474 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -32,7 +32,6 @@ #include <linux/timer.h> #include <linux/netdevice.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -54,58 +53,21 @@ MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards"); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the airo_cs - event handler. -*/ - static int airo_config(struct pcmcia_device *link); static void airo_release(struct pcmcia_device *link); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void airo_detach(struct pcmcia_device *p_dev); typedef struct local_info_t { struct net_device *eth_dev; } local_info_t; -/*====================================================================== - - airo_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - - ======================================================================*/ - static int airo_probe(struct pcmcia_device *p_dev) { local_info_t *local; dev_dbg(&p_dev->dev, "airo_attach()\n"); - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - p_dev->conf.Attributes = 0; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); if (!local) { @@ -117,15 +79,6 @@ static int airo_probe(struct pcmcia_device *p_dev) return airo_config(p_dev); } /* airo_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - - ======================================================================*/ - static void airo_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "airo_detach\n"); @@ -140,60 +93,12 @@ static void airo_detach(struct pcmcia_device *link) kfree(link->priv); } /* airo_detach */ -/*====================================================================== - - airo_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - - ======================================================================*/ - -static int airo_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int airo_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } @@ -206,20 +111,9 @@ static int airo_config(struct pcmcia_device *link) dev_dbg(&link->dev, "airo_config\n"); - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, airo_cs_config_check, NULL); if (ret) goto failed; @@ -227,12 +121,7 @@ static int airo_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; ((local_info_t *)link->priv)->eth_dev = @@ -241,17 +130,6 @@ static int airo_config(struct pcmcia_device *link) if (!((local_info_t *)link->priv)->eth_dev) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x: ", - link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); return 0; failed: @@ -259,14 +137,6 @@ static int airo_config(struct pcmcia_device *link) return -ENODEV; } /* airo_config */ -/*====================================================================== - - After a card is removed, airo_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - - ======================================================================*/ - static void airo_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "airo_release\n"); @@ -305,9 +175,7 @@ MODULE_DEVICE_TABLE(pcmcia, airo_ids); static struct pcmcia_driver airo_driver = { .owner = THIS_MODULE, - .drv = { - .name = "airo_cs", - }, + .name = "airo_cs", .probe = airo_probe, .remove = airo_detach, .id_table = airo_ids, @@ -315,12 +183,12 @@ static struct pcmcia_driver airo_driver = { .resume = airo_resume, }; -static int airo_cs_init(void) +static int __init airo_cs_init(void) { return pcmcia_register_driver(&airo_driver); } -static void airo_cs_cleanup(void) +static void __exit airo_cs_cleanup(void) { pcmcia_unregister_driver(&airo_driver); } diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index d5140a87f073..1128fa8c9ed5 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -655,7 +655,7 @@ static int at76_get_hw_config(struct at76_priv *priv) exit: kfree(hwcfg); if (ret < 0) - wiphy_err(priv->hw->wiphy, "cannot get hw config (error %d)\n", + wiphy_err(priv->hw->wiphy, "cannot get HW Config (error %d)\n", ret); return ret; @@ -960,7 +960,7 @@ static void at76_dump_mib_mac_addr(struct at76_priv *priv) sizeof(struct mib_mac_addr)); if (ret < 0) { wiphy_err(priv->hw->wiphy, - "at76_get_mib (mac_addr) failed: %d\n", ret); + "at76_get_mib (MAC_ADDR) failed: %d\n", ret); goto exit; } @@ -989,7 +989,7 @@ static void at76_dump_mib_mac_wep(struct at76_priv *priv) sizeof(struct mib_mac_wep)); if (ret < 0) { wiphy_err(priv->hw->wiphy, - "at76_get_mib (mac_wep) failed: %d\n", ret); + "at76_get_mib (MAC_WEP) failed: %d\n", ret); goto exit; } @@ -1026,7 +1026,7 @@ static void at76_dump_mib_mac_mgmt(struct at76_priv *priv) sizeof(struct mib_mac_mgmt)); if (ret < 0) { wiphy_err(priv->hw->wiphy, - "at76_get_mib (mac_mgmt) failed: %d\n", ret); + "at76_get_mib (MAC_MGMT) failed: %d\n", ret); goto exit; } @@ -1062,7 +1062,7 @@ static void at76_dump_mib_mac(struct at76_priv *priv) ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(struct mib_mac)); if (ret < 0) { wiphy_err(priv->hw->wiphy, - "at76_get_mib (mac) failed: %d\n", ret); + "at76_get_mib (MAC) failed: %d\n", ret); goto exit; } @@ -1099,7 +1099,7 @@ static void at76_dump_mib_phy(struct at76_priv *priv) ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(struct mib_phy)); if (ret < 0) { wiphy_err(priv->hw->wiphy, - "at76_get_mib (phy) failed: %d\n", ret); + "at76_get_mib (PHY) failed: %d\n", ret); goto exit; } @@ -1132,7 +1132,7 @@ static void at76_dump_mib_local(struct at76_priv *priv) ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(struct mib_local)); if (ret < 0) { wiphy_err(priv->hw->wiphy, - "at76_get_mib (local) failed: %d\n", ret); + "at76_get_mib (LOCAL) failed: %d\n", ret); goto exit; } @@ -1158,7 +1158,7 @@ static void at76_dump_mib_mdomain(struct at76_priv *priv) sizeof(struct mib_mdomain)); if (ret < 0) { wiphy_err(priv->hw->wiphy, - "at76_get_mib (mdomain) failed: %d\n", ret); + "at76_get_mib (MDOMAIN) failed: %d\n", ret); goto exit; } @@ -1229,7 +1229,7 @@ static int at76_submit_rx_urb(struct at76_priv *priv) struct sk_buff *skb = priv->rx_skb; if (!priv->rx_urb) { - wiphy_err(priv->hw->wiphy, "%s: priv->rx_urb is null\n", + wiphy_err(priv->hw->wiphy, "%s: priv->rx_urb is NULL\n", __func__); return -EFAULT; } @@ -1792,7 +1792,7 @@ static int at76_mac80211_tx(struct ieee80211_hw *hw, struct sk_buff *skb) wiphy_err(priv->hw->wiphy, "error in tx submit urb: %d\n", ret); if (ret == -EINVAL) wiphy_err(priv->hw->wiphy, - "-einval: tx urb %p hcpriv %p complete %p\n", + "-EINVAL: tx urb %p hcpriv %p complete %p\n", priv->tx_urb, priv->tx_urb->hcpriv, priv->tx_urb->complete); } @@ -2310,7 +2310,7 @@ static int at76_init_new_device(struct at76_priv *priv, priv->mac80211_registered = 1; - wiphy_info(priv->hw->wiphy, "usb %s, mac %pm, firmware %d.%d.%d-%d\n", + wiphy_info(priv->hw->wiphy, "USB %s, MAC %pM, firmware %d.%d.%d-%d\n", dev_name(&interface->dev), priv->mac_addr, priv->fw_version.major, priv->fw_version.minor, priv->fw_version.patch, priv->fw_version.build); diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index c67b05f3bcbd..debfb0fbc7c5 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -245,7 +245,7 @@ static void __ar9170_dump_txstats(struct ar9170 *ar) { int i; - wiphy_debug(ar->hw->wiphy, "qos queue stats\n"); + wiphy_debug(ar->hw->wiphy, "QoS queue stats\n"); for (i = 0; i < __AR9170_NUM_TXQ; i++) wiphy_debug(ar->hw->wiphy, @@ -387,7 +387,7 @@ static struct sk_buff *ar9170_get_queued_skb(struct ar9170 *ar, if (mac && compare_ether_addr(ieee80211_get_DA(hdr), mac)) { #ifdef AR9170_QUEUE_DEBUG wiphy_debug(ar->hw->wiphy, - "skip frame => da %pm != %pm\n", + "skip frame => DA %pM != %pM\n", mac, ieee80211_get_DA(hdr)); ar9170_print_txheader(ar, skb); #endif /* AR9170_QUEUE_DEBUG */ diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 373dcfec689c..d77ce9906b6c 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1327,6 +1327,10 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, PCI_DMA_TODEVICE); rate = ieee80211_get_tx_rate(sc->hw, info); + if (!rate) { + ret = -EINVAL; + goto err_unmap; + } if (info->flags & IEEE80211_TX_CTL_NO_ACK) flags |= AR5K_TXDESC_NOACK; diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c index 4cccc29964f6..fb339c3852ee 100644 --- a/drivers/net/wireless/ath/ath5k/debug.c +++ b/drivers/net/wireless/ath/ath5k/debug.c @@ -271,6 +271,7 @@ static const struct file_operations fops_beacon = { .write = write_file_beacon, .open = ath5k_debugfs_open, .owner = THIS_MODULE, + .llseek = default_llseek, }; @@ -290,6 +291,7 @@ static const struct file_operations fops_reset = { .write = write_file_reset, .open = ath5k_debugfs_open, .owner = THIS_MODULE, + .llseek = noop_llseek, }; @@ -369,6 +371,7 @@ static const struct file_operations fops_debug = { .write = write_file_debug, .open = ath5k_debugfs_open, .owner = THIS_MODULE, + .llseek = default_llseek, }; @@ -480,6 +483,7 @@ static const struct file_operations fops_antenna = { .write = write_file_antenna, .open = ath5k_debugfs_open, .owner = THIS_MODULE, + .llseek = default_llseek, }; @@ -591,6 +595,7 @@ static const struct file_operations fops_frameerrors = { .write = write_file_frameerrors, .open = ath5k_debugfs_open, .owner = THIS_MODULE, + .llseek = default_llseek, }; @@ -748,6 +753,7 @@ static const struct file_operations fops_ani = { .write = write_file_ani, .open = ath5k_debugfs_open, .owner = THIS_MODULE, + .llseek = default_llseek, }; @@ -811,6 +817,7 @@ static const struct file_operations fops_queue = { .write = write_file_queue, .open = ath5k_debugfs_open, .owner = THIS_MODULE, + .llseek = default_llseek, }; diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index cc648b6ae31c..a3d95cca8f0c 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -543,7 +543,7 @@ static u8 ath9k_hw_chan_2_clockrate_mhz(struct ath_hw *ah) if (conf_is_ht40(conf)) return clockrate * 2; - return clockrate * 2; + return clockrate; } static int32_t ath9k_hw_ani_get_listen_time(struct ath_hw *ah) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index b883b174385b..057fb69ddf7f 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -797,7 +797,7 @@ static bool ar9300_uncompress_block(struct ath_hw *ah, length = block[it+1]; length &= 0xff; - if (length > 0 && spot >= 0 && spot+length < mdataSize) { + if (length > 0 && spot >= 0 && spot+length <= mdataSize) { ath_print(common, ATH_DBG_EEPROM, "Restore at %d: spot=%d " "offset=%d length=%d\n", diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index 54aae931424e..cf500bf25ad5 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -71,7 +71,8 @@ static const struct file_operations fops_debug = { .read = read_file_debug, .write = write_file_debug, .open = ath9k_debugfs_open, - .owner = THIS_MODULE + .owner = THIS_MODULE, + .llseek = default_llseek, }; #endif @@ -116,7 +117,8 @@ static const struct file_operations fops_tx_chainmask = { .read = read_file_tx_chainmask, .write = write_file_tx_chainmask, .open = ath9k_debugfs_open, - .owner = THIS_MODULE + .owner = THIS_MODULE, + .llseek = default_llseek, }; @@ -158,7 +160,8 @@ static const struct file_operations fops_rx_chainmask = { .read = read_file_rx_chainmask, .write = write_file_rx_chainmask, .open = ath9k_debugfs_open, - .owner = THIS_MODULE + .owner = THIS_MODULE, + .llseek = default_llseek, }; @@ -259,7 +262,8 @@ static ssize_t read_file_dma(struct file *file, char __user *user_buf, static const struct file_operations fops_dma = { .read = read_file_dma, .open = ath9k_debugfs_open, - .owner = THIS_MODULE + .owner = THIS_MODULE, + .llseek = default_llseek, }; @@ -375,7 +379,8 @@ static ssize_t read_file_interrupt(struct file *file, char __user *user_buf, static const struct file_operations fops_interrupt = { .read = read_file_interrupt, .open = ath9k_debugfs_open, - .owner = THIS_MODULE + .owner = THIS_MODULE, + .llseek = default_llseek, }; void ath_debug_stat_rc(struct ath_softc *sc, int final_rate) @@ -464,7 +469,8 @@ static ssize_t read_file_rcstat(struct file *file, char __user *user_buf, static const struct file_operations fops_rcstat = { .read = read_file_rcstat, .open = ath9k_debugfs_open, - .owner = THIS_MODULE + .owner = THIS_MODULE, + .llseek = default_llseek, }; static const char * ath_wiphy_state_str(enum ath_wiphy_state state) @@ -623,7 +629,8 @@ static const struct file_operations fops_wiphy = { .read = read_file_wiphy, .write = write_file_wiphy, .open = ath9k_debugfs_open, - .owner = THIS_MODULE + .owner = THIS_MODULE, + .llseek = default_llseek, }; #define PR(str, elem) \ @@ -702,7 +709,8 @@ void ath_debug_stat_tx(struct ath_softc *sc, struct ath_txq *txq, static const struct file_operations fops_xmit = { .read = read_file_xmit, .open = ath9k_debugfs_open, - .owner = THIS_MODULE + .owner = THIS_MODULE, + .llseek = default_llseek, }; static ssize_t read_file_recv(struct file *file, char __user *user_buf, @@ -814,7 +822,8 @@ void ath_debug_stat_rx(struct ath_softc *sc, struct ath_rx_status *rs) static const struct file_operations fops_recv = { .read = read_file_recv, .open = ath9k_debugfs_open, - .owner = THIS_MODULE + .owner = THIS_MODULE, + .llseek = default_llseek, }; static ssize_t read_file_regidx(struct file *file, char __user *user_buf, @@ -852,7 +861,8 @@ static const struct file_operations fops_regidx = { .read = read_file_regidx, .write = write_file_regidx, .open = ath9k_debugfs_open, - .owner = THIS_MODULE + .owner = THIS_MODULE, + .llseek = default_llseek, }; static ssize_t read_file_regval(struct file *file, char __user *user_buf, @@ -894,7 +904,8 @@ static const struct file_operations fops_regval = { .read = read_file_regval, .write = write_file_regval, .open = ath9k_debugfs_open, - .owner = THIS_MODULE + .owner = THIS_MODULE, + .llseek = default_llseek, }; int ath9k_init_debug(struct ath_hw *ah) diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h index 7f48df1e2903..0b09db0f8e7d 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom.h +++ b/drivers/net/wireless/ath/ath9k/eeprom.h @@ -62,7 +62,7 @@ #define SD_NO_CTL 0xE0 #define NO_CTL 0xff -#define CTL_MODE_M 7 +#define CTL_MODE_M 0xf #define CTL_11A 0 #define CTL_11B 1 #define CTL_11G 2 diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index 7d09b4b17bbd..bc2ca7d898e9 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -536,7 +536,8 @@ static ssize_t read_file_tgt_stats(struct file *file, char __user *user_buf, static const struct file_operations fops_tgt_stats = { .read = read_file_tgt_stats, .open = ath9k_debugfs_open, - .owner = THIS_MODULE + .owner = THIS_MODULE, + .llseek = default_llseek, }; static ssize_t read_file_xmit(struct file *file, char __user *user_buf, @@ -584,7 +585,8 @@ static ssize_t read_file_xmit(struct file *file, char __user *user_buf, static const struct file_operations fops_xmit = { .read = read_file_xmit, .open = ath9k_debugfs_open, - .owner = THIS_MODULE + .owner = THIS_MODULE, + .llseek = default_llseek, }; static ssize_t read_file_recv(struct file *file, char __user *user_buf, @@ -613,7 +615,8 @@ static ssize_t read_file_recv(struct file *file, char __user *user_buf, static const struct file_operations fops_recv = { .read = read_file_recv, .open = ath9k_debugfs_open, - .owner = THIS_MODULE + .owner = THIS_MODULE, + .llseek = default_llseek, }; int ath9k_htc_init_debug(struct ath_hw *ah) diff --git a/drivers/net/wireless/ath/regd.h b/drivers/net/wireless/ath/regd.h index a1c39526161a..345dd9721b41 100644 --- a/drivers/net/wireless/ath/regd.h +++ b/drivers/net/wireless/ath/regd.h @@ -31,7 +31,6 @@ enum ctl_group { #define NO_CTL 0xff #define SD_NO_CTL 0xE0 #define NO_CTL 0xff -#define CTL_MODE_M 7 #define CTL_11A 0 #define CTL_11B 1 #define CTL_11G 2 diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 3b632161c106..c96e19da2949 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -42,7 +42,6 @@ #include <linux/moduleparam.h> #include <linux/device.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -64,58 +63,21 @@ MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards"); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the atmel_cs - event handler. -*/ - static int atmel_config(struct pcmcia_device *link); static void atmel_release(struct pcmcia_device *link); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void atmel_detach(struct pcmcia_device *p_dev); typedef struct local_info_t { struct net_device *eth_dev; } local_info_t; -/*====================================================================== - - atmel_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - - ======================================================================*/ - static int atmel_probe(struct pcmcia_device *p_dev) { local_info_t *local; dev_dbg(&p_dev->dev, "atmel_attach()\n"); - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - p_dev->conf.Attributes = 0; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); if (!local) { @@ -127,15 +89,6 @@ static int atmel_probe(struct pcmcia_device *p_dev) return atmel_config(p_dev); } /* atmel_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - - ======================================================================*/ - static void atmel_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "atmel_detach\n"); @@ -145,14 +98,6 @@ static void atmel_detach(struct pcmcia_device *link) kfree(link->priv); } -/*====================================================================== - - atmel_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - - ======================================================================*/ - /* Call-back function to interrogate PCMCIA-specific information about the current existance of the card */ static int card_present(void *arg) @@ -165,47 +110,11 @@ static int card_present(void *arg) return 0; } -static int atmel_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int atmel_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev); } @@ -220,18 +129,9 @@ static int atmel_config(struct pcmcia_device *link) dev_dbg(&link->dev, "atmel_config\n"); - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; + if (pcmcia_loop_config(link, atmel_config_check, NULL)) goto failed; @@ -240,12 +140,7 @@ static int atmel_config(struct pcmcia_device *link) goto failed; } - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -267,14 +162,6 @@ static int atmel_config(struct pcmcia_device *link) return -ENODEV; } -/*====================================================================== - - After a card is removed, atmel_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - - ======================================================================*/ - static void atmel_release(struct pcmcia_device *link) { struct net_device *dev = ((local_info_t*)link->priv)->eth_dev; @@ -353,9 +240,7 @@ MODULE_DEVICE_TABLE(pcmcia, atmel_ids); static struct pcmcia_driver atmel_driver = { .owner = THIS_MODULE, - .drv = { - .name = "atmel_cs", - }, + .name = "atmel_cs", .probe = atmel_probe, .remove = atmel_detach, .id_table = atmel_ids, @@ -363,12 +248,12 @@ static struct pcmcia_driver atmel_driver = { .resume = atmel_resume, }; -static int atmel_cs_init(void) +static int __init atmel_cs_init(void) { return pcmcia_register_driver(&atmel_driver); } -static void atmel_cs_cleanup(void) +static void __exit atmel_cs_cleanup(void) { pcmcia_unregister_driver(&atmel_driver); } diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c index 80b19a44a407..59f59fa40334 100644 --- a/drivers/net/wireless/b43/debugfs.c +++ b/drivers/net/wireless/b43/debugfs.c @@ -627,6 +627,7 @@ out_unlock: .open = b43_debugfs_open, \ .read = b43_debugfs_read, \ .write = b43_debugfs_write, \ + .llseek = generic_file_llseek, \ }, \ .file_struct_offset = offsetof(struct b43_dfsentry, \ file_##name), \ diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index dfbc41d431ff..7dcba5fafdc7 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -26,7 +26,6 @@ #include <linux/ssb/ssb.h> #include <linux/slab.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -63,7 +62,6 @@ static int b43_pcmcia_resume(struct pcmcia_device *dev) static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) { struct ssb_bus *ssb; - win_req_t win; int err = -ENOMEM; int res = 0; @@ -73,30 +71,28 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) err = -ENODEV; - dev->conf.Attributes = CONF_ENABLE_IRQ; - dev->conf.IntType = INT_MEMORY_AND_IO; + dev->config_flags |= CONF_ENABLE_IRQ; - win.Attributes = WIN_ENABLE | WIN_DATA_WIDTH_16 | + dev->resource[2]->flags |= WIN_ENABLE | WIN_DATA_WIDTH_16 | WIN_USE_WAIT; - win.Base = 0; - win.Size = SSB_CORE_SIZE; - win.AccessSpeed = 250; - res = pcmcia_request_window(dev, &win, &dev->win); + dev->resource[2]->start = 0; + dev->resource[2]->end = SSB_CORE_SIZE; + res = pcmcia_request_window(dev, dev->resource[2], 250); if (res != 0) goto err_kfree_ssb; - res = pcmcia_map_mem_page(dev, dev->win, 0); + res = pcmcia_map_mem_page(dev, dev->resource[2], 0); if (res != 0) goto err_disable; if (!dev->irq) goto err_disable; - res = pcmcia_request_configuration(dev, &dev->conf); + res = pcmcia_enable_device(dev); if (res != 0) goto err_disable; - err = ssb_bus_pcmciabus_register(ssb, dev, win.Base); + err = ssb_bus_pcmciabus_register(ssb, dev, dev->resource[2]->start); if (err) goto err_disable; dev->priv = ssb; @@ -125,9 +121,7 @@ static void __devexit b43_pcmcia_remove(struct pcmcia_device *dev) static struct pcmcia_driver b43_pcmcia_driver = { .owner = THIS_MODULE, - .drv = { - .name = "b43-pcmcia", - }, + .name = "b43-pcmcia", .id_table = b43_pcmcia_tbl, .probe = b43_pcmcia_probe, .remove = __devexit_p(b43_pcmcia_remove), diff --git a/drivers/net/wireless/b43legacy/debugfs.c b/drivers/net/wireless/b43legacy/debugfs.c index 1f85ac569fec..f232618f2cd1 100644 --- a/drivers/net/wireless/b43legacy/debugfs.c +++ b/drivers/net/wireless/b43legacy/debugfs.c @@ -334,6 +334,7 @@ out_unlock: .open = b43legacy_debugfs_open, \ .read = b43legacy_debugfs_read, \ .write = b43legacy_debugfs_write, \ + .llseek = generic_file_llseek, \ }, \ .file_struct_offset = offsetof(struct b43legacy_dfsentry, \ file_##name), \ diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index ba54d1b04d22..bd8a4134edeb 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -12,7 +12,6 @@ #include <linux/wireless.h> #include <net/iw_handler.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -437,7 +436,6 @@ static int hostap_cs_probe(struct pcmcia_device *p_dev) int ret; PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info); - p_dev->conf.IntType = INT_MEMORY_AND_IO; ret = prism2_config(p_dev); if (ret) { @@ -468,74 +466,11 @@ static void prism2_detach(struct pcmcia_device *link) } -/* run after a CARD_INSERTION event is received to configure the PCMCIA - * socket and make the device available to the system */ - -static int prism2_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X " - "(default 0x%02X)\n", cfg->index, dflt->index); - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / - 10000 && !ignore_cis_vcc) { - PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping" - " this entry\n"); - return -ENODEV; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / - 10000 && !ignore_cis_vcc) { - PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch " - "- skipping this entry\n"); - return -ENODEV; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " - "dflt->io.nwin=%d\n", - cfg->io.nwin, dflt->io.nwin); - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev); } @@ -557,6 +492,10 @@ static int prism2_config(struct pcmcia_device *link) } /* Look for an appropriate configuration table entry in the CIS */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | + CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, prism2_config_check, NULL); if (ret) { if (!ignore_cis_vcc) @@ -588,12 +527,7 @@ static int prism2_config(struct pcmcia_device *link) if (ret) goto failed_unlock; - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed_unlock; @@ -602,20 +536,6 @@ static int prism2_config(struct pcmcia_device *link) spin_unlock_irqrestore(&local->irq_init_lock, flags); - /* Finally, report what we've done */ - printk(KERN_INFO "%s: index 0x%02x: ", - dev_info, link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp / 10, - link->conf.Vpp % 10); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - local->shutdown = 0; sandisk_enable_wireless(dev); @@ -627,7 +547,7 @@ static int prism2_config(struct pcmcia_device *link) return ret; failed_unlock: - spin_unlock_irqrestore(&local->irq_init_lock, flags); + spin_unlock_irqrestore(&local->irq_init_lock, flags); failed: kfree(hw_priv); prism2_release((u_long)link); @@ -779,9 +699,7 @@ MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids); static struct pcmcia_driver hostap_driver = { - .drv = { - .name = "hostap_cs", - }, + .name = "hostap_cs", .probe = hostap_cs_probe, .remove = prism2_detach, .owner = THIS_MODULE, diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 1189dbb6e2a6..996e9d7d7586 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -2723,14 +2723,6 @@ static void __ipw2100_rx_process(struct ipw2100_priv *priv) packet = &priv->rx_buffers[i]; - /* Sync the DMA for the STATUS buffer so CPU is sure to get - * the correct values */ - pci_dma_sync_single_for_cpu(priv->pci_dev, - sq->nic + - sizeof(struct ipw2100_status) * i, - sizeof(struct ipw2100_status), - PCI_DMA_FROMDEVICE); - /* Sync the DMA for the RX buffer so CPU is sure to get * the correct values */ pci_dma_sync_single_for_cpu(priv->pci_dev, packet->dma_addr, diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index fec026212326..0b779a41a142 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -265,7 +265,7 @@ struct iwl_cfg iwl1000_bgn_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 128, .ucode_tracing = true, .sensitivity_calib_by_driver = true, @@ -297,7 +297,7 @@ struct iwl_cfg iwl1000_bg_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 128, .ucode_tracing = true, .sensitivity_calib_by_driver = true, diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index 8e84a08ff951..293e1dbc166c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -873,6 +873,7 @@ static ssize_t iwl3945_sta_dbgfs_stats_table_read(struct file *file, static const struct file_operations rs_sta_dbgfs_stats_table_ops = { .read = iwl3945_sta_dbgfs_stats_table_read, .open = iwl3945_open_file_generic, + .llseek = default_llseek, }; static void iwl3945_add_debugfs(void *priv, void *priv_sta, diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 6950a783913b..8ccfcd08218d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -2731,7 +2731,7 @@ static struct iwl_cfg iwl3945_bg_cfg = { .led_compensation = 64, .broken_powersave = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 512, .tx_power_by_driver = true, }; @@ -2752,7 +2752,7 @@ static struct iwl_cfg iwl3945_abg_cfg = { .led_compensation = 64, .broken_powersave = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 512, .tx_power_by_driver = true, }; diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index d6da356608fa..d92b72909233 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2322,7 +2322,7 @@ struct iwl_cfg iwl4965_agn_cfg = { .led_compensation = 61, .chain_noise_num_beacons = IWL4965_CAL_NUM_BEACONS, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .temperature_kelvin = true, .max_event_log_size = 512, .tx_power_by_driver = true, diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index aacf3770f075..48bdcd8d2e94 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -510,7 +510,7 @@ struct iwl_cfg iwl5300_agn_cfg = { .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .ucode_tracing = true, .sensitivity_calib_by_driver = true, @@ -541,7 +541,7 @@ struct iwl_cfg iwl5100_bgn_cfg = { .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .ucode_tracing = true, .sensitivity_calib_by_driver = true, @@ -570,7 +570,7 @@ struct iwl_cfg iwl5100_abg_cfg = { .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .ucode_tracing = true, .sensitivity_calib_by_driver = true, @@ -601,7 +601,7 @@ struct iwl_cfg iwl5100_agn_cfg = { .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .ucode_tracing = true, .sensitivity_calib_by_driver = true, @@ -632,7 +632,7 @@ struct iwl_cfg iwl5350_agn_cfg = { .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .ucode_tracing = true, .sensitivity_calib_by_driver = true, @@ -663,7 +663,7 @@ struct iwl_cfg iwl5150_agn_cfg = { .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .ucode_tracing = true, .sensitivity_calib_by_driver = true, @@ -693,7 +693,7 @@ struct iwl_cfg iwl5150_abg_cfg = { .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .ucode_tracing = true, .sensitivity_calib_by_driver = true, diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index af4fd50f3405..cee06b968de8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -388,7 +388,7 @@ struct iwl_cfg iwl6000g2a_2agn_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 512, .ucode_tracing = true, .sensitivity_calib_by_driver = true, @@ -424,7 +424,7 @@ struct iwl_cfg iwl6000g2a_2abg_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 512, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, @@ -459,7 +459,7 @@ struct iwl_cfg iwl6000g2a_2bg_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 512, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, @@ -496,7 +496,7 @@ struct iwl_cfg iwl6000g2b_2agn_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, @@ -532,7 +532,7 @@ struct iwl_cfg iwl6000g2b_2abg_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, @@ -570,7 +570,7 @@ struct iwl_cfg iwl6000g2b_2bgn_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, @@ -606,7 +606,7 @@ struct iwl_cfg iwl6000g2b_2bg_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, @@ -644,7 +644,7 @@ struct iwl_cfg iwl6000g2b_bgn_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, @@ -680,7 +680,7 @@ struct iwl_cfg iwl6000g2b_bg_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_LONG_MONITORING_PERIOD, .max_event_log_size = 512, .sensitivity_calib_by_driver = true, .chain_noise_calib_by_driver = true, @@ -721,7 +721,7 @@ struct iwl_cfg iwl6000i_2agn_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 1024, .ucode_tracing = true, .sensitivity_calib_by_driver = true, @@ -756,7 +756,7 @@ struct iwl_cfg iwl6000i_2abg_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 1024, .ucode_tracing = true, .sensitivity_calib_by_driver = true, @@ -791,7 +791,7 @@ struct iwl_cfg iwl6000i_2bg_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 1024, .ucode_tracing = true, .sensitivity_calib_by_driver = true, @@ -828,7 +828,7 @@ struct iwl_cfg iwl6050_2agn_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1500, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 1024, .ucode_tracing = true, .sensitivity_calib_by_driver = true, @@ -866,7 +866,7 @@ struct iwl_cfg iwl6050g2_bgn_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1500, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 1024, .ucode_tracing = true, .sensitivity_calib_by_driver = true, @@ -902,7 +902,7 @@ struct iwl_cfg iwl6050_2abg_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1500, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 1024, .ucode_tracing = true, .sensitivity_calib_by_driver = true, @@ -940,7 +940,7 @@ struct iwl_cfg iwl6000_3agn_cfg = { .support_ct_kill_exit = true, .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, .chain_noise_scale = 1000, - .monitor_recover_period = IWL_MONITORING_PERIOD, + .monitor_recover_period = IWL_DEF_MONITORING_PERIOD, .max_event_log_size = 1024, .ucode_tracing = true, .sensitivity_calib_by_driver = true, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c index 9dd9e64c2b0b..8fd00a6e5120 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c @@ -1411,7 +1411,7 @@ void iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) clear_bit(STATUS_SCAN_HW, &priv->status); clear_bit(STATUS_SCANNING, &priv->status); /* inform mac80211 scan aborted */ - queue_work(priv->workqueue, &priv->scan_completed); + queue_work(priv->workqueue, &priv->abort_scan); } int iwlagn_manage_ibss_station(struct iwl_priv *priv, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 23e5c42e7d7e..a4378ba31ef6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -2873,6 +2873,7 @@ static const struct file_operations rs_sta_dbgfs_scale_table_ops = { .write = rs_sta_dbgfs_scale_table_write, .read = rs_sta_dbgfs_scale_table_read, .open = open_file_generic, + .llseek = default_llseek, }; static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) @@ -2915,6 +2916,7 @@ static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, static const struct file_operations rs_sta_dbgfs_stats_table_ops = { .read = rs_sta_dbgfs_stats_table_read, .open = open_file_generic, + .llseek = default_llseek, }; static ssize_t rs_sta_dbgfs_rate_scale_data_read(struct file *file, @@ -2946,6 +2948,7 @@ static ssize_t rs_sta_dbgfs_rate_scale_data_read(struct file *file, static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = { .read = rs_sta_dbgfs_rate_scale_data_read, .open = open_file_generic, + .llseek = default_llseek, }; static void rs_add_debugfs(void *priv, void *priv_sta, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index c1882fd8345d..10d7b9b7f064 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3667,6 +3667,49 @@ out_exit: IWL_DEBUG_MAC80211(priv, "leave\n"); } +static void iwlagn_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + u64 multicast) +{ + struct iwl_priv *priv = hw->priv; + __le32 filter_or = 0, filter_nand = 0; + +#define CHK(test, flag) do { \ + if (*total_flags & (test)) \ + filter_or |= (flag); \ + else \ + filter_nand |= (flag); \ + } while (0) + + IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n", + changed_flags, *total_flags); + + CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK); + CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK); + CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); + +#undef CHK + + mutex_lock(&priv->mutex); + + priv->staging_rxon.filter_flags &= ~filter_nand; + priv->staging_rxon.filter_flags |= filter_or; + + iwlcore_commit_rxon(priv); + + mutex_unlock(&priv->mutex); + + /* + * Receiving all multicast frames is always enabled by the + * default flags setup in iwl_connection_init_rx_config() + * since we currently do not support programming multicast + * filters into the device. + */ + *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | + FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; +} + static void iwl_mac_flush(struct ieee80211_hw *hw, bool drop) { struct iwl_priv *priv = hw->priv; @@ -3867,7 +3910,7 @@ static struct ieee80211_ops iwl_hw_ops = { .add_interface = iwl_mac_add_interface, .remove_interface = iwl_mac_remove_interface, .config = iwl_mac_config, - .configure_filter = iwl_configure_filter, + .configure_filter = iwlagn_configure_filter, .set_key = iwl_mac_set_key, .update_tkip_key = iwl_mac_update_tkip_key, .conf_tx = iwl_mac_conf_tx, diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 2c03c6e20a72..e23c4060a0f0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1328,51 +1328,6 @@ out: EXPORT_SYMBOL(iwl_apm_init); - -void iwl_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - u64 multicast) -{ - struct iwl_priv *priv = hw->priv; - __le32 filter_or = 0, filter_nand = 0; - -#define CHK(test, flag) do { \ - if (*total_flags & (test)) \ - filter_or |= (flag); \ - else \ - filter_nand |= (flag); \ - } while (0) - - IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n", - changed_flags, *total_flags); - - CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK); - CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK); - CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); - -#undef CHK - - mutex_lock(&priv->mutex); - - priv->staging_rxon.filter_flags &= ~filter_nand; - priv->staging_rxon.filter_flags |= filter_or; - - iwlcore_commit_rxon(priv); - - mutex_unlock(&priv->mutex); - - /* - * Receiving all multicast frames is always enabled by the - * default flags setup in iwl_connection_init_rx_config() - * since we currently do not support programming multicast - * filters into the device. - */ - *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | - FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; -} -EXPORT_SYMBOL(iwl_configure_filter); - int iwl_set_hw_params(struct iwl_priv *priv) { priv->hw_params.max_rxq_size = RX_QUEUE_SIZE; @@ -2658,6 +2613,11 @@ int iwl_force_reset(struct iwl_priv *priv, int mode, bool external) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return -EINVAL; + if (test_bit(STATUS_SCANNING, &priv->status)) { + IWL_DEBUG_INFO(priv, "scan in progress.\n"); + return -EINVAL; + } + if (mode >= IWL_MAX_FORCE_RESET) { IWL_DEBUG_INFO(priv, "invalid reset request.\n"); return -EINVAL; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 4a71dfb10a15..5e6ee3da6bbf 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -372,9 +372,6 @@ int iwl_set_decrypted_flag(struct iwl_priv *priv, u32 decrypt_res, struct ieee80211_rx_status *stats); void iwl_irq_handle_error(struct iwl_priv *priv); -void iwl_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, u64 multicast); int iwl_set_hw_params(struct iwl_priv *priv); void iwl_post_associate(struct iwl_priv *priv, struct ieee80211_vif *vif); void iwl_bss_info_changed(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c index e96a1bb12783..a32d5d337649 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c +++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c @@ -87,6 +87,7 @@ static int iwl_dbgfs_open_file_generic(struct inode *inode, struct file *file) static const struct file_operations iwl_dbgfs_##name##_ops = { \ .read = iwl_dbgfs_##name##_read, \ .open = iwl_dbgfs_open_file_generic, \ + .llseek = generic_file_llseek, \ }; #define DEBUGFS_WRITE_FILE_OPS(name) \ @@ -94,6 +95,7 @@ static const struct file_operations iwl_dbgfs_##name##_ops = { \ static const struct file_operations iwl_dbgfs_##name##_ops = { \ .write = iwl_dbgfs_##name##_write, \ .open = iwl_dbgfs_open_file_generic, \ + .llseek = generic_file_llseek, \ }; @@ -104,6 +106,7 @@ static const struct file_operations iwl_dbgfs_##name##_ops = { \ .write = iwl_dbgfs_##name##_write, \ .read = iwl_dbgfs_##name##_read, \ .open = iwl_dbgfs_open_file_generic, \ + .llseek = generic_file_llseek, \ }; static ssize_t iwl_dbgfs_tx_statistics_read(struct file *file, diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index f35bcad56e36..2e97cd2fa98a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -1049,7 +1049,8 @@ struct iwl_event_log { #define IWL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5) /* timer constants use to monitor and recover stuck tx queues in mSecs */ -#define IWL_MONITORING_PERIOD (1000) +#define IWL_DEF_MONITORING_PERIOD (1000) +#define IWL_LONG_MONITORING_PERIOD (5000) #define IWL_ONE_HUNDRED_MSECS (100) #define IWL_SIXTY_SECS (60000) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 70c4b8fba0ee..d31661c1ce77 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -3018,7 +3018,7 @@ void iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) clear_bit(STATUS_SCANNING, &priv->status); /* inform mac80211 scan aborted */ - queue_work(priv->workqueue, &priv->scan_completed); + queue_work(priv->workqueue, &priv->abort_scan); } static void iwl3945_bg_restart(struct work_struct *data) @@ -3391,6 +3391,55 @@ static int iwl3945_mac_sta_add(struct ieee80211_hw *hw, return 0; } + +static void iwl3945_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + u64 multicast) +{ + struct iwl_priv *priv = hw->priv; + __le32 filter_or = 0, filter_nand = 0; + +#define CHK(test, flag) do { \ + if (*total_flags & (test)) \ + filter_or |= (flag); \ + else \ + filter_nand |= (flag); \ + } while (0) + + IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n", + changed_flags, *total_flags); + + CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK); + CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK); + CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); + +#undef CHK + + mutex_lock(&priv->mutex); + + priv->staging_rxon.filter_flags &= ~filter_nand; + priv->staging_rxon.filter_flags |= filter_or; + + /* + * Committing directly here breaks for some reason, + * but we'll eventually commit the filter flags + * change anyway. + */ + + mutex_unlock(&priv->mutex); + + /* + * Receiving all multicast frames is always enabled by the + * default flags setup in iwl_connection_init_rx_config() + * since we currently do not support programming multicast + * filters into the device. + */ + *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | + FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; +} + + /***************************************************************************** * * sysfs attributes @@ -3796,7 +3845,7 @@ static struct ieee80211_ops iwl3945_hw_ops = { .add_interface = iwl_mac_add_interface, .remove_interface = iwl_mac_remove_interface, .config = iwl_mac_config, - .configure_filter = iwl_configure_filter, + .configure_filter = iwl3945_configure_filter, .set_key = iwl3945_mac_set_key, .conf_tx = iwl_mac_conf_tx, .reset_tsf = iwl_mac_reset_tsf, diff --git a/drivers/net/wireless/iwmc3200wifi/debugfs.c b/drivers/net/wireless/iwmc3200wifi/debugfs.c index 53b0b7711f02..0a0cc9667cd6 100644 --- a/drivers/net/wireless/iwmc3200wifi/debugfs.c +++ b/drivers/net/wireless/iwmc3200wifi/debugfs.c @@ -402,24 +402,28 @@ static const struct file_operations iwm_debugfs_txq_fops = { .owner = THIS_MODULE, .open = iwm_generic_open, .read = iwm_debugfs_txq_read, + .llseek = default_llseek, }; static const struct file_operations iwm_debugfs_tx_credit_fops = { .owner = THIS_MODULE, .open = iwm_generic_open, .read = iwm_debugfs_tx_credit_read, + .llseek = default_llseek, }; static const struct file_operations iwm_debugfs_rx_ticket_fops = { .owner = THIS_MODULE, .open = iwm_generic_open, .read = iwm_debugfs_rx_ticket_read, + .llseek = default_llseek, }; static const struct file_operations iwm_debugfs_fw_err_fops = { .owner = THIS_MODULE, .open = iwm_generic_open, .read = iwm_debugfs_fw_err_read, + .llseek = default_llseek, }; void iwm_debugfs_init(struct iwm_priv *iwm) diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.c b/drivers/net/wireless/iwmc3200wifi/sdio.c index edcb52330cf5..56383e7be835 100644 --- a/drivers/net/wireless/iwmc3200wifi/sdio.c +++ b/drivers/net/wireless/iwmc3200wifi/sdio.c @@ -364,6 +364,7 @@ static const struct file_operations iwm_debugfs_sdio_fops = { .owner = THIS_MODULE, .open = iwm_debugfs_sdio_open, .read = iwm_debugfs_sdio_read, + .llseek = default_llseek, }; static void if_sdio_debugfs_init(struct iwm_priv *iwm, struct dentry *parent_dir) diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c index 651a79c8de8a..fbf3b0332bb7 100644 --- a/drivers/net/wireless/libertas/debugfs.c +++ b/drivers/net/wireless/libertas/debugfs.c @@ -696,6 +696,7 @@ out_unlock: .open = open_file_generic, \ .read = (fread), \ .write = (fwrite), \ + .llseek = generic_file_llseek, \ } struct lbs_debugfs_files { @@ -961,6 +962,7 @@ static const struct file_operations lbs_debug_fops = { .open = open_file_generic, .write = lbs_debugfs_write, .read = lbs_debugfs_read, + .llseek = default_llseek, }; /** diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 9c298396be50..ff1280f41336 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -28,7 +28,6 @@ #include <linux/firmware.h> #include <linux/netdevice.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -761,15 +760,6 @@ static int if_cs_host_to_card(struct lbs_private *priv, } -/********************************************************************/ -/* Card Services */ -/********************************************************************/ - -/* - * After a card is removed, if_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void if_cs_release(struct pcmcia_device *p_dev) { struct if_cs_card *card = p_dev->priv; @@ -785,31 +775,12 @@ static void if_cs_release(struct pcmcia_device *p_dev) } -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. - */ - -static int if_cs_ioprobe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int if_cs_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - /* IO window settings */ - if (cfg->io.nwin != 1) { + if (p_dev->resource[1]->end) { lbs_pr_err("wrong CIS (check number of IO windows)\n"); return -ENODEV; } @@ -835,15 +806,13 @@ static int if_cs_probe(struct pcmcia_device *p_dev) card->p_dev = p_dev; p_dev->priv = card; - p_dev->conf.Attributes = 0; - p_dev->conf.IntType = INT_MEMORY_AND_IO; + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) { lbs_pr_err("error in pcmcia_loop_config\n"); goto out1; } - /* * Allocate an interrupt line. Note that this does not assign * a handler to the interrupt, unless the 'Handler' member of @@ -861,14 +830,9 @@ static int if_cs_probe(struct pcmcia_device *p_dev) goto out1; } - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(p_dev, &p_dev->conf); + ret = pcmcia_enable_device(p_dev); if (ret) { - lbs_pr_err("error in pcmcia_request_configuration\n"); + lbs_pr_err("error in pcmcia_enable_device\n"); goto out2; } @@ -962,12 +926,6 @@ out: } -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void if_cs_detach(struct pcmcia_device *p_dev) { struct if_cs_card *card = p_dev->priv; @@ -1000,9 +958,7 @@ MODULE_DEVICE_TABLE(pcmcia, if_cs_ids); static struct pcmcia_driver lbs_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRV_NAME, - }, + .name = DRV_NAME, .probe = if_cs_probe, .remove = if_cs_detach, .id_table = if_cs_ids, diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index ba854c70ab94..87b634978b35 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -128,7 +128,7 @@ struct if_sdio_card { bool helper_allocated; bool firmware_allocated; - u8 buffer[65536]; + u8 buffer[65536] __attribute__((aligned(4))); spinlock_t lock; struct if_sdio_packet *packets; diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 01ad7f77383a..86fa8abdd66f 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -486,7 +486,7 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, struct ieee80211_rx_status rx_status; if (data->idle) { - wiphy_debug(hw->wiphy, "trying to tx when idle - reject\n"); + wiphy_debug(hw->wiphy, "Trying to TX when idle - reject\n"); return false; } diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index d761ed2d8af4..f152a25be59f 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -910,14 +910,14 @@ static int mwl8k_rxq_init(struct ieee80211_hw *hw, int index) rxq->rxd = pci_alloc_consistent(priv->pdev, size, &rxq->rxd_dma); if (rxq->rxd == NULL) { - wiphy_err(hw->wiphy, "failed to alloc rx descriptors\n"); + wiphy_err(hw->wiphy, "failed to alloc RX descriptors\n"); return -ENOMEM; } memset(rxq->rxd, 0, size); rxq->buf = kmalloc(MWL8K_RX_DESCS * sizeof(*rxq->buf), GFP_KERNEL); if (rxq->buf == NULL) { - wiphy_err(hw->wiphy, "failed to alloc rx skbuff list\n"); + wiphy_err(hw->wiphy, "failed to alloc RX skbuff list\n"); pci_free_consistent(priv->pdev, size, rxq->rxd, rxq->rxd_dma); return -ENOMEM; } @@ -1145,14 +1145,14 @@ static int mwl8k_txq_init(struct ieee80211_hw *hw, int index) txq->txd = pci_alloc_consistent(priv->pdev, size, &txq->txd_dma); if (txq->txd == NULL) { - wiphy_err(hw->wiphy, "failed to alloc tx descriptors\n"); + wiphy_err(hw->wiphy, "failed to alloc TX descriptors\n"); return -ENOMEM; } memset(txq->txd, 0, size); txq->skb = kmalloc(MWL8K_TX_DESCS * sizeof(*txq->skb), GFP_KERNEL); if (txq->skb == NULL) { - wiphy_err(hw->wiphy, "failed to alloc tx skbuff list\n"); + wiphy_err(hw->wiphy, "failed to alloc TX skbuff list\n"); pci_free_consistent(priv->pdev, size, txq->txd, txq->txd_dma); return -ENOMEM; } @@ -1573,7 +1573,7 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd) PCI_DMA_BIDIRECTIONAL); if (!timeout) { - wiphy_err(hw->wiphy, "command %s timeout after %u ms\n", + wiphy_err(hw->wiphy, "Command %s timeout after %u ms\n", mwl8k_cmd_name(cmd->code, buf, sizeof(buf)), MWL8K_CMD_TIMEOUT_MS); rc = -ETIMEDOUT; @@ -1584,11 +1584,11 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd) rc = cmd->result ? -EINVAL : 0; if (rc) - wiphy_err(hw->wiphy, "command %s error 0x%x\n", + wiphy_err(hw->wiphy, "Command %s error 0x%x\n", mwl8k_cmd_name(cmd->code, buf, sizeof(buf)), le16_to_cpu(cmd->result)); else if (ms > 2000) - wiphy_notice(hw->wiphy, "command %s took %d ms\n", + wiphy_notice(hw->wiphy, "Command %s took %d ms\n", mwl8k_cmd_name(cmd->code, buf, sizeof(buf)), ms); @@ -3210,7 +3210,7 @@ static int mwl8k_start(struct ieee80211_hw *hw) rc = request_irq(priv->pdev->irq, mwl8k_interrupt, IRQF_SHARED, MWL8K_NAME, hw); if (rc) { - wiphy_err(hw->wiphy, "failed to register irq handler\n"); + wiphy_err(hw->wiphy, "failed to register IRQ handler\n"); return -EIO; } @@ -3926,7 +3926,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, priv->sram = pci_iomap(pdev, 0, 0x10000); if (priv->sram == NULL) { - wiphy_err(hw->wiphy, "cannot map device sram\n"); + wiphy_err(hw->wiphy, "Cannot map device SRAM\n"); goto err_iounmap; } @@ -3938,7 +3938,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, if (priv->regs == NULL) { priv->regs = pci_iomap(pdev, 2, 0x10000); if (priv->regs == NULL) { - wiphy_err(hw->wiphy, "cannot map device registers\n"); + wiphy_err(hw->wiphy, "Cannot map device registers\n"); goto err_iounmap; } } @@ -3950,14 +3950,14 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, /* Ask userland hotplug daemon for the device firmware */ rc = mwl8k_request_firmware(priv); if (rc) { - wiphy_err(hw->wiphy, "firmware files not found\n"); + wiphy_err(hw->wiphy, "Firmware files not found\n"); goto err_stop_firmware; } /* Load firmware into hardware */ rc = mwl8k_load_firmware(hw); if (rc) { - wiphy_err(hw->wiphy, "cannot start firmware\n"); + wiphy_err(hw->wiphy, "Cannot start firmware\n"); goto err_stop_firmware; } @@ -4047,7 +4047,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, rc = request_irq(priv->pdev->irq, mwl8k_interrupt, IRQF_SHARED, MWL8K_NAME, hw); if (rc) { - wiphy_err(hw->wiphy, "failed to register irq handler\n"); + wiphy_err(hw->wiphy, "failed to register IRQ handler\n"); goto err_free_queues; } @@ -4067,7 +4067,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, rc = mwl8k_cmd_get_hw_spec_sta(hw); } if (rc) { - wiphy_err(hw->wiphy, "cannot initialise firmware\n"); + wiphy_err(hw->wiphy, "Cannot initialise firmware\n"); goto err_free_irq; } @@ -4081,14 +4081,14 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, /* Turn radio off */ rc = mwl8k_cmd_radio_disable(hw); if (rc) { - wiphy_err(hw->wiphy, "cannot disable\n"); + wiphy_err(hw->wiphy, "Cannot disable\n"); goto err_free_irq; } /* Clear MAC address */ rc = mwl8k_cmd_set_mac_addr(hw, NULL, "\x00\x00\x00\x00\x00\x00"); if (rc) { - wiphy_err(hw->wiphy, "cannot clear mac address\n"); + wiphy_err(hw->wiphy, "Cannot clear MAC address\n"); goto err_free_irq; } @@ -4098,7 +4098,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, rc = ieee80211_register_hw(hw); if (rc) { - wiphy_err(hw->wiphy, "cannot register device\n"); + wiphy_err(hw->wiphy, "Cannot register device\n"); goto err_free_queues; } diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index ef46a2d88539..71b3d68b9403 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -93,14 +92,6 @@ orinoco_cs_hard_reset(struct orinoco_private *priv) /* PCMCIA stuff */ /********************************************************************/ -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ static int orinoco_cs_probe(struct pcmcia_device *link) { @@ -117,23 +108,9 @@ orinoco_cs_probe(struct pcmcia_device *link) card->p_dev = link; link->priv = priv; - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - return orinoco_cs_config(link); } /* orinoco_cs_attach */ -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void orinoco_cs_detach(struct pcmcia_device *link) { struct orinoco_private *priv = link->priv; @@ -145,76 +122,12 @@ static void orinoco_cs_detach(struct pcmcia_device *link) free_orinocodev(priv); } /* orinoco_cs_detach */ -/* - * orinoco_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - -static int orinoco_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - goto next_entry; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - goto next_entry; - } - return 0; - -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; + return pcmcia_request_io(p_dev); }; static int @@ -225,20 +138,10 @@ orinoco_cs_config(struct pcmcia_device *link) int ret; void __iomem *mem; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); if (ret) { if (!ignore_cis_vcc) @@ -262,12 +165,7 @@ orinoco_cs_config(struct pcmcia_device *link) hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -291,11 +189,6 @@ orinoco_cs_config(struct pcmcia_device *link) return -ENODEV; } /* orinoco_cs_config */ -/* - * After a card is removed, orinoco_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void orinoco_cs_release(struct pcmcia_device *link) { @@ -344,12 +237,6 @@ static int orinoco_cs_resume(struct pcmcia_device *link) /* Module initialization */ /********************************************************************/ -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (David Gibson <[email protected]>, " - "Pavel Roskin <[email protected]>, et al)"; - static struct pcmcia_device_id orinoco_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */ PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */ @@ -441,9 +328,7 @@ MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids); static struct pcmcia_driver orinoco_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = orinoco_cs_probe, .remove = orinoco_cs_detach, .id_table = orinoco_cs_ids, @@ -454,8 +339,6 @@ static struct pcmcia_driver orinoco_driver = { static int __init init_orinoco_cs(void) { - printk(KERN_DEBUG "%s\n", version); - return pcmcia_register_driver(&orinoco_driver); } diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 873877e17e1b..fb859a5ad2eb 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -25,7 +25,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -154,14 +153,6 @@ spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle) /* PCMCIA stuff */ /********************************************************************/ -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ static int spectrum_cs_probe(struct pcmcia_device *link) { @@ -179,23 +170,9 @@ spectrum_cs_probe(struct pcmcia_device *link) card->p_dev = link; link->priv = priv; - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - return spectrum_cs_config(link); } /* spectrum_cs_attach */ -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void spectrum_cs_detach(struct pcmcia_device *link) { struct orinoco_private *priv = link->priv; @@ -207,76 +184,13 @@ static void spectrum_cs_detach(struct pcmcia_device *link) free_orinocodev(priv); } /* spectrum_cs_detach */ -/* - * spectrum_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - static int spectrum_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - goto next_entry; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - goto next_entry; - } - return 0; - -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; + return pcmcia_request_io(p_dev); }; static int @@ -287,20 +201,10 @@ spectrum_cs_config(struct pcmcia_device *link) int ret; void __iomem *mem; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); if (ret) { if (!ignore_cis_vcc) @@ -325,12 +229,7 @@ spectrum_cs_config(struct pcmcia_device *link) hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); hw->eeprom_pda = true; - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -358,11 +257,6 @@ spectrum_cs_config(struct pcmcia_device *link) return -ENODEV; } /* spectrum_cs_config */ -/* - * After a card is removed, spectrum_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void spectrum_cs_release(struct pcmcia_device *link) { @@ -407,12 +301,6 @@ spectrum_cs_resume(struct pcmcia_device *link) /* Module initialization */ /********************************************************************/ -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Pavel Roskin <[email protected]>," - " David Gibson <[email protected]>, et al)"; - static struct pcmcia_device_id spectrum_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */ PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */ @@ -423,9 +311,7 @@ MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids); static struct pcmcia_driver orinoco_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = spectrum_cs_probe, .remove = spectrum_cs_detach, .suspend = spectrum_cs_suspend, @@ -436,8 +322,6 @@ static struct pcmcia_driver orinoco_driver = { static int __init init_spectrum_cs(void) { - printk(KERN_DEBUG "%s\n", version); - return pcmcia_register_driver(&orinoco_driver); } diff --git a/drivers/net/wireless/p54/eeprom.c b/drivers/net/wireless/p54/eeprom.c index d687cb7f2a59..78347041ec40 100644 --- a/drivers/net/wireless/p54/eeprom.c +++ b/drivers/net/wireless/p54/eeprom.c @@ -167,7 +167,7 @@ static int p54_generate_band(struct ieee80211_hw *dev, } if (j == 0) { - wiphy_err(dev->wiphy, "disabling totally damaged %d GHz band\n", + wiphy_err(dev->wiphy, "Disabling totally damaged %d GHz band\n", (band == IEEE80211_BAND_2GHZ) ? 2 : 5); ret = -ENODATA; @@ -695,12 +695,12 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) u8 perm_addr[ETH_ALEN]; wiphy_warn(dev->wiphy, - "invalid hwaddr! using randomly generated mac addr\n"); + "Invalid hwaddr! Using randomly generated MAC addr\n"); random_ether_addr(perm_addr); SET_IEEE80211_PERM_ADDR(dev, perm_addr); } - wiphy_info(dev->wiphy, "hwaddr %pm, mac:isl38%02x rf:%s\n", + wiphy_info(dev->wiphy, "hwaddr %pM, MAC:isl38%02x RF:%s\n", dev->wiphy->perm_addr, priv->version, p54_rf_chips[priv->rxhw]); diff --git a/drivers/net/wireless/p54/fwio.c b/drivers/net/wireless/p54/fwio.c index 47006bca4852..15b20c29a604 100644 --- a/drivers/net/wireless/p54/fwio.c +++ b/drivers/net/wireless/p54/fwio.c @@ -125,7 +125,7 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) if (fw_version) wiphy_info(priv->hw->wiphy, - "fw rev %s - softmac protocol %x.%x\n", + "FW rev %s - Softmac protocol %x.%x\n", fw_version, priv->fw_var >> 8, priv->fw_var & 0xff); if (priv->fw_var < 0x500) diff --git a/drivers/net/wireless/p54/led.c b/drivers/net/wireless/p54/led.c index ea91f5cce6b3..3837e1eec5f4 100644 --- a/drivers/net/wireless/p54/led.c +++ b/drivers/net/wireless/p54/led.c @@ -58,7 +58,7 @@ static void p54_update_leds(struct work_struct *work) err = p54_set_leds(priv); if (err && net_ratelimit()) wiphy_err(priv->hw->wiphy, - "failed to update leds (%d).\n", err); + "failed to update LEDs (%d).\n", err); if (rerun) ieee80211_queue_delayed_work(priv->hw, &priv->led_work, @@ -103,7 +103,7 @@ static int p54_register_led(struct p54_common *priv, err = led_classdev_register(wiphy_dev(priv->hw->wiphy), &led->led_dev); if (err) wiphy_err(priv->hw->wiphy, - "failed to register %s led.\n", name); + "Failed to register %s LED.\n", name); else led->registered = 1; diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 822f8dc26e9c..1eacba4daa5b 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -466,7 +466,7 @@ static int p54p_open(struct ieee80211_hw *dev) P54P_READ(dev_int); if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) { - wiphy_err(dev->wiphy, "cannot boot firmware!\n"); + wiphy_err(dev->wiphy, "Cannot boot firmware!\n"); p54p_stop(dev); return -ETIMEDOUT; } diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c index 427b46f558ed..0e937dc0c9c4 100644 --- a/drivers/net/wireless/p54/txrx.c +++ b/drivers/net/wireless/p54/txrx.c @@ -446,7 +446,7 @@ static void p54_rx_frame_sent(struct p54_common *priv, struct sk_buff *skb) } if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && - (!payload->status)) + !(payload->status & P54_TX_FAILED)) info->flags |= IEEE80211_TX_STAT_ACK; if (payload->status & P54_TX_PSM_CANCELLED) info->flags |= IEEE80211_TX_STAT_TX_FILTERED; @@ -540,7 +540,7 @@ static void p54_rx_trap(struct p54_common *priv, struct sk_buff *skb) case P54_TRAP_BEACON_TX: break; case P54_TRAP_RADAR: - wiphy_info(priv->hw->wiphy, "radar (freq:%d mhz)\n", freq); + wiphy_info(priv->hw->wiphy, "radar (freq:%d MHz)\n", freq); break; case P54_TRAP_NO_BEACON: if (priv->vif) diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 88560d0ae50a..46da03753fd5 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -46,7 +46,6 @@ #include <linux/ethtool.h> #include <linux/ieee80211.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -169,13 +168,6 @@ static int bc; */ static char *phy_addr = NULL; - -/* A struct pcmcia_device structure has fields for most things that are needed - to keep track of a socket, but there will usually be some device - specific information that also needs to be kept track of. The - 'priv' pointer in a struct pcmcia_device structure can be used to point to - a device-specific private data structure, like this. -*/ static unsigned int ray_mem_speed = 500; /* WARNING: THIS DRIVER IS NOT CAPABLE OF HANDLING MULTIPLE DEVICES! */ @@ -290,14 +282,6 @@ static const struct net_device_ops ray_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*============================================================================= - ray_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. -=============================================================================*/ static int ray_probe(struct pcmcia_device *p_dev) { ray_dev_t *local; @@ -318,9 +302,8 @@ static int ray_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - p_dev->conf.ConfigIndex = 1; + p_dev->config_flags |= CONF_ENABLE_IRQ; + p_dev->config_index = 1; p_dev->priv = dev; @@ -353,12 +336,6 @@ fail_alloc_dev: return -ENOMEM; } /* ray_attach */ -/*============================================================================= - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. -=============================================================================*/ static void ray_detach(struct pcmcia_device *link) { struct net_device *dev; @@ -381,17 +358,11 @@ static void ray_detach(struct pcmcia_device *link) dev_dbg(&link->dev, "ray_cs ray_detach ending\n"); } /* ray_detach */ -/*============================================================================= - ray_config() is run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. -=============================================================================*/ #define MAX_TUPLE_SIZE 128 static int ray_config(struct pcmcia_device *link) { int ret = 0; int i; - win_req_t req; struct net_device *dev = (struct net_device *)link->priv; ray_dev_t *local = netdev_priv(dev); @@ -412,54 +383,50 @@ static int ray_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - /* This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; /*** Set up 32k window for shared memory (transmit and control) ************/ - req.Attributes = - WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x8000; - req.AccessSpeed = ray_mem_speed; - ret = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; + link->resource[2]->start = 0; + link->resource[2]->end = 0x8000; + ret = pcmcia_request_window(link, link->resource[2], ray_mem_speed); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, link->win, 0); + ret = pcmcia_map_mem_page(link, link->resource[2], 0); if (ret) goto failed; - local->sram = ioremap(req.Base, req.Size); + local->sram = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); /*** Set up 16k window for shared memory (receive buffer) ***************/ - req.Attributes = + link->resource[3]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x4000; - req.AccessSpeed = ray_mem_speed; - ret = pcmcia_request_window(link, &req, &local->rmem_handle); + link->resource[3]->start = 0; + link->resource[3]->end = 0x4000; + ret = pcmcia_request_window(link, link->resource[3], ray_mem_speed); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, local->rmem_handle, 0x8000); + ret = pcmcia_map_mem_page(link, link->resource[3], 0x8000); if (ret) goto failed; - local->rmem = ioremap(req.Base, req.Size); + local->rmem = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); /*** Set up window for attribute memory ***********************************/ - req.Attributes = + link->resource[4]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | WIN_ENABLE | WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x1000; - req.AccessSpeed = ray_mem_speed; - ret = pcmcia_request_window(link, &req, &local->amem_handle); + link->resource[4]->start = 0; + link->resource[4]->end = 0x1000; + ret = pcmcia_request_window(link, link->resource[4], ray_mem_speed); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, local->amem_handle, 0); + ret = pcmcia_map_mem_page(link, link->resource[4], 0); if (ret) goto failed; - local->amem = ioremap(req.Base, req.Size); + local->amem = ioremap(link->resource[4]->start, + resource_size(link->resource[4])); dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram); dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem); @@ -775,11 +742,7 @@ static void join_net(u_long data) local->card_status = CARD_DOING_ACQ; } -/*============================================================================ - After a card is removed, ray_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. -=============================================================================*/ + static void ray_release(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -2802,6 +2765,7 @@ static ssize_t ray_cs_essid_proc_write(struct file *file, static const struct file_operations ray_cs_essid_proc_fops = { .owner = THIS_MODULE, .write = ray_cs_essid_proc_write, + .llseek = noop_llseek, }; static ssize_t int_proc_write(struct file *file, const char __user *buffer, @@ -2835,6 +2799,7 @@ static ssize_t int_proc_write(struct file *file, const char __user *buffer, static const struct file_operations int_proc_fops = { .owner = THIS_MODULE, .write = int_proc_write, + .llseek = noop_llseek, }; #endif @@ -2847,9 +2812,7 @@ MODULE_DEVICE_TABLE(pcmcia, ray_ids); static struct pcmcia_driver ray_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ray_cs", - }, + .name = "ray_cs", .probe = ray_probe, .remove = ray_detach, .id_table = ray_ids, diff --git a/drivers/net/wireless/ray_cs.h b/drivers/net/wireless/ray_cs.h index 9f01ddb19748..e79848fbcca1 100644 --- a/drivers/net/wireless/ray_cs.h +++ b/drivers/net/wireless/ray_cs.h @@ -25,8 +25,6 @@ struct beacon_rx { typedef struct ray_dev_t { int card_status; int authentication_state; - window_handle_t amem_handle; /* handle to window for attribute memory */ - window_handle_t rmem_handle; /* handle to window for rx buffer on card */ void __iomem *sram; /* pointer to beginning of shared RAM */ void __iomem *amem; /* pointer to attribute mem window */ void __iomem *rmem; /* pointer to receive buffer window */ diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index b0498e7e7aae..cea81e4c5c82 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -315,6 +315,7 @@ static const struct file_operations rt2x00debug_fop_queue_dump = { .poll = rt2x00debug_poll_queue_dump, .open = rt2x00debug_open_queue_dump, .release = rt2x00debug_release_queue_dump, + .llseek = default_llseek, }; static ssize_t rt2x00debug_read_queue_stats(struct file *file, @@ -371,6 +372,7 @@ static const struct file_operations rt2x00debug_fop_queue_stats = { .read = rt2x00debug_read_queue_stats, .open = rt2x00debug_file_open, .release = rt2x00debug_file_release, + .llseek = default_llseek, }; #ifdef CONFIG_RT2X00_LIB_CRYPTO @@ -423,6 +425,7 @@ static const struct file_operations rt2x00debug_fop_crypto_stats = { .read = rt2x00debug_read_crypto_stats, .open = rt2x00debug_file_open, .release = rt2x00debug_file_release, + .llseek = default_llseek, }; #endif @@ -509,6 +512,7 @@ static const struct file_operations rt2x00debug_fop_##__name = {\ .write = rt2x00debug_write_##__name, \ .open = rt2x00debug_file_open, \ .release = rt2x00debug_file_release, \ + .llseek = generic_file_llseek, \ }; RT2X00DEBUGFS_OPS(csr, "0x%.8x\n", u32); @@ -542,6 +546,7 @@ static const struct file_operations rt2x00debug_fop_dev_flags = { .read = rt2x00debug_read_dev_flags, .open = rt2x00debug_file_open, .release = rt2x00debug_file_release, + .llseek = default_llseek, }; static struct dentry *rt2x00debug_create_file_driver(const char *name, diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c index b50c39aaec05..30107ce78dfb 100644 --- a/drivers/net/wireless/rtl818x/rtl8180_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c @@ -445,7 +445,7 @@ static int rtl8180_init_rx_ring(struct ieee80211_hw *dev) &priv->rx_ring_dma); if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) { - wiphy_err(dev->wiphy, "cannot allocate rx ring\n"); + wiphy_err(dev->wiphy, "Cannot allocate RX ring\n"); return -ENOMEM; } @@ -502,7 +502,7 @@ static int rtl8180_init_tx_ring(struct ieee80211_hw *dev, ring = pci_alloc_consistent(priv->pdev, sizeof(*ring) * entries, &dma); if (!ring || (unsigned long)ring & 0xFF) { - wiphy_err(dev->wiphy, "cannot allocate tx ring (prio = %d)\n", + wiphy_err(dev->wiphy, "Cannot allocate TX ring (prio = %d)\n", prio); return -ENOMEM; } @@ -568,7 +568,7 @@ static int rtl8180_start(struct ieee80211_hw *dev) ret = request_irq(priv->pdev->irq, rtl8180_interrupt, IRQF_SHARED, KBUILD_MODNAME, dev); if (ret) { - wiphy_err(dev->wiphy, "failed to register irq handler\n"); + wiphy_err(dev->wiphy, "failed to register IRQ handler\n"); goto err_free_rings; } diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index 5738a55c1b06..98e0351c1dd6 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -573,7 +573,7 @@ static int rtl8187_cmd_reset(struct ieee80211_hw *dev) } while (--i); if (!i) { - wiphy_err(dev->wiphy, "reset timeout!\n"); + wiphy_err(dev->wiphy, "Reset timeout!\n"); return -ETIMEDOUT; } @@ -1526,7 +1526,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, mutex_init(&priv->conf_mutex); skb_queue_head_init(&priv->b_tx_status.queue); - wiphy_info(dev->wiphy, "hwaddr %pm, %s v%d + %s, rfkill mask %d\n", + wiphy_info(dev->wiphy, "hwaddr %pM, %s V%d + %s, rfkill mask %d\n", mac_addr, chip_name, priv->asic_rev, priv->rf->name, priv->rfkill_mask); diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c index fd96f9112322..97eebdcf7eb9 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c +++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c @@ -366,7 +366,7 @@ static void rtl8225_rf_init(struct ieee80211_hw *dev) rtl8225_write(dev, 0x02, 0x044d); msleep(100); if (!(rtl8225_read(dev, 6) & (1 << 7))) - wiphy_warn(dev->wiphy, "rf calibration failed! %x\n", + wiphy_warn(dev->wiphy, "RF Calibration Failed! %x\n", rtl8225_read(dev, 6)); } @@ -735,7 +735,7 @@ static void rtl8225z2_rf_init(struct ieee80211_hw *dev) rtl8225_write(dev, 0x02, 0x044D); msleep(100); if (!(rtl8225_read(dev, 6) & (1 << 7))) - wiphy_warn(dev->wiphy, "rf calibration failed! %x\n", + wiphy_warn(dev->wiphy, "RF Calibration Failed! %x\n", rtl8225_read(dev, 6)); } diff --git a/drivers/net/wireless/wl12xx/wl1251_debugfs.c b/drivers/net/wireless/wl12xx/wl1251_debugfs.c index 5e4465ac08fa..fa620a5e5303 100644 --- a/drivers/net/wireless/wl12xx/wl1251_debugfs.c +++ b/drivers/net/wireless/wl12xx/wl1251_debugfs.c @@ -50,6 +50,7 @@ static ssize_t name## _read(struct file *file, char __user *userbuf, \ static const struct file_operations name## _ops = { \ .read = name## _read, \ .open = wl1251_open_file_generic, \ + .llseek = generic_file_llseek, \ }; #define DEBUGFS_ADD(name, parent) \ @@ -86,6 +87,7 @@ static ssize_t sub## _ ##name## _read(struct file *file, \ static const struct file_operations sub## _ ##name## _ops = { \ .read = sub## _ ##name## _read, \ .open = wl1251_open_file_generic, \ + .llseek = generic_file_llseek, \ }; #define DEBUGFS_FWSTATS_ADD(sub, name) \ @@ -236,6 +238,7 @@ static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf, static const struct file_operations tx_queue_len_ops = { .read = tx_queue_len_read, .open = wl1251_open_file_generic, + .llseek = generic_file_llseek, }; static ssize_t tx_queue_status_read(struct file *file, char __user *userbuf, @@ -257,6 +260,7 @@ static ssize_t tx_queue_status_read(struct file *file, char __user *userbuf, static const struct file_operations tx_queue_status_ops = { .read = tx_queue_status_read, .open = wl1251_open_file_generic, + .llseek = generic_file_llseek, }; static void wl1251_debugfs_delete_files(struct wl1251 *wl) diff --git a/drivers/net/wireless/wl12xx/wl1271_debugfs.c b/drivers/net/wireless/wl12xx/wl1271_debugfs.c index c239ef4d0b8d..66c2b90ddfd4 100644 --- a/drivers/net/wireless/wl12xx/wl1271_debugfs.c +++ b/drivers/net/wireless/wl12xx/wl1271_debugfs.c @@ -51,6 +51,7 @@ static ssize_t name## _read(struct file *file, char __user *userbuf, \ static const struct file_operations name## _ops = { \ .read = name## _read, \ .open = wl1271_open_file_generic, \ + .llseek = generic_file_llseek, \ }; #define DEBUGFS_ADD(name, parent) \ @@ -87,6 +88,7 @@ static ssize_t sub## _ ##name## _read(struct file *file, \ static const struct file_operations sub## _ ##name## _ops = { \ .read = sub## _ ##name## _read, \ .open = wl1271_open_file_generic, \ + .llseek = generic_file_llseek, \ }; #define DEBUGFS_FWSTATS_ADD(sub, name) \ @@ -237,6 +239,7 @@ static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf, static const struct file_operations tx_queue_len_ops = { .read = tx_queue_len_read, .open = wl1271_open_file_generic, + .llseek = default_llseek, }; static ssize_t gpio_power_read(struct file *file, char __user *user_buf, @@ -291,7 +294,8 @@ out: static const struct file_operations gpio_power_ops = { .read = gpio_power_read, .write = gpio_power_write, - .open = wl1271_open_file_generic + .open = wl1271_open_file_generic, + .llseek = default_llseek, }; static void wl1271_debugfs_delete_files(struct wl1271 *wl) diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index a1cc2d498a1c..ca3f8961fa27 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -48,7 +48,6 @@ #include <net/iw_handler.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -78,13 +77,6 @@ #define WL3501_RESUME 0 #define WL3501_SUSPEND 1 -/* - * The event() function is this driver's Card Services event handler. It will - * be called by Card Services when an appropriate card status event is - * received. The config() and release() entry points are used to configure or - * release a socket, in response to card insertion and ejection events. They - * are invoked from the wl24 event handler. - */ static int wl3501_config(struct pcmcia_device *link); static void wl3501_release(struct pcmcia_device *link); @@ -1869,15 +1861,6 @@ static const struct net_device_ops wl3501_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/** - * wl3501_attach - creates an "instance" of the driver - * - * Creates an "instance" of the driver, allocating local data structures for - * one device. The device is registered with Card Services. - * - * The dev_link structure is initialized, but we don't actually configure the - * card at this point -- we wait until we receive a card insertion event. - */ static int wl3501_probe(struct pcmcia_device *p_dev) { struct net_device *dev; @@ -1888,9 +1871,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags = IO_DATA_PATH_WIDTH_8; /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - p_dev->conf.ConfigIndex = 1; + p_dev->config_flags = CONF_ENABLE_IRQ; + p_dev->config_index = 1; dev = alloc_etherdev(sizeof(struct wl3501_card)); if (!dev) @@ -1914,14 +1896,6 @@ out_link: return -ENOMEM; } -/** - * wl3501_config - configure the PCMCIA socket and make eth device available - * @link - FILL_IN - * - * wl3501_config() is scheduled to run after a CARD_INSERTION event is - * received, to configure the PCMCIA socket, and to make the ethernet device - * available to the system. - */ static int wl3501_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -1952,10 +1926,7 @@ static int wl3501_config(struct pcmcia_device *link) if (ret) goto failed; - /* This actually configures the PCMCIA socket -- setting up the I/O - * windows and the interrupt mapping. */ - - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -2010,14 +1981,6 @@ failed: return -ENODEV; } -/** - * wl3501_release - unregister the net, release PCMCIA configuration - * @arg - link - * - * After a card is removed, wl3501_release() will unregister the net device, - * and release the PCMCIA configuration. If the device is still open, this - * will be postponed until it is closed. - */ static void wl3501_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -2056,9 +2019,7 @@ MODULE_DEVICE_TABLE(pcmcia, wl3501_ids); static struct pcmcia_driver wl3501_driver = { .owner = THIS_MODULE, - .drv = { - .name = "wl3501_cs", - }, + .name = "wl3501_cs", .probe = wl3501_probe, .remove = wl3501_detach, .id_table = wl3501_ids, |