aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/aquantia/aquantia_main.c51
-rw-r--r--drivers/net/phy/bcm84881.c4
-rw-r--r--drivers/net/phy/dp83822.c4
-rw-r--r--drivers/net/phy/dp83848.c2
-rw-r--r--drivers/net/phy/dp83869.c1
-rw-r--r--drivers/net/phy/phy_device.c5
-rw-r--r--drivers/net/phy/phylink.c14
-rw-r--r--drivers/net/phy/realtek.c24
8 files changed, 73 insertions, 32 deletions
diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 4d156d406bab..c33a5ef34ba0 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -537,12 +537,6 @@ static int aqcs109_config_init(struct phy_device *phydev)
if (!ret)
aqr107_chip_info(phydev);
- /* AQCS109 belongs to a chip family partially supporting 10G and 5G.
- * PMA speed ability bits are the same for all members of the family,
- * AQCS109 however supports speeds up to 2.5G only.
- */
- phy_set_max_speed(phydev, SPEED_2500);
-
return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
}
@@ -731,6 +725,31 @@ static int aqr113c_fill_interface_modes(struct phy_device *phydev)
return aqr107_fill_interface_modes(phydev);
}
+static int aqr115c_get_features(struct phy_device *phydev)
+{
+ unsigned long *supported = phydev->supported;
+
+ /* PHY supports speeds up to 2.5G with autoneg. PMA capabilities
+ * are not useful.
+ */
+ linkmode_or(supported, supported, phy_gbit_features);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, supported);
+
+ return 0;
+}
+
+static int aqr111_get_features(struct phy_device *phydev)
+{
+ /* PHY supports speeds up to 5G with autoneg. PMA capabilities
+ * are not useful.
+ */
+ aqr115c_get_features(phydev);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+ phydev->supported);
+
+ return 0;
+}
+
static int aqr113c_config_init(struct phy_device *phydev)
{
int ret;
@@ -767,15 +786,6 @@ static int aqr107_probe(struct phy_device *phydev)
return aqr_hwmon_probe(phydev);
}
-static int aqr111_config_init(struct phy_device *phydev)
-{
- /* AQR111 reports supporting speed up to 10G,
- * however only speeds up to 5G are supported.
- */
- phy_set_max_speed(phydev, SPEED_5000);
-
- return aqr107_config_init(phydev);
-}
static struct phy_driver aqr_driver[] = {
{
@@ -853,6 +863,7 @@ static struct phy_driver aqr_driver[] = {
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
+ .get_features = aqr115c_get_features,
.link_change_notify = aqr107_link_change_notify,
.led_brightness_set = aqr_phy_led_brightness_set,
.led_hw_is_supported = aqr_phy_led_hw_is_supported,
@@ -865,7 +876,7 @@ static struct phy_driver aqr_driver[] = {
.name = "Aquantia AQR111",
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
- .config_init = aqr111_config_init,
+ .config_init = aqr107_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
@@ -877,6 +888,7 @@ static struct phy_driver aqr_driver[] = {
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
+ .get_features = aqr111_get_features,
.link_change_notify = aqr107_link_change_notify,
.led_brightness_set = aqr_phy_led_brightness_set,
.led_hw_is_supported = aqr_phy_led_hw_is_supported,
@@ -889,7 +901,7 @@ static struct phy_driver aqr_driver[] = {
.name = "Aquantia AQR111B0",
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
- .config_init = aqr111_config_init,
+ .config_init = aqr107_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
@@ -901,6 +913,7 @@ static struct phy_driver aqr_driver[] = {
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
+ .get_features = aqr111_get_features,
.link_change_notify = aqr107_link_change_notify,
.led_brightness_set = aqr_phy_led_brightness_set,
.led_hw_is_supported = aqr_phy_led_hw_is_supported,
@@ -1010,7 +1023,7 @@ static struct phy_driver aqr_driver[] = {
.name = "Aquantia AQR114C",
.probe = aqr107_probe,
.get_rate_matching = aqr107_get_rate_matching,
- .config_init = aqr111_config_init,
+ .config_init = aqr107_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
@@ -1022,6 +1035,7 @@ static struct phy_driver aqr_driver[] = {
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
+ .get_features = aqr111_get_features,
.link_change_notify = aqr107_link_change_notify,
.led_brightness_set = aqr_phy_led_brightness_set,
.led_hw_is_supported = aqr_phy_led_hw_is_supported,
@@ -1046,6 +1060,7 @@ static struct phy_driver aqr_driver[] = {
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
+ .get_features = aqr115c_get_features,
.link_change_notify = aqr107_link_change_notify,
.led_brightness_set = aqr_phy_led_brightness_set,
.led_hw_is_supported = aqr_phy_led_hw_is_supported,
diff --git a/drivers/net/phy/bcm84881.c b/drivers/net/phy/bcm84881.c
index f1d47c264058..97da3aee4942 100644
--- a/drivers/net/phy/bcm84881.c
+++ b/drivers/net/phy/bcm84881.c
@@ -132,7 +132,7 @@ static int bcm84881_aneg_done(struct phy_device *phydev)
bmsr = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_C22 + MII_BMSR);
if (bmsr < 0)
- return val;
+ return bmsr;
return !!(val & MDIO_AN_STAT1_COMPLETE) &&
!!(bmsr & BMSR_ANEGCOMPLETE);
@@ -158,7 +158,7 @@ static int bcm84881_read_status(struct phy_device *phydev)
bmsr = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_C22 + MII_BMSR);
if (bmsr < 0)
- return val;
+ return bmsr;
phydev->autoneg_complete = !!(val & MDIO_AN_STAT1_COMPLETE) &&
!!(bmsr & BMSR_ANEGCOMPLETE);
diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index fc247f479257..3ab64e04a01c 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -45,8 +45,8 @@
/* Control Register 2 bits */
#define DP83822_FX_ENABLE BIT(14)
-#define DP83822_HW_RESET BIT(15)
-#define DP83822_SW_RESET BIT(14)
+#define DP83822_SW_RESET BIT(15)
+#define DP83822_DIG_RESTART BIT(14)
/* PHY STS bits */
#define DP83822_PHYSTS_DUPLEX BIT(2)
diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
index 937061acfc61..351411f0aa6f 100644
--- a/drivers/net/phy/dp83848.c
+++ b/drivers/net/phy/dp83848.c
@@ -147,6 +147,8 @@ MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
/* IRQ related */ \
.config_intr = dp83848_config_intr, \
.handle_interrupt = dp83848_handle_interrupt, \
+ \
+ .flags = PHY_RST_AFTER_CLK_EN, \
}
static struct phy_driver dp83848_driver[] = {
diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c
index d7aaefb5226b..5f056d7db83e 100644
--- a/drivers/net/phy/dp83869.c
+++ b/drivers/net/phy/dp83869.c
@@ -645,7 +645,6 @@ static int dp83869_configure_fiber(struct phy_device *phydev,
phydev->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported);
- linkmode_set_bit(ADVERTISED_FIBRE, phydev->advertising);
if (dp83869->mode == DP83869_RGMII_1000_BASE) {
linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 560e338b307a..499797646580 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -3326,10 +3326,11 @@ static __maybe_unused int phy_led_hw_is_supported(struct led_classdev *led_cdev,
static void phy_leds_unregister(struct phy_device *phydev)
{
- struct phy_led *phyled;
+ struct phy_led *phyled, *tmp;
- list_for_each_entry(phyled, &phydev->leds, list) {
+ list_for_each_entry_safe(phyled, tmp, &phydev->leds, list) {
led_classdev_unregister(&phyled->led_cdev);
+ list_del(&phyled->list);
}
}
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 4309317de3d1..3e9957b6aa14 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -78,7 +78,7 @@ struct phylink {
unsigned int pcs_neg_mode;
unsigned int pcs_state;
- bool mac_link_dropped;
+ bool link_failed;
bool using_mac_select_pcs;
struct sfp_bus *sfp_bus;
@@ -1475,9 +1475,9 @@ static void phylink_resolve(struct work_struct *w)
cur_link_state = pl->old_link_state;
if (pl->phylink_disable_state) {
- pl->mac_link_dropped = false;
+ pl->link_failed = false;
link_state.link = false;
- } else if (pl->mac_link_dropped) {
+ } else if (pl->link_failed) {
link_state.link = false;
retrigger = true;
} else {
@@ -1572,7 +1572,7 @@ static void phylink_resolve(struct work_struct *w)
phylink_link_up(pl, link_state);
}
if (!link_state.link && retrigger) {
- pl->mac_link_dropped = false;
+ pl->link_failed = false;
queue_work(system_power_efficient_wq, &pl->resolve);
}
mutex_unlock(&pl->state_mutex);
@@ -1835,6 +1835,8 @@ static void phylink_phy_change(struct phy_device *phydev, bool up)
pl->phy_state.pause |= MLO_PAUSE_RX;
pl->phy_state.interface = phydev->interface;
pl->phy_state.link = up;
+ if (!up)
+ pl->link_failed = true;
mutex_unlock(&pl->state_mutex);
phylink_run_resolve(pl);
@@ -2158,7 +2160,7 @@ EXPORT_SYMBOL_GPL(phylink_disconnect_phy);
static void phylink_link_changed(struct phylink *pl, bool up, const char *what)
{
if (!up)
- pl->mac_link_dropped = true;
+ pl->link_failed = true;
phylink_run_resolve(pl);
phylink_dbg(pl, "%s link %s\n", what, up ? "up" : "down");
}
@@ -2792,7 +2794,7 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
* link will cycle.
*/
if (manual_changed) {
- pl->mac_link_dropped = true;
+ pl->link_failed = true;
phylink_run_resolve(pl);
}
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index c15d2f66ef0d..166f6a728373 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -1081,6 +1081,16 @@ static int rtl8221b_vn_cg_c45_match_phy_device(struct phy_device *phydev)
return rtlgen_is_c45_match(phydev, RTL_8221B_VN_CG, true);
}
+static int rtl8251b_c22_match_phy_device(struct phy_device *phydev)
+{
+ return rtlgen_is_c45_match(phydev, RTL_8251B, false);
+}
+
+static int rtl8251b_c45_match_phy_device(struct phy_device *phydev)
+{
+ return rtlgen_is_c45_match(phydev, RTL_8251B, true);
+}
+
static int rtlgen_resume(struct phy_device *phydev)
{
int ret = genphy_resume(phydev);
@@ -1418,7 +1428,7 @@ static struct phy_driver realtek_drvs[] = {
.suspend = genphy_c45_pma_suspend,
.resume = rtlgen_c45_resume,
}, {
- PHY_ID_MATCH_EXACT(0x001cc862),
+ .match_phy_device = rtl8251b_c45_match_phy_device,
.name = "RTL8251B 5Gbps PHY",
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
@@ -1428,6 +1438,18 @@ static struct phy_driver realtek_drvs[] = {
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
+ .match_phy_device = rtl8251b_c22_match_phy_device,
+ .name = "RTL8126A-internal 5Gbps PHY",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .read_status = rtl822x_read_status,
+ .suspend = genphy_suspend,
+ .resume = rtlgen_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ .read_mmd = rtl822x_read_mmd,
+ .write_mmd = rtl822x_write_mmd,
+ }, {
PHY_ID_MATCH_EXACT(0x001ccad0),
.name = "RTL8224 2.5Gbps PHY",
.get_features = rtl822x_c45_get_features,
Powered by cgit, Gruvboxed by Blaster4385.