3 files changed, 47 insertions, 23 deletions

diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index d12e35374231..e982e9ce44a5 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -653,13 +653,7 @@ static int aqr107_fill_interface_modes(struct phy_device *phydev)
 	unsigned long *possible = phydev->possible_interfaces;
 	unsigned int serdes_mode, rate_adapt;
 	phy_interface_t interface;
-	int i, val, ret;
-
-	ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
-					VEND1_GLOBAL_CFG_10M, val, val != 0,
-					1000, 100000, false);
-	if (ret)
-		return ret;
+	int i, val;
 
 	/* Walk the media-speed configuration registers to determine which
 	 * host-side serdes modes may be used by the PHY depending on the
@@ -708,6 +702,25 @@ static int aqr107_fill_interface_modes(struct phy_device *phydev)
 	return 0;
 }
 
+static int aqr113c_fill_interface_modes(struct phy_device *phydev)
+{
+	int val, ret;
+
+	/* It's been observed on some models that - when coming out of suspend
+	 * - the FW signals that the PHY is ready but the GLOBAL_CFG registers
+	 * continue on returning zeroes for some time. Let's poll the 100M
+	 * register until it returns a real value as both 113c and 115c support
+	 * this mode.
+	 */
+	ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
+					VEND1_GLOBAL_CFG_100M, val, val != 0,
+					1000, 100000, false);
+	if (ret)
+		return ret;
+
+	return aqr107_fill_interface_modes(phydev);
+}
+
 static int aqr113c_config_init(struct phy_device *phydev)
 {
 	int ret;
@@ -725,7 +738,7 @@ static int aqr113c_config_init(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	return aqr107_fill_interface_modes(phydev);
+	return aqr113c_fill_interface_modes(phydev);
 }
 
 static int aqr107_probe(struct phy_device *phydev)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index dd519805deee..65b0a3115e14 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -1389,6 +1389,8 @@ static int ksz9131_config_init(struct phy_device *phydev)
 	const struct device *dev_walker;
 	int ret;
 
+	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+
 	dev_walker = &phydev->mdio.dev;
 	do {
 		of_node = dev_walker->of_node;
@@ -1438,28 +1440,30 @@ static int ksz9131_config_init(struct phy_device *phydev)
 #define MII_KSZ9131_AUTO_MDIX		0x1C
 #define MII_KSZ9131_AUTO_MDI_SET	BIT(7)
 #define MII_KSZ9131_AUTO_MDIX_SWAP_OFF	BIT(6)
+#define MII_KSZ9131_DIG_AXAN_STS	0x14
+#define MII_KSZ9131_DIG_AXAN_STS_LINK_DET	BIT(14)
+#define MII_KSZ9131_DIG_AXAN_STS_A_SELECT	BIT(12)
 
 static int ksz9131_mdix_update(struct phy_device *phydev)
 {
 	int ret;
 
-	ret = phy_read(phydev, MII_KSZ9131_AUTO_MDIX);
-	if (ret < 0)
-		return ret;
-
-	if (ret & MII_KSZ9131_AUTO_MDIX_SWAP_OFF) {
-		if (ret & MII_KSZ9131_AUTO_MDI_SET)
-			phydev->mdix_ctrl = ETH_TP_MDI;
-		else
-			phydev->mdix_ctrl = ETH_TP_MDI_X;
+	if (phydev->mdix_ctrl != ETH_TP_MDI_AUTO) {
+		phydev->mdix = phydev->mdix_ctrl;
 	} else {
-		phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
-	}
+		ret = phy_read(phydev, MII_KSZ9131_DIG_AXAN_STS);
+		if (ret < 0)
+			return ret;
 
-	if (ret & MII_KSZ9131_AUTO_MDI_SET)
-		phydev->mdix = ETH_TP_MDI;
-	else
-		phydev->mdix = ETH_TP_MDI_X;
+		if (ret & MII_KSZ9131_DIG_AXAN_STS_LINK_DET) {
+			if (ret & MII_KSZ9131_DIG_AXAN_STS_A_SELECT)
+				phydev->mdix = ETH_TP_MDI;
+			else
+				phydev->mdix = ETH_TP_MDI_X;
+		} else {
+			phydev->mdix = ETH_TP_MDI_INVALID;
+		}
+	}
 
 	return 0;
 }
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index bed839237fb5..87865918dab6 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -1465,6 +1465,13 @@ static struct phy_driver realtek_drvs[] = {
 		.handle_interrupt = genphy_handle_interrupt_no_ack,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
+	}, {
+		PHY_ID_MATCH_EXACT(0x001cc960),
+		.name		= "RTL8366S Gigabit Ethernet",
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.read_mmd	= genphy_read_mmd_unsupported,
+		.write_mmd	= genphy_write_mmd_unsupported,
 	},
 };