aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/at803x.c47
-rw-r--r--drivers/net/phy/broadcom.c13
-rw-r--r--drivers/net/phy/marvell10g.c7
-rw-r--r--drivers/net/phy/phy_device.c34
4 files changed, 61 insertions, 40 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index c1f307d90518..8a77ec33b417 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -459,21 +459,27 @@ static int at803x_set_wol(struct phy_device *phydev,
phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i],
mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
- /* Enable WOL function */
- ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL,
- 0, AT803X_WOL_EN);
- if (ret)
- return ret;
+ /* Enable WOL function for 1588 */
+ if (phydev->drv->phy_id == ATH8031_PHY_ID) {
+ ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
+ AT803X_PHY_MMD3_WOL_CTRL,
+ 0, AT803X_WOL_EN);
+ if (ret)
+ return ret;
+ }
/* Enable WOL interrupt */
ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL);
if (ret)
return ret;
} else {
- /* Disable WoL function */
- ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL,
- AT803X_WOL_EN, 0);
- if (ret)
- return ret;
+ /* Disable WoL function for 1588 */
+ if (phydev->drv->phy_id == ATH8031_PHY_ID) {
+ ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
+ AT803X_PHY_MMD3_WOL_CTRL,
+ AT803X_WOL_EN, 0);
+ if (ret)
+ return ret;
+ }
/* Disable WOL interrupt */
ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0);
if (ret)
@@ -508,11 +514,11 @@ static void at803x_get_wol(struct phy_device *phydev,
wol->supported = WAKE_MAGIC;
wol->wolopts = 0;
- value = phy_read_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL);
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
if (value < 0)
return;
- if (value & AT803X_WOL_EN)
+ if (value & AT803X_INTR_ENABLE_WOL)
wol->wolopts |= WAKE_MAGIC;
}
@@ -858,9 +864,6 @@ static int at803x_probe(struct phy_device *phydev)
if (phydev->drv->phy_id == ATH8031_PHY_ID) {
int ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
int mode_cfg;
- struct ethtool_wolinfo wol = {
- .wolopts = 0,
- };
if (ccr < 0)
return ccr;
@@ -877,12 +880,14 @@ static int at803x_probe(struct phy_device *phydev)
break;
}
- /* Disable WOL by default */
- ret = at803x_set_wol(phydev, &wol);
- if (ret < 0) {
- phydev_err(phydev, "failed to disable WOL on probe: %d\n", ret);
+ /* Disable WoL in 1588 register which is enabled
+ * by default
+ */
+ ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
+ AT803X_PHY_MMD3_WOL_CTRL,
+ AT803X_WOL_EN, 0);
+ if (ret)
return ret;
- }
}
return 0;
@@ -2059,8 +2064,6 @@ static struct phy_driver at803x_driver[] = {
.flags = PHY_POLL_CABLE_TEST,
.config_init = at803x_config_init,
.link_change_notify = at803x_link_change_notify,
- .set_wol = at803x_set_wol,
- .get_wol = at803x_get_wol,
.suspend = at803x_suspend,
.resume = at803x_resume,
/* PHY_BASIC_FEATURES */
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 59cae0d808aa..04b2e6eeb195 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -542,6 +542,17 @@ static int bcm54xx_resume(struct phy_device *phydev)
return bcm54xx_config_init(phydev);
}
+static int bcm54810_read_mmd(struct phy_device *phydev, int devnum, u16 regnum)
+{
+ return -EOPNOTSUPP;
+}
+
+static int bcm54810_write_mmd(struct phy_device *phydev, int devnum, u16 regnum,
+ u16 val)
+{
+ return -EOPNOTSUPP;
+}
+
static int bcm54811_config_init(struct phy_device *phydev)
{
int err, reg;
@@ -1103,6 +1114,8 @@ static struct phy_driver broadcom_drivers[] = {
.get_strings = bcm_phy_get_strings,
.get_stats = bcm54xx_get_stats,
.probe = bcm54xx_phy_probe,
+ .read_mmd = bcm54810_read_mmd,
+ .write_mmd = bcm54810_write_mmd,
.config_init = bcm54xx_config_init,
.config_aneg = bcm5481_config_aneg,
.config_intr = bcm_phy_config_intr,
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 55d9d7acc32e..d4bb90d76881 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -328,6 +328,13 @@ static int mv3310_power_up(struct phy_device *phydev)
ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
MV_V2_PORT_CTRL_PWRDOWN);
+ /* Sometimes, the power down bit doesn't clear immediately, and
+ * a read of this register causes the bit not to clear. Delay
+ * 100us to allow the PHY to come out of power down mode before
+ * the next access.
+ */
+ udelay(100);
+
if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310 ||
priv->firmware_ver < 0x00030000)
return ret;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 0c2014accba7..c7cf61fe41cf 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -3216,6 +3216,8 @@ static int phy_probe(struct device *dev)
goto out;
}
+ phy_disable_interrupts(phydev);
+
/* Start out supporting everything. Eventually,
* a controller will attach, and may modify one
* or both of these values
@@ -3333,16 +3335,6 @@ static int phy_remove(struct device *dev)
return 0;
}
-static void phy_shutdown(struct device *dev)
-{
- struct phy_device *phydev = to_phy_device(dev);
-
- if (phydev->state == PHY_READY || !phydev->attached_dev)
- return;
-
- phy_disable_interrupts(phydev);
-}
-
/**
* phy_driver_register - register a phy_driver with the PHY layer
* @new_driver: new phy_driver to register
@@ -3376,7 +3368,6 @@ int phy_driver_register(struct phy_driver *new_driver, struct module *owner)
new_driver->mdiodrv.driver.bus = &mdio_bus_type;
new_driver->mdiodrv.driver.probe = phy_probe;
new_driver->mdiodrv.driver.remove = phy_remove;
- new_driver->mdiodrv.driver.shutdown = phy_shutdown;
new_driver->mdiodrv.driver.owner = owner;
new_driver->mdiodrv.driver.probe_type = PROBE_FORCE_SYNCHRONOUS;
@@ -3451,23 +3442,30 @@ static int __init phy_init(void)
{
int rc;
+ ethtool_set_ethtool_phy_ops(&phy_ethtool_phy_ops);
+
rc = mdio_bus_init();
if (rc)
- return rc;
+ goto err_ethtool_phy_ops;
- ethtool_set_ethtool_phy_ops(&phy_ethtool_phy_ops);
features_init();
rc = phy_driver_register(&genphy_c45_driver, THIS_MODULE);
if (rc)
- goto err_c45;
+ goto err_mdio_bus;
rc = phy_driver_register(&genphy_driver, THIS_MODULE);
- if (rc) {
- phy_driver_unregister(&genphy_c45_driver);
+ if (rc)
+ goto err_c45;
+
+ return 0;
+
err_c45:
- mdio_bus_exit();
- }
+ phy_driver_unregister(&genphy_c45_driver);
+err_mdio_bus:
+ mdio_bus_exit();
+err_ethtool_phy_ops:
+ ethtool_set_ethtool_phy_ops(NULL);
return rc;
}
Powered by cgit, Gruvboxed by Blaster4385.