diff options
Diffstat (limited to 'drivers/net/phy/phy_device.c')
-rw-r--r-- | drivers/net/phy/phy_device.c | 93 |
1 files changed, 80 insertions, 13 deletions
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 1a4bf8acad78..aeaf1bcb12d0 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -30,6 +30,7 @@ #include <linux/mii.h> #include <linux/ethtool.h> #include <linux/phy.h> +#include <linux/phy_led_triggers.h> #include <linux/mdio.h> #include <linux/io.h> #include <linux/uaccess.h> @@ -347,7 +348,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, mutex_init(&dev->lock); INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine); - INIT_WORK(&dev->phy_queue, phy_change); + INIT_WORK(&dev->phy_queue, phy_change_work); /* Request the appropriate module unconditionally; don't * bother trying to do so only if it isn't already loaded, @@ -913,13 +914,15 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, */ err = phy_init_hw(phydev); if (err) - phy_detach(phydev); - else - phy_resume(phydev); + goto error; + + phy_resume(phydev); + phy_led_triggers_register(phydev); return err; error: + phy_detach(phydev); put_device(d); module_put(bus->owner); return err; @@ -978,6 +981,8 @@ void phy_detach(struct phy_device *phydev) phydev->attached_dev = NULL; phy_suspend(phydev); + phy_led_triggers_unregister(phydev); + /* If the device had no specific driver before (i.e. - it * was using the generic driver), we unbind the device * from the generic driver so that there's a chance a @@ -1116,6 +1121,43 @@ static int genphy_config_advert(struct phy_device *phydev) } /** + * genphy_config_eee_advert - disable unwanted eee mode advertisement + * @phydev: target phy_device struct + * + * Description: Writes MDIO_AN_EEE_ADV after disabling unsupported energy + * efficent ethernet modes. Returns 0 if the PHY's advertisement hasn't + * changed, and 1 if it has changed. + */ +static int genphy_config_eee_advert(struct phy_device *phydev) +{ + u32 broken = phydev->eee_broken_modes; + u32 old_adv, adv; + + /* Nothing to disable */ + if (!broken) + return 0; + + /* If the following call fails, we assume that EEE is not + * supported by the phy. If we read 0, EEE is not advertised + * In both case, we don't need to continue + */ + adv = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN); + if (adv <= 0) + return 0; + + old_adv = adv; + adv &= ~broken; + + /* Advertising remains unchanged with the broken mask */ + if (old_adv == adv) + return 0; + + phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, adv); + + return 1; +} + +/** * genphy_setup_forced - configures/forces speed/duplex from @phydev * @phydev: target phy_device struct * @@ -1173,15 +1215,20 @@ EXPORT_SYMBOL(genphy_restart_aneg); */ int genphy_config_aneg(struct phy_device *phydev) { - int result; + int err, changed; + + changed = genphy_config_eee_advert(phydev); if (AUTONEG_ENABLE != phydev->autoneg) return genphy_setup_forced(phydev); - result = genphy_config_advert(phydev); - if (result < 0) /* error */ - return result; - if (result == 0) { + err = genphy_config_advert(phydev); + if (err < 0) /* error */ + return err; + + changed |= err; + + if (changed == 0) { /* Advertisement hasn't changed, but maybe aneg was never on to * begin with? Or maybe phy was isolated? */ @@ -1191,16 +1238,16 @@ int genphy_config_aneg(struct phy_device *phydev) return ctl; if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) - result = 1; /* do restart aneg */ + changed = 1; /* do restart aneg */ } /* Only restart aneg if we are advertising something different * than we were before. */ - if (result > 0) - result = genphy_restart_aneg(phydev); + if (changed > 0) + return genphy_restart_aneg(phydev); - return result; + return 0; } EXPORT_SYMBOL(genphy_config_aneg); @@ -1558,6 +1605,21 @@ static void of_set_phy_supported(struct phy_device *phydev) __set_phy_supported(phydev, max_speed); } +static void of_set_phy_eee_broken(struct phy_device *phydev) +{ + struct device_node *node = phydev->mdio.dev.of_node; + u32 broken; + + if (!IS_ENABLED(CONFIG_OF_MDIO)) + return; + + if (!node) + return; + + if (!of_property_read_u32(node, "eee-broken-modes", &broken)) + phydev->eee_broken_modes = broken; +} + /** * phy_probe - probe and init a PHY device * @dev: device to probe and init @@ -1595,6 +1657,11 @@ static int phy_probe(struct device *dev) of_set_phy_supported(phydev); phydev->advertising = phydev->supported; + /* Get the EEE modes we want to prohibit. We will ask + * the PHY stop advertising these mode later on + */ + of_set_phy_eee_broken(phydev); + /* Set the state to READY by default */ phydev->state = PHY_READY; |