diff options
Diffstat (limited to 'drivers/net/phy/open_alliance_helpers.h')
-rw-r--r-- | drivers/net/phy/open_alliance_helpers.h | 47 |
1 files changed, 47 insertions, 0 deletions
diff --git a/drivers/net/phy/open_alliance_helpers.h b/drivers/net/phy/open_alliance_helpers.h new file mode 100644 index 000000000000..8b7d97bc6f18 --- /dev/null +++ b/drivers/net/phy/open_alliance_helpers.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef OPEN_ALLIANCE_HELPERS_H +#define OPEN_ALLIANCE_HELPERS_H + +/* + * These defines reflect the TDR (Time Delay Reflection) diagnostic feature + * for 1000BASE-T1 automotive Ethernet PHYs as specified by the OPEN Alliance. + * + * The register values are part of the HDD.TDR register, which provides + * information about the cable status and faults. The exact register offset + * is device-specific and should be provided by the driver. + */ +#define OA_1000BT1_HDD_TDR_ACTIVATION_MASK GENMASK(1, 0) +#define OA_1000BT1_HDD_TDR_ACTIVATION_OFF 1 +#define OA_1000BT1_HDD_TDR_ACTIVATION_ON 2 + +#define OA_1000BT1_HDD_TDR_STATUS_MASK GENMASK(7, 4) +#define OA_1000BT1_HDD_TDR_STATUS_SHORT 3 +#define OA_1000BT1_HDD_TDR_STATUS_OPEN 6 +#define OA_1000BT1_HDD_TDR_STATUS_NOISE 5 +#define OA_1000BT1_HDD_TDR_STATUS_CABLE_OK 7 +#define OA_1000BT1_HDD_TDR_STATUS_TEST_IN_PROGRESS 8 +#define OA_1000BT1_HDD_TDR_STATUS_TEST_NOT_POSSIBLE 13 + +/* + * OA_1000BT1_HDD_TDR_DISTANCE_MASK: + * This mask is used to extract the distance to the first/main fault + * detected by the TDR feature. Each bit represents an approximate distance + * of 1 meter, ranging from 0 to 31 meters. The exact interpretation of the + * bits may vary, but generally: + * 000000 = no error + * 000001 = error about 0-1m away + * 000010 = error between 1-2m away + * ... + * 011111 = error about 30-31m away + * 111111 = resolution not possible / out of distance + */ +#define OA_1000BT1_HDD_TDR_DISTANCE_MASK GENMASK(13, 8) +#define OA_1000BT1_HDD_TDR_DISTANCE_NO_ERROR 0 +#define OA_1000BT1_HDD_TDR_DISTANCE_RESOLUTION_NOT_POSSIBLE 0x3f + +int oa_1000bt1_get_ethtool_cable_result_code(u16 reg_value); +int oa_1000bt1_get_tdr_distance(u16 reg_value); + +#endif /* OPEN_ALLIANCE_HELPERS_H */ + |