diff options
Diffstat (limited to 'drivers/net/phy/at803x.c')
| -rw-r--r-- | drivers/net/phy/at803x.c | 867 |
1 files changed, 484 insertions, 383 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 37fb033e1c29..a7d28848ee93 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -295,12 +295,17 @@ struct at803x_hw_stat { enum stat_access_type access_type; }; -static struct at803x_hw_stat at803x_hw_stats[] = { +static struct at803x_hw_stat qca83xx_hw_stats[] = { { "phy_idle_errors", 0xa, GENMASK(7, 0), PHY}, { "phy_receive_errors", 0x15, GENMASK(15, 0), PHY}, { "eee_wake_errors", 0x16, GENMASK(15, 0), MMD}, }; +struct at803x_ss_mask { + u16 speed_mask; + u8 speed_shift; +}; + struct at803x_priv { int flags; u16 clk_25m_reg; @@ -311,7 +316,7 @@ struct at803x_priv { bool is_1000basex; struct regulator_dev *vddio_rdev; struct regulator_dev *vddh_rdev; - u64 stats[ARRAY_SIZE(at803x_hw_stats)]; + u64 stats[ARRAY_SIZE(qca83xx_hw_stats)]; }; struct at803x_context { @@ -466,27 +471,11 @@ static int at803x_set_wol(struct phy_device *phydev, phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i], mac[(i * 2) + 1] | (mac[(i * 2)] << 8)); - /* Enable WOL function for 1588 */ - if (phydev->drv->phy_id == ATH8031_PHY_ID) { - ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, - AT803X_PHY_MMD3_WOL_CTRL, - 0, AT803X_WOL_EN); - if (ret) - return ret; - } /* Enable WOL interrupt */ ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL); if (ret) return ret; } else { - /* Disable WoL function for 1588 */ - if (phydev->drv->phy_id == ATH8031_PHY_ID) { - ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, - AT803X_PHY_MMD3_WOL_CTRL, - AT803X_WOL_EN, 0); - if (ret) - return ret; - } /* Disable WOL interrupt */ ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0); if (ret) @@ -529,24 +518,24 @@ static void at803x_get_wol(struct phy_device *phydev, wol->wolopts |= WAKE_MAGIC; } -static int at803x_get_sset_count(struct phy_device *phydev) +static int qca83xx_get_sset_count(struct phy_device *phydev) { - return ARRAY_SIZE(at803x_hw_stats); + return ARRAY_SIZE(qca83xx_hw_stats); } -static void at803x_get_strings(struct phy_device *phydev, u8 *data) +static void qca83xx_get_strings(struct phy_device *phydev, u8 *data) { int i; - for (i = 0; i < ARRAY_SIZE(at803x_hw_stats); i++) { + for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) { strscpy(data + i * ETH_GSTRING_LEN, - at803x_hw_stats[i].string, ETH_GSTRING_LEN); + qca83xx_hw_stats[i].string, ETH_GSTRING_LEN); } } -static u64 at803x_get_stat(struct phy_device *phydev, int i) +static u64 qca83xx_get_stat(struct phy_device *phydev, int i) { - struct at803x_hw_stat stat = at803x_hw_stats[i]; + struct at803x_hw_stat stat = qca83xx_hw_stats[i]; struct at803x_priv *priv = phydev->priv; int val; u64 ret; @@ -567,13 +556,13 @@ static u64 at803x_get_stat(struct phy_device *phydev, int i) return ret; } -static void at803x_get_stats(struct phy_device *phydev, - struct ethtool_stats *stats, u64 *data) +static void qca83xx_get_stats(struct phy_device *phydev, + struct ethtool_stats *stats, u64 *data) { int i; - for (i = 0; i < ARRAY_SIZE(at803x_hw_stats); i++) - data[i] = at803x_get_stat(phydev, i); + for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) + data[i] = qca83xx_get_stat(phydev, i); } static int at803x_suspend(struct phy_device *phydev) @@ -599,139 +588,6 @@ static int at803x_resume(struct phy_device *phydev) return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0); } -static int at803x_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev, - unsigned int selector) -{ - struct phy_device *phydev = rdev_get_drvdata(rdev); - - if (selector) - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, - 0, AT803X_DEBUG_RGMII_1V8); - else - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, - AT803X_DEBUG_RGMII_1V8, 0); -} - -static int at803x_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev) -{ - struct phy_device *phydev = rdev_get_drvdata(rdev); - int val; - - val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F); - if (val < 0) - return val; - - return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0; -} - -static const struct regulator_ops vddio_regulator_ops = { - .list_voltage = regulator_list_voltage_table, - .set_voltage_sel = at803x_rgmii_reg_set_voltage_sel, - .get_voltage_sel = at803x_rgmii_reg_get_voltage_sel, -}; - -static const unsigned int vddio_voltage_table[] = { - 1500000, - 1800000, -}; - -static const struct regulator_desc vddio_desc = { - .name = "vddio", - .of_match = of_match_ptr("vddio-regulator"), - .n_voltages = ARRAY_SIZE(vddio_voltage_table), - .volt_table = vddio_voltage_table, - .ops = &vddio_regulator_ops, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, -}; - -static const struct regulator_ops vddh_regulator_ops = { -}; - -static const struct regulator_desc vddh_desc = { - .name = "vddh", - .of_match = of_match_ptr("vddh-regulator"), - .n_voltages = 1, - .fixed_uV = 2500000, - .ops = &vddh_regulator_ops, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, -}; - -static int at8031_register_regulators(struct phy_device *phydev) -{ - struct at803x_priv *priv = phydev->priv; - struct device *dev = &phydev->mdio.dev; - struct regulator_config config = { }; - - config.dev = dev; - config.driver_data = phydev; - - priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config); - if (IS_ERR(priv->vddio_rdev)) { - phydev_err(phydev, "failed to register VDDIO regulator\n"); - return PTR_ERR(priv->vddio_rdev); - } - - priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config); - if (IS_ERR(priv->vddh_rdev)) { - phydev_err(phydev, "failed to register VDDH regulator\n"); - return PTR_ERR(priv->vddh_rdev); - } - - return 0; -} - -static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) -{ - struct phy_device *phydev = upstream; - __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support); - __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); - DECLARE_PHY_INTERFACE_MASK(interfaces); - phy_interface_t iface; - - linkmode_zero(phy_support); - phylink_set(phy_support, 1000baseX_Full); - phylink_set(phy_support, 1000baseT_Full); - phylink_set(phy_support, Autoneg); - phylink_set(phy_support, Pause); - phylink_set(phy_support, Asym_Pause); - - linkmode_zero(sfp_support); - sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces); - /* Some modules support 10G modes as well as others we support. - * Mask out non-supported modes so the correct interface is picked. - */ - linkmode_and(sfp_support, phy_support, sfp_support); - - if (linkmode_empty(sfp_support)) { - dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); - return -EINVAL; - } - - iface = sfp_select_interface(phydev->sfp_bus, sfp_support); - - /* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes - * interface for use with SFP modules. - * However, some copper modules detected as having a preferred SGMII - * interface do default to and function in 1000Base-X mode, so just - * print a warning and allow such modules, as they may have some chance - * of working. - */ - if (iface == PHY_INTERFACE_MODE_SGMII) - dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n"); - else if (iface != PHY_INTERFACE_MODE_1000BASEX) - return -EINVAL; - - return 0; -} - -static const struct sfp_upstream_ops at803x_sfp_ops = { - .attach = phy_sfp_attach, - .detach = phy_sfp_detach, - .module_insert = at803x_sfp_insert, -}; - static int at803x_parse_dt(struct phy_device *phydev) { struct device_node *node = phydev->mdio.dev.of_node; @@ -787,23 +643,6 @@ static int at803x_parse_dt(struct phy_device *phydev) priv->clk_25m_reg |= FIELD_PREP(AT803X_CLK_OUT_MASK, sel); priv->clk_25m_mask |= AT803X_CLK_OUT_MASK; - - /* Fixup for the AR8030/AR8035. This chip has another mask and - * doesn't support the DSP reference. Eg. the lowest bit of the - * mask. The upper two bits select the same frequencies. Mask - * the lowest bit here. - * - * Warning: - * There was no datasheet for the AR8030 available so this is - * just a guess. But the AR8035 is listed as pin compatible - * to the AR8030 so there might be a good chance it works on - * the AR8030 too. - */ - if (phydev->drv->phy_id == ATH8030_PHY_ID || - phydev->drv->phy_id == ATH8035_PHY_ID) { - priv->clk_25m_reg &= AT8035_CLK_OUT_MASK; - priv->clk_25m_mask &= AT8035_CLK_OUT_MASK; - } } ret = of_property_read_u32(node, "qca,clk-out-strength", &strength); @@ -825,30 +664,6 @@ static int at803x_parse_dt(struct phy_device *phydev) } } - /* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping - * options. - */ - if (phydev->drv->phy_id == ATH8031_PHY_ID) { - if (of_property_read_bool(node, "qca,keep-pll-enabled")) - priv->flags |= AT803X_KEEP_PLL_ENABLED; - - ret = at8031_register_regulators(phydev); - if (ret < 0) - return ret; - - ret = devm_regulator_get_enable_optional(&phydev->mdio.dev, - "vddio"); - if (ret) { - phydev_err(phydev, "failed to get VDDIO regulator\n"); - return ret; - } - - /* Only AR8031/8033 support 1000Base-X for SFP modules */ - ret = phy_sfp_probe(phydev, &at803x_sfp_ops); - if (ret < 0) - return ret; - } - return 0; } @@ -868,35 +683,6 @@ static int at803x_probe(struct phy_device *phydev) if (ret) return ret; - if (phydev->drv->phy_id == ATH8031_PHY_ID) { - int ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG); - int mode_cfg; - - if (ccr < 0) - return ccr; - mode_cfg = ccr & AT803X_MODE_CFG_MASK; - - switch (mode_cfg) { - case AT803X_MODE_CFG_BX1000_RGMII_50OHM: - case AT803X_MODE_CFG_BX1000_RGMII_75OHM: - priv->is_1000basex = true; - fallthrough; - case AT803X_MODE_CFG_FX100_RGMII_50OHM: - case AT803X_MODE_CFG_FX100_RGMII_75OHM: - priv->is_fiber = true; - break; - } - - /* Disable WoL in 1588 register which is enabled - * by default - */ - ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, - AT803X_PHY_MMD3_WOL_CTRL, - AT803X_WOL_EN, 0); - if (ret) - return ret; - } - return 0; } @@ -1004,27 +790,8 @@ static int at803x_hibernation_mode_config(struct phy_device *phydev) static int at803x_config_init(struct phy_device *phydev) { - struct at803x_priv *priv = phydev->priv; int ret; - if (phydev->drv->phy_id == ATH8031_PHY_ID) { - /* Some bootloaders leave the fiber page selected. - * Switch to the appropriate page (fiber or copper), as otherwise we - * read the PHY capabilities from the wrong page. - */ - phy_lock_mdio_bus(phydev); - ret = at803x_write_page(phydev, - priv->is_fiber ? AT803X_PAGE_FIBER : - AT803X_PAGE_COPPER); - phy_unlock_mdio_bus(phydev); - if (ret) - return ret; - - ret = at8031_pll_config(phydev); - if (ret < 0) - return ret; - } - /* The RX and TX delay default is: * after HW reset: RX delay enabled and TX delay disabled * after SW reset: RX delay enabled, while TX delay retains the @@ -1078,7 +845,6 @@ static int at803x_ack_interrupt(struct phy_device *phydev) static int at803x_config_intr(struct phy_device *phydev) { - struct at803x_priv *priv = phydev->priv; int err; int value; @@ -1095,10 +861,6 @@ static int at803x_config_intr(struct phy_device *phydev) value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED; value |= AT803X_INTR_ENABLE_LINK_FAIL; value |= AT803X_INTR_ENABLE_LINK_SUCCESS; - if (priv->is_fiber) { - value |= AT803X_INTR_ENABLE_LINK_FAIL_BX; - value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX; - } err = phy_write(phydev, AT803X_INTR_ENABLE, value); } else { @@ -1164,7 +926,8 @@ static void at803x_link_change_notify(struct phy_device *phydev) } } -static int at803x_read_specific_status(struct phy_device *phydev) +static int at803x_read_specific_status(struct phy_device *phydev, + struct at803x_ss_mask ss_mask) { int ss; @@ -1183,11 +946,8 @@ static int at803x_read_specific_status(struct phy_device *phydev) if (sfc < 0) return sfc; - /* qca8081 takes the different bits for speed value from at803x */ - if (phydev->drv->phy_id == QCA8081_PHY_ID) - speed = FIELD_GET(QCA808X_SS_SPEED_MASK, ss); - else - speed = FIELD_GET(AT803X_SS_SPEED_MASK, ss); + speed = ss & ss_mask.speed_mask; + speed >>= ss_mask.speed_shift; switch (speed) { case AT803X_SS_SPEED_10: @@ -1232,6 +992,7 @@ static int at803x_read_specific_status(struct phy_device *phydev) static int at803x_read_status(struct phy_device *phydev) { struct at803x_priv *priv = phydev->priv; + struct at803x_ss_mask ss_mask = { 0 }; int err, old_link = phydev->link; if (priv->is_1000basex) @@ -1255,7 +1016,9 @@ static int at803x_read_status(struct phy_device *phydev) if (err < 0) return err; - err = at803x_read_specific_status(phydev); + ss_mask.speed_mask = AT803X_SS_SPEED_MASK; + ss_mask.speed_shift = __bf_shf(AT803X_SS_SPEED_MASK); + err = at803x_read_specific_status(phydev, ss_mask); if (err < 0) return err; @@ -1288,9 +1051,8 @@ static int at803x_config_mdix(struct phy_device *phydev, u8 ctrl) FIELD_PREP(AT803X_SFC_MDI_CROSSOVER_MODE_M, val)); } -static int at803x_config_aneg(struct phy_device *phydev) +static int at803x_prepare_config_aneg(struct phy_device *phydev) { - struct at803x_priv *priv = phydev->priv; int ret; ret = at803x_config_mdix(phydev, phydev->mdix_ctrl); @@ -1307,33 +1069,22 @@ static int at803x_config_aneg(struct phy_device *phydev) return ret; } - if (priv->is_1000basex) - return genphy_c37_config_aneg(phydev); - - /* Do not restart auto-negotiation by setting ret to 0 defautly, - * when calling __genphy_config_aneg later. - */ - ret = 0; - - if (phydev->drv->phy_id == QCA8081_PHY_ID) { - int phy_ctrl = 0; + return 0; +} - /* The reg MII_BMCR also needs to be configured for force mode, the - * genphy_config_aneg is also needed. - */ - if (phydev->autoneg == AUTONEG_DISABLE) - genphy_c45_pma_setup_forced(phydev); +static int at803x_config_aneg(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + int ret; - if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising)) - phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G; + ret = at803x_prepare_config_aneg(phydev); + if (ret) + return ret; - ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, - MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl); - if (ret < 0) - return ret; - } + if (priv->is_1000basex) + return genphy_c37_config_aneg(phydev); - return __genphy_config_aneg(phydev, ret); + return genphy_config_aneg(phydev); } static int at803x_get_downshift(struct phy_device *phydev, u8 *d) @@ -1465,31 +1216,16 @@ static int at803x_cdt_fault_length(u16 status) return (dt * 824) / 10; } -static int at803x_cdt_start(struct phy_device *phydev, int pair) +static int at803x_cdt_start(struct phy_device *phydev, + u32 cdt_start) { - u16 cdt; - - /* qca8081 takes the different bit 15 to enable CDT test */ - if (phydev->drv->phy_id == QCA8081_PHY_ID) - cdt = QCA808X_CDT_ENABLE_TEST | - QCA808X_CDT_LENGTH_UNIT | - QCA808X_CDT_INTER_CHECK_DIS; - else - cdt = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) | - AT803X_CDT_ENABLE_TEST; - - return phy_write(phydev, AT803X_CDT, cdt); + return phy_write(phydev, AT803X_CDT, cdt_start); } -static int at803x_cdt_wait_for_completion(struct phy_device *phydev) +static int at803x_cdt_wait_for_completion(struct phy_device *phydev, + u32 cdt_en) { int val, ret; - u16 cdt_en; - - if (phydev->drv->phy_id == QCA8081_PHY_ID) - cdt_en = QCA808X_CDT_ENABLE_TEST; - else - cdt_en = AT803X_CDT_ENABLE_TEST; /* One test run takes about 25ms */ ret = phy_read_poll_timeout(phydev, AT803X_CDT, val, @@ -1509,11 +1245,13 @@ static int at803x_cable_test_one_pair(struct phy_device *phydev, int pair) }; int ret, val; - ret = at803x_cdt_start(phydev, pair); + val = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) | + AT803X_CDT_ENABLE_TEST; + ret = at803x_cdt_start(phydev, val); if (ret) return ret; - ret = at803x_cdt_wait_for_completion(phydev); + ret = at803x_cdt_wait_for_completion(phydev, AT803X_CDT_ENABLE_TEST); if (ret) return ret; @@ -1535,19 +1273,11 @@ static int at803x_cable_test_one_pair(struct phy_device *phydev, int pair) } static int at803x_cable_test_get_status(struct phy_device *phydev, - bool *finished) + bool *finished, unsigned long pair_mask) { - unsigned long pair_mask; int retries = 20; int pair, ret; - if (phydev->phy_id == ATH9331_PHY_ID || - phydev->phy_id == ATH8032_PHY_ID || - phydev->phy_id == QCA9561_PHY_ID) - pair_mask = 0x3; - else - pair_mask = 0xf; - *finished = false; /* According to the datasheet the CDT can be performed when @@ -1574,7 +1304,7 @@ static int at803x_cable_test_get_status(struct phy_device *phydev, return 0; } -static int at803x_cable_test_start(struct phy_device *phydev) +static void at803x_cable_test_autoneg(struct phy_device *phydev) { /* Enable auto-negotiation, but advertise no capabilities, no link * will be established. A restart of the auto-negotiation is not @@ -1582,15 +1312,347 @@ static int at803x_cable_test_start(struct phy_device *phydev) */ phy_write(phydev, MII_BMCR, BMCR_ANENABLE); phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA); - if (phydev->phy_id != ATH9331_PHY_ID && - phydev->phy_id != ATH8032_PHY_ID && - phydev->phy_id != QCA9561_PHY_ID) - phy_write(phydev, MII_CTRL1000, 0); +} +static int at803x_cable_test_start(struct phy_device *phydev) +{ + at803x_cable_test_autoneg(phydev); /* we do all the (time consuming) work later */ return 0; } +static int at8031_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev, + unsigned int selector) +{ + struct phy_device *phydev = rdev_get_drvdata(rdev); + + if (selector) + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, + 0, AT803X_DEBUG_RGMII_1V8); + else + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, + AT803X_DEBUG_RGMII_1V8, 0); +} + +static int at8031_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev) +{ + struct phy_device *phydev = rdev_get_drvdata(rdev); + int val; + + val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F); + if (val < 0) + return val; + + return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0; +} + +static const struct regulator_ops vddio_regulator_ops = { + .list_voltage = regulator_list_voltage_table, + .set_voltage_sel = at8031_rgmii_reg_set_voltage_sel, + .get_voltage_sel = at8031_rgmii_reg_get_voltage_sel, +}; + +static const unsigned int vddio_voltage_table[] = { + 1500000, + 1800000, +}; + +static const struct regulator_desc vddio_desc = { + .name = "vddio", + .of_match = of_match_ptr("vddio-regulator"), + .n_voltages = ARRAY_SIZE(vddio_voltage_table), + .volt_table = vddio_voltage_table, + .ops = &vddio_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, +}; + +static const struct regulator_ops vddh_regulator_ops = { +}; + +static const struct regulator_desc vddh_desc = { + .name = "vddh", + .of_match = of_match_ptr("vddh-regulator"), + .n_voltages = 1, + .fixed_uV = 2500000, + .ops = &vddh_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, +}; + +static int at8031_register_regulators(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + struct device *dev = &phydev->mdio.dev; + struct regulator_config config = { }; + + config.dev = dev; + config.driver_data = phydev; + + priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config); + if (IS_ERR(priv->vddio_rdev)) { + phydev_err(phydev, "failed to register VDDIO regulator\n"); + return PTR_ERR(priv->vddio_rdev); + } + + priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config); + if (IS_ERR(priv->vddh_rdev)) { + phydev_err(phydev, "failed to register VDDH regulator\n"); + return PTR_ERR(priv->vddh_rdev); + } + + return 0; +} + +static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) +{ + struct phy_device *phydev = upstream; + __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support); + __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); + DECLARE_PHY_INTERFACE_MASK(interfaces); + phy_interface_t iface; + + linkmode_zero(phy_support); + phylink_set(phy_support, 1000baseX_Full); + phylink_set(phy_support, 1000baseT_Full); + phylink_set(phy_support, Autoneg); + phylink_set(phy_support, Pause); + phylink_set(phy_support, Asym_Pause); + + linkmode_zero(sfp_support); + sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces); + /* Some modules support 10G modes as well as others we support. + * Mask out non-supported modes so the correct interface is picked. + */ + linkmode_and(sfp_support, phy_support, sfp_support); + + if (linkmode_empty(sfp_support)) { + dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); + return -EINVAL; + } + + iface = sfp_select_interface(phydev->sfp_bus, sfp_support); + + /* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes + * interface for use with SFP modules. + * However, some copper modules detected as having a preferred SGMII + * interface do default to and function in 1000Base-X mode, so just + * print a warning and allow such modules, as they may have some chance + * of working. + */ + if (iface == PHY_INTERFACE_MODE_SGMII) + dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n"); + else if (iface != PHY_INTERFACE_MODE_1000BASEX) + return -EINVAL; + + return 0; +} + +static const struct sfp_upstream_ops at8031_sfp_ops = { + .attach = phy_sfp_attach, + .detach = phy_sfp_detach, + .module_insert = at8031_sfp_insert, +}; + +static int at8031_parse_dt(struct phy_device *phydev) +{ + struct device_node *node = phydev->mdio.dev.of_node; + struct at803x_priv *priv = phydev->priv; + int ret; + + if (of_property_read_bool(node, "qca,keep-pll-enabled")) + priv->flags |= AT803X_KEEP_PLL_ENABLED; + + ret = at8031_register_regulators(phydev); + if (ret < 0) + return ret; + + ret = devm_regulator_get_enable_optional(&phydev->mdio.dev, + "vddio"); + if (ret) { + phydev_err(phydev, "failed to get VDDIO regulator\n"); + return ret; + } + + /* Only AR8031/8033 support 1000Base-X for SFP modules */ + return phy_sfp_probe(phydev, &at8031_sfp_ops); +} + +static int at8031_probe(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + int mode_cfg; + int ccr; + int ret; + + ret = at803x_probe(phydev); + if (ret) + return ret; + + /* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping + * options. + */ + ret = at8031_parse_dt(phydev); + if (ret) + return ret; + + ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG); + if (ccr < 0) + return ccr; + mode_cfg = ccr & AT803X_MODE_CFG_MASK; + + switch (mode_cfg) { + case AT803X_MODE_CFG_BX1000_RGMII_50OHM: + case AT803X_MODE_CFG_BX1000_RGMII_75OHM: + priv->is_1000basex = true; + fallthrough; + case AT803X_MODE_CFG_FX100_RGMII_50OHM: + case AT803X_MODE_CFG_FX100_RGMII_75OHM: + priv->is_fiber = true; + break; + } + + /* Disable WoL in 1588 register which is enabled + * by default + */ + return phy_modify_mmd(phydev, MDIO_MMD_PCS, + AT803X_PHY_MMD3_WOL_CTRL, + AT803X_WOL_EN, 0); +} + +static int at8031_config_init(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + int ret; + + /* Some bootloaders leave the fiber page selected. + * Switch to the appropriate page (fiber or copper), as otherwise we + * read the PHY capabilities from the wrong page. + */ + phy_lock_mdio_bus(phydev); + ret = at803x_write_page(phydev, + priv->is_fiber ? AT803X_PAGE_FIBER : + AT803X_PAGE_COPPER); + phy_unlock_mdio_bus(phydev); + if (ret) + return ret; + + ret = at8031_pll_config(phydev); + if (ret < 0) + return ret; + + return at803x_config_init(phydev); +} + +static int at8031_set_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol) +{ + int ret; + + /* First setup MAC address and enable WOL interrupt */ + ret = at803x_set_wol(phydev, wol); + if (ret) + return ret; + + if (wol->wolopts & WAKE_MAGIC) + /* Enable WOL function for 1588 */ + ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, + AT803X_PHY_MMD3_WOL_CTRL, + 0, AT803X_WOL_EN); + else + /* Disable WoL function for 1588 */ + ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, + AT803X_PHY_MMD3_WOL_CTRL, + AT803X_WOL_EN, 0); + + return ret; +} + +static int at8031_config_intr(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + int err, value = 0; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED && + priv->is_fiber) { + /* Clear any pending interrupts */ + err = at803x_ack_interrupt(phydev); + if (err) + return err; + + value |= AT803X_INTR_ENABLE_LINK_FAIL_BX; + value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX; + + err = phy_set_bits(phydev, AT803X_INTR_ENABLE, value); + if (err) + return err; + } + + return at803x_config_intr(phydev); +} + +/* AR8031 and AR8035 share the same cable test get status reg */ +static int at8031_cable_test_get_status(struct phy_device *phydev, + bool *finished) +{ + return at803x_cable_test_get_status(phydev, finished, 0xf); +} + +/* AR8031 and AR8035 share the same cable test start logic */ +static int at8031_cable_test_start(struct phy_device *phydev) +{ + at803x_cable_test_autoneg(phydev); + phy_write(phydev, MII_CTRL1000, 0); + /* we do all the (time consuming) work later */ + return 0; +} + +/* AR8032, AR9331 and QCA9561 share the same cable test get status reg */ +static int at8032_cable_test_get_status(struct phy_device *phydev, + bool *finished) +{ + return at803x_cable_test_get_status(phydev, finished, 0x3); +} + +static int at8035_parse_dt(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + + /* Mask is set by the generic at803x_parse_dt + * if property is set. Assume property is set + * with the mask not zero. + */ + if (priv->clk_25m_mask) { + /* Fixup for the AR8030/AR8035. This chip has another mask and + * doesn't support the DSP reference. Eg. the lowest bit of the + * mask. The upper two bits select the same frequencies. Mask + * the lowest bit here. + * + * Warning: + * There was no datasheet for the AR8030 available so this is + * just a guess. But the AR8035 is listed as pin compatible + * to the AR8030 so there might be a good chance it works on + * the AR8030 too. + */ + priv->clk_25m_reg &= AT8035_CLK_OUT_MASK; + priv->clk_25m_mask &= AT8035_CLK_OUT_MASK; + } + + return 0; +} + +/* AR8030 and AR8035 shared the same special mask for clk_25m */ +static int at8035_probe(struct phy_device *phydev) +{ + int ret; + + ret = at803x_probe(phydev); + if (ret) + return ret; + + return at8035_parse_dt(phydev); +} + static int qca83xx_config_init(struct phy_device *phydev) { u8 switch_revision; @@ -1616,27 +1678,26 @@ static int qca83xx_config_init(struct phy_device *phydev) break; } + /* Following original QCA sourcecode set port to prefer master */ + phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER); + + return 0; +} + +static int qca8327_config_init(struct phy_device *phydev) +{ /* QCA8327 require DAC amplitude adjustment for 100m set to +6%. * Disable on init and enable only with 100m speed following * qca original source code. */ - if (phydev->drv->phy_id == QCA8327_A_PHY_ID || - phydev->drv->phy_id == QCA8327_B_PHY_ID) - at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, - QCA8327_DEBUG_MANU_CTRL_EN, 0); + at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, + QCA8327_DEBUG_MANU_CTRL_EN, 0); - /* Following original QCA sourcecode set port to prefer master */ - phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER); - - return 0; + return qca83xx_config_init(phydev); } static void qca83xx_link_change_notify(struct phy_device *phydev) { - /* QCA8337 doesn't require DAC Amplitude adjustement */ - if (phydev->drv->phy_id == QCA8337_PHY_ID) - return; - /* Set DAC Amplitude adjustment to +6% for 100m on link running */ if (phydev->state == PHY_RUNNING) { if (phydev->speed == SPEED_100) @@ -1679,19 +1740,6 @@ static int qca83xx_resume(struct phy_device *phydev) static int qca83xx_suspend(struct phy_device *phydev) { - u16 mask = 0; - - /* Only QCA8337 support actual suspend. - * QCA8327 cause port unreliability when phy suspend - * is set. - */ - if (phydev->drv->phy_id == QCA8337_PHY_ID) { - genphy_suspend(phydev); - } else { - mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX); - phy_modify(phydev, MII_BMCR, mask, 0); - } - at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN, AT803X_DEBUG_GATE_CLK_IN1000, 0); @@ -1702,6 +1750,27 @@ static int qca83xx_suspend(struct phy_device *phydev) return 0; } +static int qca8337_suspend(struct phy_device *phydev) +{ + /* Only QCA8337 support actual suspend. */ + genphy_suspend(phydev); + + return qca83xx_suspend(phydev); +} + +static int qca8327_suspend(struct phy_device *phydev) +{ + u16 mask = 0; + + /* QCA8327 cause port unreliability when phy suspend + * is set. + */ + mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX); + phy_modify(phydev, MII_BMCR, mask, 0); + + return qca83xx_suspend(phydev); +} + static int qca808x_phy_fast_retrain_config(struct phy_device *phydev) { int ret; @@ -1806,6 +1875,7 @@ static int qca808x_config_init(struct phy_device *phydev) static int qca808x_read_status(struct phy_device *phydev) { + struct at803x_ss_mask ss_mask = { 0 }; int ret; ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT); @@ -1819,7 +1889,10 @@ static int qca808x_read_status(struct phy_device *phydev) if (ret) return ret; - ret = at803x_read_specific_status(phydev); + /* qca8081 takes the different bits for speed value from at803x */ + ss_mask.speed_mask = QCA808X_SS_SPEED_MASK; + ss_mask.speed_shift = __bf_shf(QCA808X_SS_SPEED_MASK); + ret = at803x_read_specific_status(phydev, ss_mask); if (ret < 0) return ret; @@ -1968,11 +2041,14 @@ static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finish *finished = false; - ret = at803x_cdt_start(phydev, 0); + val = QCA808X_CDT_ENABLE_TEST | + QCA808X_CDT_LENGTH_UNIT | + QCA808X_CDT_INTER_CHECK_DIS; + ret = at803x_cdt_start(phydev, val); if (ret) return ret; - ret = at803x_cdt_wait_for_completion(phydev); + ret = at803x_cdt_wait_for_completion(phydev, QCA808X_CDT_ENABLE_TEST); if (ret) return ret; @@ -2040,6 +2116,32 @@ static int qca808x_get_features(struct phy_device *phydev) return 0; } +static int qca808x_config_aneg(struct phy_device *phydev) +{ + int phy_ctrl = 0; + int ret; + + ret = at803x_prepare_config_aneg(phydev); + if (ret) + return ret; + + /* The reg MII_BMCR also needs to be configured for force mode, the + * genphy_config_aneg is also needed. + */ + if (phydev->autoneg == AUTONEG_DISABLE) + genphy_c45_pma_setup_forced(phydev); + + if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising)) + phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G; + + ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, + MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl); + if (ret < 0) + return ret; + + return __genphy_config_aneg(phydev, ret); +} + static void qca808x_link_change_notify(struct phy_device *phydev) { /* Assert interface sgmii fifo on link down, deassert it on link up, @@ -2056,7 +2158,7 @@ static struct phy_driver at803x_driver[] = { PHY_ID_MATCH_EXACT(ATH8035_PHY_ID), .name = "Qualcomm Atheros AR8035", .flags = PHY_POLL_CABLE_TEST, - .probe = at803x_probe, + .probe = at8035_probe, .config_aneg = at803x_config_aneg, .config_init = at803x_config_init, .soft_reset = genphy_soft_reset, @@ -2070,14 +2172,14 @@ static struct phy_driver at803x_driver[] = { .handle_interrupt = at803x_handle_interrupt, .get_tunable = at803x_get_tunable, .set_tunable = at803x_set_tunable, - .cable_test_start = at803x_cable_test_start, - .cable_test_get_status = at803x_cable_test_get_status, + .cable_test_start = at8031_cable_test_start, + .cable_test_get_status = at8031_cable_test_get_status, }, { /* Qualcomm Atheros AR8030 */ .phy_id = ATH8030_PHY_ID, .name = "Qualcomm Atheros AR8030", .phy_id_mask = AT8030_PHY_ID_MASK, - .probe = at803x_probe, + .probe = at8035_probe, .config_init = at803x_config_init, .link_change_notify = at803x_link_change_notify, .set_wol = at803x_set_wol, @@ -2092,11 +2194,11 @@ static struct phy_driver at803x_driver[] = { PHY_ID_MATCH_EXACT(ATH8031_PHY_ID), .name = "Qualcomm Atheros AR8031/AR8033", .flags = PHY_POLL_CABLE_TEST, - .probe = at803x_probe, - .config_init = at803x_config_init, + .probe = at8031_probe, + .config_init = at8031_config_init, .config_aneg = at803x_config_aneg, .soft_reset = genphy_soft_reset, - .set_wol = at803x_set_wol, + .set_wol = at8031_set_wol, .get_wol = at803x_get_wol, .suspend = at803x_suspend, .resume = at803x_resume, @@ -2104,12 +2206,12 @@ static struct phy_driver at803x_driver[] = { .write_page = at803x_write_page, .get_features = at803x_get_features, .read_status = at803x_read_status, - .config_intr = &at803x_config_intr, + .config_intr = at8031_config_intr, .handle_interrupt = at803x_handle_interrupt, .get_tunable = at803x_get_tunable, .set_tunable = at803x_set_tunable, - .cable_test_start = at803x_cable_test_start, - .cable_test_get_status = at803x_cable_test_get_status, + .cable_test_start = at8031_cable_test_start, + .cable_test_get_status = at8031_cable_test_get_status, }, { /* Qualcomm Atheros AR8032 */ PHY_ID_MATCH_EXACT(ATH8032_PHY_ID), @@ -2124,7 +2226,7 @@ static struct phy_driver at803x_driver[] = { .config_intr = at803x_config_intr, .handle_interrupt = at803x_handle_interrupt, .cable_test_start = at803x_cable_test_start, - .cable_test_get_status = at803x_cable_test_get_status, + .cable_test_get_status = at8032_cable_test_get_status, }, { /* ATHEROS AR9331 */ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID), @@ -2134,10 +2236,10 @@ static struct phy_driver at803x_driver[] = { .resume = at803x_resume, .flags = PHY_POLL_CABLE_TEST, /* PHY_BASIC_FEATURES */ - .config_intr = &at803x_config_intr, + .config_intr = at803x_config_intr, .handle_interrupt = at803x_handle_interrupt, .cable_test_start = at803x_cable_test_start, - .cable_test_get_status = at803x_cable_test_get_status, + .cable_test_get_status = at8032_cable_test_get_status, .read_status = at803x_read_status, .soft_reset = genphy_soft_reset, .config_aneg = at803x_config_aneg, @@ -2150,10 +2252,10 @@ static struct phy_driver at803x_driver[] = { .resume = at803x_resume, .flags = PHY_POLL_CABLE_TEST, /* PHY_BASIC_FEATURES */ - .config_intr = &at803x_config_intr, + .config_intr = at803x_config_intr, .handle_interrupt = at803x_handle_interrupt, .cable_test_start = at803x_cable_test_start, - .cable_test_get_status = at803x_cable_test_get_status, + .cable_test_get_status = at8032_cable_test_get_status, .read_status = at803x_read_status, .soft_reset = genphy_soft_reset, .config_aneg = at803x_config_aneg, @@ -2163,15 +2265,14 @@ static struct phy_driver at803x_driver[] = { .phy_id_mask = QCA8K_PHY_ID_MASK, .name = "Qualcomm Atheros 8337 internal PHY", /* PHY_GBIT_FEATURES */ - .link_change_notify = qca83xx_link_change_notify, .probe = at803x_probe, .flags = PHY_IS_INTERNAL, .config_init = qca83xx_config_init, .soft_reset = genphy_soft_reset, - .get_sset_count = at803x_get_sset_count, - .get_strings = at803x_get_strings, - .get_stats = at803x_get_stats, - .suspend = qca83xx_suspend, + .get_sset_count = qca83xx_get_sset_count, + .get_strings = qca83xx_get_strings, + .get_stats = qca83xx_get_stats, + .suspend = qca8337_suspend, .resume = qca83xx_resume, }, { /* QCA8327-A from switch QCA8327-AL1A */ @@ -2182,12 +2283,12 @@ static struct phy_driver at803x_driver[] = { .link_change_notify = qca83xx_link_change_notify, .probe = at803x_probe, .flags = PHY_IS_INTERNAL, - .config_init = qca83xx_config_init, + .config_init = qca8327_config_init, .soft_reset = genphy_soft_reset, - .get_sset_count = at803x_get_sset_count, - .get_strings = at803x_get_strings, - .get_stats = at803x_get_stats, - .suspend = qca83xx_suspend, + .get_sset_count = qca83xx_get_sset_count, + .get_strings = qca83xx_get_strings, + .get_stats = qca83xx_get_stats, + .suspend = qca8327_suspend, .resume = qca83xx_resume, }, { /* QCA8327-B from switch QCA8327-BL1A */ @@ -2198,12 +2299,12 @@ static struct phy_driver at803x_driver[] = { .link_change_notify = qca83xx_link_change_notify, .probe = at803x_probe, .flags = PHY_IS_INTERNAL, - .config_init = qca83xx_config_init, + .config_init = qca8327_config_init, .soft_reset = genphy_soft_reset, - .get_sset_count = at803x_get_sset_count, - .get_strings = at803x_get_strings, - .get_stats = at803x_get_stats, - .suspend = qca83xx_suspend, + .get_sset_count = qca83xx_get_sset_count, + .get_strings = qca83xx_get_strings, + .get_stats = qca83xx_get_stats, + .suspend = qca8327_suspend, .resume = qca83xx_resume, }, { /* Qualcomm QCA8081 */ @@ -2218,7 +2319,7 @@ static struct phy_driver at803x_driver[] = { .set_wol = at803x_set_wol, .get_wol = at803x_get_wol, .get_features = qca808x_get_features, - .config_aneg = at803x_config_aneg, + .config_aneg = qca808x_config_aneg, .suspend = genphy_suspend, .resume = genphy_resume, .read_status = qca808x_read_status, |