diff options
Diffstat (limited to 'drivers/net/ethernet/xilinx')
| -rw-r--r-- | drivers/net/ethernet/xilinx/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/xilinx/ll_temac_main.c | 5 | ||||
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 6 | ||||
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_emaclite.c | 236 |
4 files changed, 122 insertions, 129 deletions
diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig index 122d60c0481b..7b90a5eba099 100644 --- a/drivers/net/ethernet/xilinx/Kconfig +++ b/drivers/net/ethernet/xilinx/Kconfig @@ -5,7 +5,7 @@ config NET_VENDOR_XILINX bool "Xilinx devices" default y - depends on PPC || PPC32 || MICROBLAZE + depends on PPC || PPC32 || MICROBLAZE || ARCH_ZYNQ ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from @@ -20,7 +20,7 @@ if NET_VENDOR_XILINX config XILINX_EMACLITE tristate "Xilinx 10/100 Ethernet Lite support" - depends on (PPC32 || MICROBLAZE) + depends on (PPC32 || MICROBLAZE || ARCH_ZYNQ) select PHYLIB ---help--- This driver supports the 10/100 Ethernet Lite from Xilinx. diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c index 57c2e5ef2804..58eb4488beff 100644 --- a/drivers/net/ethernet/xilinx/ll_temac_main.c +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -1007,7 +1007,7 @@ static int temac_of_probe(struct platform_device *op) return -ENOMEM; ether_setup(ndev); - dev_set_drvdata(&op->dev, ndev); + platform_set_drvdata(op, ndev); SET_NETDEV_DEV(ndev, &op->dev); ndev->flags &= ~IFF_MULTICAST; /* clear multicast */ ndev->features = NETIF_F_SG | NETIF_F_FRAGLIST; @@ -1136,7 +1136,7 @@ static int temac_of_probe(struct platform_device *op) static int temac_of_remove(struct platform_device *op) { - struct net_device *ndev = dev_get_drvdata(&op->dev); + struct net_device *ndev = platform_get_drvdata(op); struct temac_local *lp = netdev_priv(ndev); temac_mdio_teardown(lp); @@ -1145,7 +1145,6 @@ static int temac_of_remove(struct platform_device *op) if (lp->phy_node) of_node_put(lp->phy_node); lp->phy_node = NULL; - dev_set_drvdata(&op->dev, NULL); iounmap(lp->regs); if (lp->sdma_regs) iounmap(lp->sdma_regs); diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 24748e8367a1..fb7d1c28a2ea 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -1484,7 +1484,7 @@ static int axienet_of_probe(struct platform_device *op) return -ENOMEM; ether_setup(ndev); - dev_set_drvdata(&op->dev, ndev); + platform_set_drvdata(op, ndev); SET_NETDEV_DEV(ndev, &op->dev); ndev->flags &= ~IFF_MULTICAST; /* clear multicast */ @@ -1622,7 +1622,7 @@ nodev: static int axienet_of_remove(struct platform_device *op) { - struct net_device *ndev = dev_get_drvdata(&op->dev); + struct net_device *ndev = platform_get_drvdata(op); struct axienet_local *lp = netdev_priv(ndev); axienet_mdio_teardown(lp); @@ -1632,8 +1632,6 @@ static int axienet_of_remove(struct platform_device *op) of_node_put(lp->phy_node); lp->phy_node = NULL; - dev_set_drvdata(&op->dev, NULL); - iounmap(lp->regs); if (lp->dma_regs) iounmap(lp->dma_regs); diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index b7268b3dae77..fd4dbdae5331 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -2,9 +2,9 @@ * Xilinx EmacLite Linux driver for the Xilinx Ethernet MAC Lite device. * * This is a new flat driver which is based on the original emac_lite - * driver from John Williams <[email protected]>. + * driver from John Williams <[email protected]>. * - * 2007-2009 (c) Xilinx, Inc. + * 2007 - 2013 (c) Xilinx, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -159,34 +159,32 @@ static void xemaclite_enable_interrupts(struct net_local *drvdata) u32 reg_data; /* Enable the Tx interrupts for the first Buffer */ - reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET); - out_be32(drvdata->base_addr + XEL_TSR_OFFSET, - reg_data | XEL_TSR_XMIT_IE_MASK); + reg_data = __raw_readl(drvdata->base_addr + XEL_TSR_OFFSET); + __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK, + drvdata->base_addr + XEL_TSR_OFFSET); /* Enable the Tx interrupts for the second Buffer if * configured in HW */ if (drvdata->tx_ping_pong != 0) { - reg_data = in_be32(drvdata->base_addr + + reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); - out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_TSR_OFFSET, - reg_data | XEL_TSR_XMIT_IE_MASK); + __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK, + drvdata->base_addr + XEL_BUFFER_OFFSET + + XEL_TSR_OFFSET); } /* Enable the Rx interrupts for the first buffer */ - out_be32(drvdata->base_addr + XEL_RSR_OFFSET, - XEL_RSR_RECV_IE_MASK); + __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + XEL_RSR_OFFSET); /* Enable the Rx interrupts for the second Buffer if * configured in HW */ if (drvdata->rx_ping_pong != 0) { - out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_RSR_OFFSET, - XEL_RSR_RECV_IE_MASK); + __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET); } /* Enable the Global Interrupt Enable */ - out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK); + __raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); } /** @@ -201,37 +199,37 @@ static void xemaclite_disable_interrupts(struct net_local *drvdata) u32 reg_data; /* Disable the Global Interrupt Enable */ - out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK); + __raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); /* Disable the Tx interrupts for the first buffer */ - reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET); - out_be32(drvdata->base_addr + XEL_TSR_OFFSET, - reg_data & (~XEL_TSR_XMIT_IE_MASK)); + reg_data = __raw_readl(drvdata->base_addr + XEL_TSR_OFFSET); + __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK), + drvdata->base_addr + XEL_TSR_OFFSET); /* Disable the Tx interrupts for the second Buffer * if configured in HW */ if (drvdata->tx_ping_pong != 0) { - reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + + reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); - out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_TSR_OFFSET, - reg_data & (~XEL_TSR_XMIT_IE_MASK)); + __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK), + drvdata->base_addr + XEL_BUFFER_OFFSET + + XEL_TSR_OFFSET); } /* Disable the Rx interrupts for the first buffer */ - reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET); - out_be32(drvdata->base_addr + XEL_RSR_OFFSET, - reg_data & (~XEL_RSR_RECV_IE_MASK)); + reg_data = __raw_readl(drvdata->base_addr + XEL_RSR_OFFSET); + __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK), + drvdata->base_addr + XEL_RSR_OFFSET); /* Disable the Rx interrupts for the second buffer * if configured in HW */ if (drvdata->rx_ping_pong != 0) { - reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + + reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET); - out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_RSR_OFFSET, - reg_data & (~XEL_RSR_RECV_IE_MASK)); + __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK), + drvdata->base_addr + XEL_BUFFER_OFFSET + + XEL_RSR_OFFSET); } } @@ -351,7 +349,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data, byte_count = ETH_FRAME_LEN; /* Check if the expected buffer is available */ - reg_data = in_be32(addr + XEL_TSR_OFFSET); + reg_data = __raw_readl(addr + XEL_TSR_OFFSET); if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK)) == 0) { @@ -364,7 +362,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data, addr = (void __iomem __force *)((u32 __force)addr ^ XEL_BUFFER_OFFSET); - reg_data = in_be32(addr + XEL_TSR_OFFSET); + reg_data = __raw_readl(addr + XEL_TSR_OFFSET); if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK)) != 0) @@ -375,15 +373,16 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data, /* Write the frame to the buffer */ xemaclite_aligned_write(data, (u32 __force *) addr, byte_count); - out_be32(addr + XEL_TPLR_OFFSET, (byte_count & XEL_TPLR_LENGTH_MASK)); + __raw_writel((byte_count & XEL_TPLR_LENGTH_MASK), + addr + XEL_TPLR_OFFSET); /* Update the Tx Status Register to indicate that there is a * frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which * is used by the interrupt handler to check whether a frame * has been transmitted */ - reg_data = in_be32(addr + XEL_TSR_OFFSET); + reg_data = __raw_readl(addr + XEL_TSR_OFFSET); reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK); - out_be32(addr + XEL_TSR_OFFSET, reg_data); + __raw_writel(reg_data, addr + XEL_TSR_OFFSET); return 0; } @@ -408,7 +407,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data) addr = (drvdata->base_addr + drvdata->next_rx_buf_to_use); /* Verify which buffer has valid data */ - reg_data = in_be32(addr + XEL_RSR_OFFSET); + reg_data = __raw_readl(addr + XEL_RSR_OFFSET); if ((reg_data & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) { if (drvdata->rx_ping_pong != 0) @@ -425,14 +424,14 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data) return 0; /* No data was available */ /* Verify that buffer has valid data */ - reg_data = in_be32(addr + XEL_RSR_OFFSET); + reg_data = __raw_readl(addr + XEL_RSR_OFFSET); if ((reg_data & XEL_RSR_RECV_DONE_MASK) != XEL_RSR_RECV_DONE_MASK) return 0; /* No data was available */ } /* Get the protocol type of the ethernet frame that arrived */ - proto_type = ((ntohl(in_be32(addr + XEL_HEADER_OFFSET + + proto_type = ((ntohl(__raw_readl(addr + XEL_HEADER_OFFSET + XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) & XEL_RPLR_LENGTH_MASK); @@ -441,7 +440,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data) if (proto_type > (ETH_FRAME_LEN + ETH_FCS_LEN)) { if (proto_type == ETH_P_IP) { - length = ((ntohl(in_be32(addr + + length = ((ntohl(__raw_readl(addr + XEL_HEADER_IP_LENGTH_OFFSET + XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) & @@ -463,9 +462,9 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data) data, length); /* Acknowledge the frame */ - reg_data = in_be32(addr + XEL_RSR_OFFSET); + reg_data = __raw_readl(addr + XEL_RSR_OFFSET); reg_data &= ~XEL_RSR_RECV_DONE_MASK; - out_be32(addr + XEL_RSR_OFFSET, reg_data); + __raw_writel(reg_data, addr + XEL_RSR_OFFSET); return length; } @@ -492,14 +491,14 @@ static void xemaclite_update_address(struct net_local *drvdata, xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN); - out_be32(addr + XEL_TPLR_OFFSET, ETH_ALEN); + __raw_writel(ETH_ALEN, addr + XEL_TPLR_OFFSET); /* Update the MAC address in the EmacLite */ - reg_data = in_be32(addr + XEL_TSR_OFFSET); - out_be32(addr + XEL_TSR_OFFSET, reg_data | XEL_TSR_PROG_MAC_ADDR); + reg_data = __raw_readl(addr + XEL_TSR_OFFSET); + __raw_writel(reg_data | XEL_TSR_PROG_MAC_ADDR, addr + XEL_TSR_OFFSET); /* Wait for EmacLite to finish with the MAC address update */ - while ((in_be32(addr + XEL_TSR_OFFSET) & + while ((__raw_readl(addr + XEL_TSR_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0) ; } @@ -669,31 +668,32 @@ static irqreturn_t xemaclite_interrupt(int irq, void *dev_id) u32 tx_status; /* Check if there is Rx Data available */ - if ((in_be32(base_addr + XEL_RSR_OFFSET) & XEL_RSR_RECV_DONE_MASK) || - (in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET) + if ((__raw_readl(base_addr + XEL_RSR_OFFSET) & + XEL_RSR_RECV_DONE_MASK) || + (__raw_readl(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET) & XEL_RSR_RECV_DONE_MASK)) xemaclite_rx_handler(dev); /* Check if the Transmission for the first buffer is completed */ - tx_status = in_be32(base_addr + XEL_TSR_OFFSET); + tx_status = __raw_readl(base_addr + XEL_TSR_OFFSET); if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; - out_be32(base_addr + XEL_TSR_OFFSET, tx_status); + __raw_writel(tx_status, base_addr + XEL_TSR_OFFSET); tx_complete = true; } /* Check if the Transmission for the second buffer is completed */ - tx_status = in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); + tx_status = __raw_readl(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; - out_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET, - tx_status); + __raw_writel(tx_status, base_addr + XEL_BUFFER_OFFSET + + XEL_TSR_OFFSET); tx_complete = true; } @@ -726,7 +726,7 @@ static int xemaclite_mdio_wait(struct net_local *lp) /* wait for the MDIO interface to not be busy or timeout after some time. */ - while (in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET) & + while (__raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET) & XEL_MDIOCTRL_MDIOSTS_MASK) { if (end - jiffies <= 0) { WARN_ON(1); @@ -762,17 +762,17 @@ static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg) * MDIO Address register. Set the Status bit in the MDIO Control * register to start a MDIO read transaction. */ - ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET); - out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET, - XEL_MDIOADDR_OP_MASK | - ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg)); - out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET, - ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK); + ctrl_reg = __raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET); + __raw_writel(XEL_MDIOADDR_OP_MASK | + ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg), + lp->base_addr + XEL_MDIOADDR_OFFSET); + __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, + lp->base_addr + XEL_MDIOCTRL_OFFSET); if (xemaclite_mdio_wait(lp)) return -ETIMEDOUT; - rc = in_be32(lp->base_addr + XEL_MDIORD_OFFSET); + rc = __raw_readl(lp->base_addr + XEL_MDIORD_OFFSET); dev_dbg(&lp->ndev->dev, "xemaclite_mdio_read(phy_id=%i, reg=%x) == %x\n", @@ -809,13 +809,13 @@ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg, * Data register. Finally, set the Status bit in the MDIO Control * register to start a MDIO write transaction. */ - ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET); - out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET, - ~XEL_MDIOADDR_OP_MASK & - ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg)); - out_be32(lp->base_addr + XEL_MDIOWR_OFFSET, val); - out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET, - ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK); + ctrl_reg = __raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET); + __raw_writel(~XEL_MDIOADDR_OP_MASK & + ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg), + lp->base_addr + XEL_MDIOADDR_OFFSET); + __raw_writel(val, lp->base_addr + XEL_MDIOWR_OFFSET); + __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, + lp->base_addr + XEL_MDIOCTRL_OFFSET); return 0; } @@ -848,24 +848,39 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) int rc; struct resource res; struct device_node *np = of_get_parent(lp->phy_node); + struct device_node *npp; /* Don't register the MDIO bus if the phy_node or its parent node * can't be found. */ - if (!np) + if (!np) { + dev_err(dev, "Failed to register mdio bus.\n"); return -ENODEV; + } + npp = of_get_parent(np); + + of_address_to_resource(npp, 0, &res); + if (lp->ndev->mem_start != res.start) { + struct phy_device *phydev; + phydev = of_phy_find_device(lp->phy_node); + if (!phydev) + dev_info(dev, + "MDIO of the phy is not registered yet\n"); + return 0; + } /* Enable the MDIO bus by asserting the enable bit in MDIO Control * register. */ - out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET, - XEL_MDIOCTRL_MDIOEN_MASK); + __raw_writel(XEL_MDIOCTRL_MDIOEN_MASK, + lp->base_addr + XEL_MDIOCTRL_OFFSET); bus = mdiobus_alloc(); - if (!bus) + if (!bus) { + dev_err(dev, "Failed to allocate mdiobus\n"); return -ENOMEM; + } - of_address_to_resource(np, 0, &res); snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx", (unsigned long long)res.start); bus->priv = lp; @@ -879,8 +894,10 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) lp->mii_bus = bus; rc = of_mdiobus_register(bus, np); - if (rc) + if (rc) { + dev_err(dev, "Failed to register mdio bus.\n"); goto err_register; + } return 0; @@ -896,7 +913,7 @@ err_register: * There's nothing in the Emaclite device to be configured when the link * state changes. We just print the status. */ -void xemaclite_adjust_link(struct net_device *ndev) +static void xemaclite_adjust_link(struct net_device *ndev) { struct net_local *lp = netdev_priv(ndev); struct phy_device *phy = lp->phy_dev; @@ -1058,13 +1075,14 @@ static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev) * This function un maps the IO region of the Emaclite device and frees the net * device. */ -static void xemaclite_remove_ndev(struct net_device *ndev) +static void xemaclite_remove_ndev(struct net_device *ndev, + struct platform_device *pdev) { if (ndev) { struct net_local *lp = netdev_priv(ndev); if (lp->base_addr) - iounmap((void __iomem __force *) (lp->base_addr)); + devm_iounmap(&pdev->dev, lp->base_addr); free_netdev(ndev); } } @@ -1110,8 +1128,7 @@ static struct net_device_ops xemaclite_netdev_ops; */ static int xemaclite_of_probe(struct platform_device *ofdev) { - struct resource r_irq; /* Interrupt resources */ - struct resource r_mem; /* IO mem resources */ + struct resource *res; struct net_device *ndev = NULL; struct net_local *lp = NULL; struct device *dev = &ofdev->dev; @@ -1121,20 +1138,6 @@ static int xemaclite_of_probe(struct platform_device *ofdev) dev_info(dev, "Device Tree Probing\n"); - /* Get iospace for the device */ - rc = of_address_to_resource(ofdev->dev.of_node, 0, &r_mem); - if (rc) { - dev_err(dev, "invalid address\n"); - return rc; - } - - /* Get IRQ for the device */ - rc = of_irq_to_resource(ofdev->dev.of_node, 0, &r_irq); - if (!rc) { - dev_err(dev, "no IRQ found\n"); - return rc; - } - /* Create an ethernet device instance */ ndev = alloc_etherdev(sizeof(struct net_local)); if (!ndev) @@ -1143,30 +1146,28 @@ static int xemaclite_of_probe(struct platform_device *ofdev) dev_set_drvdata(dev, ndev); SET_NETDEV_DEV(ndev, &ofdev->dev); - ndev->irq = r_irq.start; - ndev->mem_start = r_mem.start; - ndev->mem_end = r_mem.end; - lp = netdev_priv(ndev); lp->ndev = ndev; - if (!request_mem_region(ndev->mem_start, - ndev->mem_end - ndev->mem_start + 1, - DRIVER_NAME)) { - dev_err(dev, "Couldn't lock memory region at %p\n", - (void *)ndev->mem_start); - rc = -EBUSY; - goto error2; + /* Get IRQ for the device */ + res = platform_get_resource(ofdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(dev, "no IRQ found\n"); + goto error; } - /* Get the virtual base address for the device */ - lp->base_addr = ioremap(r_mem.start, resource_size(&r_mem)); - if (NULL == lp->base_addr) { - dev_err(dev, "EmacLite: Could not allocate iomem\n"); - rc = -EIO; - goto error1; + ndev->irq = res->start; + + res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); + lp->base_addr = devm_ioremap_resource(&ofdev->dev, res); + if (IS_ERR(lp->base_addr)) { + rc = PTR_ERR(lp->base_addr); + goto error; } + ndev->mem_start = res->start; + ndev->mem_end = res->end; + spin_lock_init(&lp->reset_lock); lp->next_tx_buf_to_use = 0x0; lp->next_rx_buf_to_use = 0x0; @@ -1181,8 +1182,8 @@ static int xemaclite_of_probe(struct platform_device *ofdev) dev_warn(dev, "No MAC address found\n"); /* Clear the Tx CSR's in case this is a restart */ - out_be32(lp->base_addr + XEL_TSR_OFFSET, 0); - out_be32(lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET, 0); + __raw_writel(0, lp->base_addr + XEL_TSR_OFFSET); + __raw_writel(0, lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); /* Set the MAC address in the EmacLite device */ xemaclite_update_address(lp, ndev->dev_addr); @@ -1203,7 +1204,7 @@ static int xemaclite_of_probe(struct platform_device *ofdev) if (rc) { dev_err(dev, "Cannot register network device, aborting\n"); - goto error1; + goto error; } dev_info(dev, @@ -1212,11 +1213,8 @@ static int xemaclite_of_probe(struct platform_device *ofdev) (unsigned int __force)lp->base_addr, ndev->irq); return 0; -error1: - release_mem_region(ndev->mem_start, resource_size(&r_mem)); - -error2: - xemaclite_remove_ndev(ndev); +error: + xemaclite_remove_ndev(ndev, ofdev); return rc; } @@ -1251,9 +1249,7 @@ static int xemaclite_of_remove(struct platform_device *of_dev) of_node_put(lp->phy_node); lp->phy_node = NULL; - release_mem_region(ndev->mem_start, ndev->mem_end-ndev->mem_start + 1); - - xemaclite_remove_ndev(ndev); + xemaclite_remove_ndev(ndev, of_dev); dev_set_drvdata(dev, NULL); return 0; |